|
|
Supplier of load cells work like calibrated industrial springs.
A force is applied and there is a flexion: there is a Wheatstone bridge with strain gages that measure this mechanical flexion thence giving a proportional electrical signal.
DS Europe can also manufacture load cells with built-in CE marked electronics with analog or digital outputs.
All load cells with non amplified output 2mV/V have a built in calibration circuitry that electrically simulates a known value of force shown in a certificate ( making It easy and quick to calibrate with the external electronics getting the signal ). |
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Professional interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital professional filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single professional wire coaxial wiring (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen manufacturers of load cells is covered worldwide by a number of patents. |
|
Weighing applications are served by an extensive line of manufacturers of load cells, including unique planar beam single point, shear and bending beam, compression and tension load cells.
|
|
FUTEK, a leading manufacturer producing a huge selection of Load cells, utilizes one of the most advanced technologies in the Sensor Industry: Metal foil stress gauge technology.
FUTEK's strain gauge based load cells are widely known in many industries to contain:
-The Highest accuracy which may conform to many standards from the Automotive to Aerospace.
-Robust Construction made of either high strength Stainless steel or Aluminum.
-A guarantee to perform at longest possible work life even at the most rigorous conditions
-A plethora of mounting options for ANY scale ANY-where.
-Competitive pricing that separates Futek Advanced Sensor Technology from the rest.
-A full gamut of selections with capacities ranging from 10 grams to 1 MILLION pounds.
FUTEK's industry listing is as broad as its Sensor selection. Our selection of load cells can be categorized by the following styles:
-AUTOMOTIVE RELATED (i.e. auto test measure devices: pedal, shifting, multi axial)
-BENDING BEAM
-COLUMN/CANISTER
-DONUT
-FOLD BACK BEAM
-FORCE DETECTOR
-LOAD/FORCE WASHER
-LOAD BUTTON
-MEDICAL RELATED
-OVERLOAD PROTECTION
-PANCAKE
-S BEAM/ Z BEAM
-THREAD FEMALE MOUNT
-THREAD MALE MOUNT
-THRU HOLE
-CLEVIS PINS
|
|
CM Force gage for compression applications
Range of measurement: from 100 to 50,000 Kg
Accuracy class: 0.1%
All stainless steel construction
Corrosion resistant
Internally generated calibration signal
Grade of protection: IP67 (DIN 40050)
TH Force transducer for tension/compression applications
Range of measurement: from 10 to 100 kN
Accuracy class: 0.1%
All stainless steel construction
Corrosion resistant
Internally generated calibration signal
Grade of protection: IP65 (DIN 40050)
|
|
HBM offers a comprehensive range of load cells and force transducers for weighing and force measurement applications, including customized solutions. All sensors are designed to work perfectly with our innovative measuring professional amplifier systems and our intuitive operating and
analyse software.
Load Cells
HBM weighing technology components can be found in almost all industries where goods are produced, processed or checked:
In the industrial production and scale equipment
In the manufacture of building materials
In the production of food and consumer goods
In the manufacture pharmaceutical products
In medical engineering.
Official PTB-approved certificates (the PTB is the national institute of natural and engineering sciences, and the highest technical authority for metrology and physical safety engineering in Germany) are available for a large number of load cells. Appropriate certificates are also available for worldwide use.
All standard load cells are available in accordance with European directive 94/9/EC (ATEX95).
Force Transducers
HBM force transducers are used today in every sector of industry and for R&D activities:
In the field of stress analysis
In manufacturing automation
In materials testing
In calibration.
|
|
| Honeywell Sensotec manufactures tension and compression manufacturer of load cells to cover a full range of applications. Rugged and fully welded, these stainless steel units provide accuracy up to 0.02% over ranges from 25 grams to 3 million pounds. Available unamplified, amplified or with digital output. |
|
Laumas Elettronica offers a complete range of manufacturers of load cells OIML R60 and ATEX certified.
Off-center; shear beam; bending beam; tension; compression; shaft; Pin; Anchor; for measuring the tension of wire rope.
We suggests for all the load cells a particular kind of mounting accessories in order to obtain a correct application of the cell and guarantees top performances and precision according to the mechanical, electrical and pneumatical connections present on the structure which has to be weighed. |
|
The Load-Force-Weight Sensor family is a complement to Magtrol's range of load measuring pins. These sensors can be used in different applications where the load measuring pin cannot be mounted. Our various executions and precision classes provide you with great flexibility for your application.
Used with our load monitoring unit or manufacturer of signal conditioners, Magtrol Load-Force-Weight Sensors constitute an ideal load and weighing measurement system which continuously checks for defined loads and overloads.
|
|
The load cell is the heart of the weighing instrument.
Our wide range can meet all you needs :
Bending beam load cell FA 3000 i
traction type load cell TA-I / TVN
Shear beam load cell CMA-S / CMI
Digital compression load cell ASL
Compression type load cell SCL 35/55 t
Compression type load cell CSP-M
Compression type load cell TSL |
|
| We have a comprehensive range of general purpose and specialist force gages including low range precision sensors and high capacity load cells. |
|
| Sartorius offers bending beam, compression and shear beam load cells as well as tension load cells, among others, for a wide variety of applications. |
|
SCAIME offers a wide range of force gages allowing to provide the best solution for all the weighing applications.
- Capacities from 1kg to 200t
- OIML R60 approval up to 6000d
- All modes of demounting of load:
Single point
Compression
Bending, shear beam
Traction
- Different materials and degrees from protection allowing to optimize the cost ratio/performance
- Complete range Certified ATEX
|
|
| You are working on an industrial application where you need "Force transducers"? A whole range of transducers can be integrated in your project easily. Your machine is operated by tension and/or compression force. Just have a look in the table hereunder? The Force transducer you are looking for is most certainly available. Do you need further information regarding the use of our industrial load cells? Natural Frequency? Accuracy? Use in radio-active environments? If the solution isn’t present on our website, don’t hesitate to contact our team of Sales Engineers. If you have a question, you’ll get the answer! Don’t forget to look at our customised solutions, because flexibility is part of our philosophy. Just test us. We guarantee a quick and professional advise /quotation. |
|
| Whether you need conventional solutions for regular tasks or you want to weigh something in a difficult location, Schenck Process, provides you everything you need from the standard unit to the weighing sensors that are capable of turning practically anything into a scale all from one source. Accuracies range from ± 0,05% to the highest precision legal-for-trade C5 and C4 Mi-7.5 (± 0.01%); we can provide the accuracy that meets your needs. For low weighing values from 5kg (11.02 Ibs) to heavy weigh values of 470 tons [metric] (518 tons [short]). Regardless of the environment where you intend to set up the weighing forms and installation conditions. Be it hazardous area applications, environmental conditions that require protection types up to IP 68 or hot applications with temperatures of up to 150°C (302°F). |
|
| The S400 range of 'button' style manufacturers of load cells was designed for those force measurement applications where space is at a premium. Constructed from 17-4PH stainless steel, the devices are available in full scale capacities from 50 lb to 1000 lb and are complete with shielded cable to custom lengths. |
|
The SW-D-FS Weigh Cell series cover the weighing range up to 2,000 g. They have been specifically conceived as compact sensor components, meaning they are especially suited for installation into multi-track applications and everywhere where small frame sizes are demanded.
By using GMP-tailored construction, all Weigh Cells are also suitable for use in pharmaceutical industrial plants. The Docking station facilitates a tool free exchange of the Weigh Cell during cleaning and service work.
All Weigh Cells in the SW-D-FS series operate based on the principle of electromagnetic force restoration. The system-dependent active self-damping ensures the shortest possible measuring times at simultaneously highest resolution. |
|
Description
The load cell suppliers LC-01 consists of a industrial pressure sensor with thread coupling (see separate data sheet) connected to a special oil filled path. When this path will be affected by load levels, the oil inside will be pressurised. This pressure is recorded by the membrane of the pressure senor.
In order to compensate for temperature influences, a high resolution temperature probe is integrated within the housing.
The housing is made of stainless steel and is terminated with an optical connection using a plastic tubing. Tubing lengths and connector specification can be specified following the needs of every application.
The sensor is single connectorised but can on request also be designed for series configurations.
Features
The load cell LC-01 can measure load levels and temperature with a resolution of 0,05% Full Scale and 0,1 °C respectively and an accuracy of 1% Full Scale and 1 °C respectively. The load level can be chosen between 1 and 150 bar.
Applications
The load cell LC-01 can be applied to measure load, earth an soil pressure as well as concrete stress. |
|
As manufacturing capability evolves and the demands for finer wire, filament and textile material increase, so does the need for tension control in extremely light applications. To meet this critical need MAGPOWR has developed the LC-500G, 500 gram load cell. With a full wheat-stone bridge strain gage configuration, the LC-500G meets the same industry leading specifications as all other MAGPOWR manufacturer of load cells. The LC-500G also employs 360 degrees of overload protection preventing the need for recalibration in the event of overload situations.
The LC-500G is designed to mount easily into almost any single strand installation. A pair of supplied jam nuts allow you to easily mount the unit into your machine frame with simple depth and orientation adjustment. The LC-500G is constructed from corrosion resistant, nickel-plated aluminum and is provided with a 1" diameter X 1/8" wide anodized aluminum pulley. For applications requiring special pulleys, the LC-500GS1 is available with provisions for a customer-supplied pulley. |
|
| For axial loads, force gages are commonly used. Where a standard cell is not available or will not perform, Teledyne Brown may be of assistance. We will design and manufacture a Custom Load Cell to unique requirements such as harsh environments, limited space, or high-overload conditions. |
|
Order Code Z-SG
Input: analog transducer (strain gauge load cell); digital (weighting)
Output: current, 0..20 / 4..20 mA; voltage, 0..5 / 0..10 V
Precision: 0.01%
DIN guide back side bus connection and RS232
(ModBUS) front communication jack
ModBUS RTU slave protocol, half duplex
Professional converter for manufacturer of load cells, mounting guide Din 46277, isolated to 1500 V (input-output-power supply). The transducer acquire signals from load cells (6-wire) and transmits the value with analogue standard (mA / V) and serial (ModBUS Rtu) output. It accepts up to N. 4 load cells (350 ohms) and also has a contact that can be configured as alarm or weighing stable (weighing in motion).
Extremely fast (sampling frequency set by 12.53 Hz at 151.71 Hz), it measures with sensibility from 1 to 128mV / V, and also has remote reset tare via serial or digital input.
Ideal to be used for weight complex measures, result of the action of multiple cells in parallel or with moving loads.
|
|
The LCT-01 is the world's most popular portable Load cell Professional tester.
It is a stand-alone portable hand-held device that was especially designed to help technical people immediately analyze the condition of strain-gage based load-cells.
The LCT fits all common types of load-cells available in the market today: four wires, 6 wires (with sense) and all rated gain outputs.
It provides the user with the essential data needed about the conditions of the tested load-cell, such as physical distortion (possibly caused by overload, shock load or metal fatigue), and electrical conditions (professional bridge resistance, shielding and resistance to ground).
The LCT allows the user to test the load-cell whether it is installed or removed. The unit is fully computerized and professional battery operated. A 16 x 2 alphanumeric Professional lcd display professional guides the operator through all test stages and clearly professional displays the results. |
|
Sensy designs and produces a broad range of standard and custom made load pin (clevis pin) for capacities from 0.25t (2.5kN) till 1500t (15MN) and more on request.
Force measurement on suppliers of hydraulic jacks, load limitation for hoisting equipments and industrial winches, force control on brake system, deported torque control on motors,...
|
|
| Load pin Transducers (also known as Shear Pin Sensors) measure loads using a strain gage element sensitive to shear loads. Using a laboratory calibration traceable to NIST, shear strain is related to load. Typical sizes range from 5/8 inch to 3.5 inch diameter. Two-component output is available for applications where loads are in the X & Y planes. |
|
Magtrol Load Measuring Pins are temperature-compensated transducers used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gages, allowing them to produce a signal proportional to the measured load.
Features:
From 2.5 to 1250 kN (0.28 to 140 tons)
Admissible overload: 150% of the nominal load
Overload at rupture: 350% to 700% of nominal load (according to the model)
Pin made of high resistance stainless steel.
Insensitive to external mechanical and chemical effects (strain gauges inside the pin)
Ideal for use in hostile environments
Rugged and tight construction; maintenance-free
For new or refitted installations
ISO 9001 Certified
|
|
SENSY is one of the most experimented companies in the load limitation for hoisting devices business, because of its 20 years experience in this field of activity. This is why we offer one of the largest product range on the market with strain gage technology suppliers of load cells and load pins, electronic load limiters and professional displays and also dynamometric shackles and wedge sockets.
When it goes about setting in conformity a hoisting equipment, you think about load limitation equipment for production or expedition department overhead cranes suppliers (EOT), harbour industrial cranes, … We talk then about heavy loads, Crane classification (FEM) and big investments. Men think that hoisting devices for smaller capacities do not deserve such investment. Therefore, we have developed a range of load cells and electronic load limiters for lower capacities hoisting equipments. We talk about load cells with fast and easy implementation combined with load limitation electronic with 1 or 3 set points. A cost effective solution for equipping your low and medium capacity overhead crane. |
|
|
|
Weight sensors, Force sensors, Torque sensors
