|
|
|
|
|
|
FUTEK Advanced Sensor Technologies Multi Axis Load Cell are designed to measure a multiple of forces and moments simultaneously with a single Load Cell.
Multi Axis Load Cells can accurately measure up to six components (3 forces and 3 moments) of load. For example, Independent strain gauge bridges are used to measure three directions of force: Longitude, Latitude, and Vertical, as well as, the moments about each force direction. Separate receptacles or cables are provided for each axis of measurement. A careful structural analysis has been done to isolate the forces and moments, which results in a reduction of cross-talk sensitivities.
All designs are one piece flexures, machined and gauged to give optimum output, stiffness and durability. For example, one of our more innovative designs, the Stick Shift/Gear Shift Knob Transducer offers a lightweight, robust feature comprised of Anodized Aluminum and weighing as little as 9 oz. Its special ergonomically designed cover contains anti-slip notches for proper handling coupled with less hand strain on the user.
|
|
Multi-component force measurement places high demands on the measuring device. The characteristics of the force vector to be measured largely determine the result. The size and direction of the force application point, as well as the dynamics, should have as little effect as possible on the process.
With the new Kistler Type 9327, 9347, 9367 and 9377 sensors, our company's established experience and know-how is now available even for multi-component force measurements carried out by the customer. The precisely preloaded measuring elements are easy to fit and, as they come ready calibrated from the factory, they can be used immediately for multi-component force measurements.
|
|
Series 261A
Triaxial 3-component dynamic force link, ICP®
- Automotive Chassis and Other Vehicle Dynamic Measurements
- Monitor Cutting Tool Forces and Detect Tool Wear
- Provide Feedback for Force Limited Vibration Testing
- Measure Input Forces for Modal and Structural Testing
- Measure Impact Forces During Drop Testing and Crash Testing
|
|
DS Europe produces load cells with built-in analog and digital electronics.
Measuring ranges:from 0 to 6Kg up to 500tons max.
Outputs: CANOpen, RS485, RS422, 5V, 10V, 4-20mA, 2mV/V.
Advantages: high resolution (A/D converter 24bit max.), high sampling rate (from 7,5 upt to 960Hz max.), electrical noise protection, compactness, digital alarms, digital filter, zeroing, easy to service (overload memory).
Applications: automation, textile machines, medical machines, machine tools, presses, vehicles, weighing, food machines, quary machines, agricolture machines, research, machines working paper-wood-plastics-rubber etc.
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
Catridge Style Load Cells
Ultra Cartridge-Style Load Cells provide a highly responsive linear output signal for measuring, monitoring and controlling web tension in continuous processes. They utilize a full-bridge semiconductor strain gages and a temperature compensation network for consistent accuracy and performance. For application flexibility and convenient machine installation, Ultra Cartridge Style Transducers are available for stationary shafts, for wire or narrow webs, and with flange and pillow block mounting kits.
|
|
Ultra ISC Tension Load Cell : Web Tension Control
The Ultra ISC is a tension transducer that directly outputs a +/- 10 VDC signal. CMC offers an ISC version for all models of our Ultra tension transducers. All Ultra ISC transducers include an Integrated Signal Conditioner (ISC) that is embedded directly in the "Ultra" type tension load cells. This is accomplished by extending the connector housing one inch and inserting a proprietary integrated amplifier designed by CMC.
|
|
|
|
|
|
BZH Measuring direction horizontal, up to 6300 N
The web tension load cells of the series BZH are of a compact pillow block design and suitable for a variety of applications.
The sensors basically consist of two mounting plates which are connected by measuring elements. The mounting plates are designed to accommodate pillow block bearings of the following manufactures: INA, FAG, SKF and NSK.
The measuring elements function according to the double beam principle. The acting forces are captured by strain gauges applied to the measuring elements.
HAEHNE offers for all its sensors a corresponding range of amplifiers to condition the measuring signal and deliver the bridge voltage supply. The signals at the output terminals of the amplifier are proportional to the acting radial force. They can be digitally displayed or used as actual values in a closed control loop.
Features
Compact load cell design
Easy modification to different pillow block bearing designs and sizes
High overload protection utilising mechanical stops
High resonant frequency
|
|
DS Europe manufactures load cells with built-in CE marked electronics with analog or digital outputs.
All load cells with non amplified output 2mV/V have a built in calibration circuitry that electrically simulates a known value of force shown in a certificate ( making It easy and quick to calibrate with the external electronics getting the signal ).
Series 500QD single point load cells Ranges (tension and compression): from 0 up to ±2 ... 2000Kg FS.
Built-in electronics (option): analog or digital outputs.
Environmental protection: IP65.
Compensated against off-center forces.
Series AP7000 compact column load cells Series AP7000 tension and compression load cell.
Ranges: from 0 up to 250-500Kg 1-3-5-10-25-50-100 tons.
Built-in electronics (option): analog or digital outputs.
Environmental protection: IP65.
|
|
DS Europe produces general purpose miniaturised load cells.
Measuring ranges: 0 to 3 up to 2000Kg.
Output: 2mV/V.
Applications: automation, medical machines ( dialisis, radiology, blood transfusion machines, dentist tools, hospital beds, stabilometry platforms etc.), textile machines, machines working paper-rubber-plastics, weighing, machine tools and wherever is required compactness.
|
|
Output: 0/4-20 mA (±20 mA)
Accuracy class: 0,1 %
Input Range: 0,25-3,0 mV/V
Loadcell excitation: 10 VDC
Loadcell current: Max 200 mA
Nonlinearity: Max 0.02 %
Power Supply: 24 VDC
Case: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
|
|
|
|
For over a decade, FUTEK Advanced Sensor Technology has been supporting the Automotive Industries’ sensor requirements in endurance testing, validation, verification and qualification. Our Automotive Load Cells are designed to fit a wide range of applications from component testing to full assembly. Specialty products such as our Low Profile Spike Resistant Pedal Force Sensor, Bi-Axial Stick Shift Sensor, and Compact Seat Belt Sensor are selected and fully trusted product throughout the Automotive Industry.
Any of our Automotive Load Cells can be easily modified or customized to meet your requirements. The standard models are often available in our stock making it available for 24 hour shipping. All Load cells and Force Transducers are manufactured in the US. All Sensors are available with in-line signal conditioned amplifier and or TEDS / IEEE1451.4 option.
• Custom Strain Relief
• One piece construction suitable for endurance testing
• Low Profile Height
• Light Weight
• Available in Tension, Compression, and Multi-Component Loads
• Removable Mounting Plate
• Spike Resistant
• Excellent Off Center Loading
• Operating Temperature of -60° F - 200° F
• Capacity ranging from 10 lb to 100,000 lbs
• Utilizes Metal Foil Strain Gauge Technology
|
|
The OIML certified beam load cells SD are used for general weighing in tough environments, in bench- and platform scales, belt scales and in production equipment.
* Accuracy classes C1, C2, C3, C6 (MI10) to OIML R60
* High overload and sideload capacity 250 to 1.000 %
* Uncomplicated mechanical installation without protecting devices
* Patented high reliability sensor - stainless steel, laser welded to IP68
* Uncomplicated electrical installation - coax cable only
* RS485, Profibus DP, DeviceNet, Modbus to PLC's, PC's, etc. and OIML certified weighing displays
* Withstands welding voltages and ESD to IEC 1000-4-4
* ATEX approved version available (type SDE)
|
|
FLINTEC load cells are designed to meet the most stringent
accuracy requirements. Certifications have been obtained
from Weights & Measures Authorities, worldwide.
Bending Beam load cells are available in the capacities 500lb to 10kN and include Accuracy Classifications GP,
C1, C3, C3 MI 7.5, C4 and C4 MI 7.5 according to OIML R 60;
NTEP nmax=5000.
They offer total stainless steel construction and complete
hermetic sealing, making them suitable for use in the toughest industrial environments.
The Flintec calibration technique (in mV/V/Ω) eliminates time consuming corner calibration in multiple load cell systems.
ATEX versions available.
|
|
FUTEK’s Bending Beam Load Cell category offer slim designs with an excellent endurance making them ideal for OEM applications. One clear advantage is the models miniature size. Overload Protection is also available on select models.
The standard Bending Beam Load Cell can be modified or customized to meet your requirements and most models are available in our inventory making it available for quick delivery. Similar to our entire Load Cell product line this model is manufactured in US and uses metal foil strain gauge technology.
Ideal for OEM Applications
In both Tension & Compression
Single Point Construction
Low Capacity
Built in Overload Protection (select models)
Strain Gauge Based
|
|
|
|
|
|
BT Series Load Cell
The BT serie bending beam is designed for tension or compression loading applications including bench scales,conveyor weighing and vertical filling machines.The stainless steel bellow contruction makes the complete system impervious to hostile environments and washdown applications.
RT Series Load Cell
This high capacity single point loadcell is designed for direct mounting of large weigh platforms.it is suitable for a wide range of applications,including bench scales,check weighing,counting scales and process weighing.A humidty resistant protective coating assures long-term stability.the rt serie is constructed in special aluminium and sealed to IP 66.
PL Series Load Cell
PL is designed for direct mounting of midsize weigh platforms.It is suitable for a wide range of applications,including bench scals check weighing ,counting scales and process weighing.A humidty resistant protective coating assures long-term stability.the PL serie is constructed in special aluminium and sealed to IP 66.
PS Series Load Cell
Altough the PS-4X is designed for low cost weighing platforms ,it finds application invertical filling machines as well.Its small size special aluminium construction and Ip66 sealing makes PS serie suited for bench and counting scales.
|
|
APPLICATIONS:
The bending load cell type 54 can be used in small loading capacity weighing systems.
Some applications are :
- Belt conveyor scale and weight feeders
- Small weighing platforms
- Weighing in hopper, tanks, etc.
MAIN FEATURES:
- Water-proof
- Universal use
- Stainless steel body with bellow microplasma soldered
- High precision (equivalent to OIML C3)
NOMINAL LOAD: kg 2-5-10-20-50-100-200-300-500
|
|
VE4 - BENDING BEAM LOAD CELL
APPLICATIONS
-Washdown/Corrosive Environments
- Process Control Weighing
- Belt and Bagging Scales
- Tank, Bin and Hopper Weighing
- Reactor, Mixer and Blender Weighing
FEATURES
- 5 Kg to 500 Kg Capacities
- Compact Size
- 0.03% Accuracy Class
- Stainless Steel Design
- Welded, Hermetic Sealing
- Environmentally Sealed-IP66/67
- Companion Weigh Modules
- Two Year Warranty
|
|
Block load sensors are used if the measuring roller, due to spare parts stocking, must feature the same dimensions as a machine guide roller.
Block load sensor PD 7
Block load sensors for the installation of pedestal bearings with standard guide rollers.
Steel version for dry applications and stainless steel versions for wet applications.
- Different sizes
- Nominal measuring forces 1 - 70 kN
- High operational reliability due to mechanical overload protection
|
|
Pillow Block Load Cells
- for tension rolls supported by two bearings
- analog or fieldbus amplifiers / interface
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
FLINTEC load cells are designed to meet the most stringent
accuracy requirements. Certifications have been obtained
from Weights & Measures Authorities, worldwide.
Rocker column load cells are available in the capacities
7.5 t to 300 t and include Accuracy Classifications GP, C1, C3, C4, and C3 MI 8 according toOIML R60; NTEP nmax=10000.
They offer total stainless steel construction and complete
hermetic sealing, making them suitable for use in the toughest industrial environments.
This load cell design, in combination with a low cost self
aligning rocker assembly, unites excellent load introduction
with a low profile outline.
The Flintec calibration technique (in mV/V/Ω) eliminates time consuming corner calibration in multiple load cell systems.
ATEX versions are availiable.
|
|
Load Cells manufactured in US by FUTEK Advanced Sensor Technology (FUTEK), a leading manufacturer producing a huge selection of Load Cells, utilizing one of the most advanced technologies in the Sensor Industry: Metal foil strain gauge technology.
A Load Cell is defined as a transducer that converts an input mechanical force into an electrical output signal. Load Cells are also commonly known as Load Transducers or Load Sensors.
|
|
- A suitable loadcell can be selected among the various
models of the loadcells.
- Convenient for measuring in dangerous area due to the
separated loadcell model.
- Convenient for measuring in small area.
|
|
Can be used in high loading capacity weighing system. Some applications are: - Platforms scale - Weighing in iron and steel plants - Weighing in silos, hoppers, tanks, etc.
MAIN FATURES:
- Hose-proof (IP 66)
- Stainless steel
- Does not require horizontal stay rods
- Standard nominal load from 10 to 50 tons
- High precision (equivalent to OIML C3)
NOMINAL LOAD: ton 10-20-50
|
|
The LCMGD Series miniature low profile load cells are compression load cells with excellent long term stability. An all stainless steel construction assures reliability in severe industrial environments. These units are designed to operate by mounting on a flat surface, and they have a load button machined as an integral part of the basic load cell.
* 5-Point Calibration Certificate Included
* High Accuracy
* Low Profile
* Miniature Size
* All Stainless Steel Construction
|
|
Application
A high price/performance ratio and robust design characterize the compression load cells even in the high measuring ranges.
Their small dimensions allow these load cells to be used for measuring static and dynamic compressive forces in restricted spaces. These load cells can be integrated easily thanks to their standardized output and threaded holes on bottom.
The model 8526 load cell has a sealed body, allowing it to be used even under dirty and harsh industrial conditions.
These sensors are used as measuring elements mainly in- device manufacture
- production lines
- measurement and control systems
- manufacture of fixtures and special machines
- geological applications.
|
|
|
Minebea manufactures load cells that use strain gauges to convert weight into electrical out put. These products are used to display, record and control weight and other factors, for digital weight scales and measuring equipment.
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
|
Sensors of industrial weighing in shearing, entirely welded stainless and seals IP68. Sensor 3510 is especially used for applications of weighing on hoppers, plates of weighing, and applications of measure of force. Exist of 300 kg to 5000 kg with homologation IOLM in 3000 divisions
|
|
|
|
Weight sensors, Force sensors, Torque sensors
