|
|
|
Piezo switch with ring illumination in various colors, IP68 waterproof rated, metal aluminum housing or STS, 50 million cycles. These push buttons are ideally for outdoor use and heavy traffic areas.
|
|
|
|
|
|
EAO, the Expert for Human Machine Interfaces, is now offering a switch with multicoloured “Halo” illumination for creating highly flexible displays. Designed for use with SMD LEDs, up to 10 different colours can be combined
in one switch: eight within the outer ring and an additional bi-colour LED in the centre. For designers and developers, this opens up new and previously unimagined possibilities.
Key characteristics:
Segmented illumination of the outer halo ring (actuator)
Up to 8 SMD LEDs can be positioned on the PCB
Additional bi-colour LED can be used with the switch element
Flat or raised plastic or aluminum lenses
Assembly:
The transparent actuator is mounted on the PCB by means of a newly developed flange with snap-on connector. The switch mounts into a 22.5 mm dia. mounting hole.
Typical applications:
The Series 84 can be utilised for a variety of applications:
Ticket machines
Instruments and medical devices
Machine and process controls
Audio, video, general lighting and stagecraft
|
|
Pushbuttons are switching devices which close and open electrical circuits. Actuators and contact chambers of pushbuttons are always integrated into one product (as opposed to control units). The "LUMOTAST" product families also include signal lamps, keylock and selector switches which are compatible with the pushbuttons in design and technology.
Illuminated pushbuttons, 8 mm range, mounting hole diameter 8 mm
LUMOTAST illuminated pushbutton range, mounting hole diameter 16,2 mm
LUMOTAST FK, with flat-ribbon cable connector
LUMOTAST 25, actuating area 25 x 25 mm
LUMOTAST 75, for up to 250V /4 A
Keylock switch, mounting hole diameter 16,2 mm
Other pushbuttons, mounting hole diameter 9,1 mm - 20,3 mm
|
|
General Purpose Illuminated Pushbutton Switches
Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment and many other commercial applications. A variety of options are available such as illuminated and non-illuminated versions, colored lens caps, lamp styles, and mounting styles.
Each pushbutton series offers a matching indicator for a consistent look. See the reference table below to quickly identify the required product. Then, refer to the selection table to determine the catalog number.
095 Series
Options:
T-1 lamps.
Special dead front and sunlight readable lenses legends.
Split legend lenses.
Military Snap-Switch, MS 8805.
|
|
The GE Push Button offering includes a complete line of pilot devices and stations for industrial and commecrial applications. They are available in 30mm and in 22mm sizes.
They are available in 30mm and in 22mm sizes.
The C-2000TM 22mm push button line has interchangeable components that snap together, simplifying assembly, reducing inventory requirements, and increasing flexibility.
Features and Benefits
Ultrasonically welded contact block - provide superior environmental protection.
Double bridge contacts - provide excellent performance even in low-voltage applications.
Permanently bonded front gasket-provide superior sealing against contaminants and makes installation foolproof.
|
|
FP01 (Contactless)
Illuminated Pushbutton Switches
GB (ultra-mini)
Fully Illuminated Plunger
HB (sub-mini)
Illuminated Pushbutton Switches
HB2 (sub-mini)
Illuminated Pushbutton Switches
KB (miniature)
Illuminated Pushbutton Switches
KP (miniature)
Silent Pushbutton Switches
LB (standard)
Illuminated Standard Size Pushbutton Switches
LP01 (miniature)
Illuminated Short Body Pushbutton Switches
UB (miniature)
Illuminated Single Element Pushbutton Switches
UB2 (miniature)
Illuminated Multi-Element Pushbutton Switches
YB (miniature)
Illuminated Bushing & Snap-in Switches
|
|
|
|
|
|
The SCHURTER product range contains:
METAL LINE SWITCHES:
The latching and momentary action switches from the Metal Line are extremely rugged, feature top quality and attractive design. The mechanical switches have a pleasant tactile feedback and switching currents up to 250 VAC. The piezo switches have a high lifetime of 20 mill. operations and are hermetically sealed according to IP69K.
SENSOR SWITCHES:
The capacitive switches from SCHURTER
PRINTMOUNT SWITCHES
FRONTPANEL SWITCHES
PUBLIC TRANSPORT SWITCH
MEMBRANE KEYPADS:
SCHURTER provides complete solutions in highest quality from the concept to the delivery of the systems. Various types of membrane keypads meet individual requirements of design and operating convenience.
SENSOR KEYPAD:
The capacitive sensor keypad from SCHURTER
METAL LINE KEYPADS:
The piezo keypads are resistant to all types of contamination and liquids. Their completely metallic front panels make them absolute vandal-proof.
TOUCH PANEL / TOUCH SCREENS:
The touch screens match perfectly to individual requirements by using different mounting versions and thicknesses of ITO glass. Analog-resistive touch screens in 4 - 5 - or 8-wire technology and capacitive touch screens are available in standard sizes or as customized versions. Matrix touch screens are individually manufactured.
HOUSING SYSTEMS AND FRONT PANELS:
SCHURTER develops and manufactures customer specific housing systems and front panels in anodized aluminum, steel and plastic.
|
|
This demonstration kit consists of a bicolor (Red/Green) SmartSwitch™. Where to
Purchase
This demonstration kit consists of a bicolor (Red/Green) SmartDisplay™. Where to
Purchase
Allows for portable display and demonstration of the bitmaps stored on the IS-DEM KIT-1 and the IS-DEM KIT-2.
Requires 4 AA alkaline batteries (not included).
Where to
Purchase
IS-DEV KIT-1: One SMARTSWITCH™ programmable LCD display module and two PCB mounted tact switches, with flash memory, power and programming connections.
Where to
Purchase
IS-DEV KIT-2 (pictured): Two SMARTSWITCH™ LCD programmable pushbutton switches on a PC board with flash memory, power and programming connections.
Where to
Purchase
IS-DEV KIT-3: Panel display including two SMARTSWITCH™ LCD pushbuttons and one SMARTSWITCH™ LCD display.
For purchase
contact factory.
|
|
|
|
|
|
Distinctive Characteristics :
Wide selection of illumination effects is achieved with single and bicolor, 1 - or 6-element LEDs in flat, beveled, or sculptured caps.
Alternating legends (patent pending) in choice of sculptured or flat caps, combined with super bright bicolor LED.
Combination of PCB mountability and short body allows use in compact applications.
Small behind panel dimension for snap-in mounting in tight spaces.
Snap-acting contact mechanism provides sensitive actuation with audible feedback; quick-make, quick-break characteristic limits arcing and prolongs electrical life.
Latchdown mechanism, independent of switching mechanism, gives outstanding stability and reliability plus visible and tactile indication of circuit status.
Terminals are epoxy sealed to lock out flux, solvents, and other contaminants.
Momentary and alternate action circuits available in the same space-saving body size.
Nonilluminated models available and shown in Pushbutton section.
Matching indicators available and shown at the end of Section M.
|
|
The Series 59 Maintained Action Switches further extends the comprehensive selection of Series 59 switches that are designed and manufactured by ITW.
The Series 59 Maintained Action switches are manufactured from PBT and are available in seven different button colours. The switches are panel sealed to IP67 and have an operating temperature range of -40 to +105 degrees C. The switches incorporate gold contacts and have both an electrical and mechanical life of at least 100k cycles.
|
|
The miniature single push-buttons ET5 are single-pole impulse buttons with one make contact and very small dimensions.
• Base 4,5x4,8mm only, overall height 4mm only.
• Positive tactile feedback.
• Snap-in connections suitable for automatic insert.
• Switching travel 0,2mm.
• Life expectancy >100000operations.
• Especially suited for miniaturized equipments in measurementandcontrol technology, electro medical, information and data equipments.
• Due to its small dimensions the button ET5 can be also used as a reliable switch in foil-keyboards.
• New! Also available as SMT version.
• Available in 200 piece embossed taping reels.
|
|
the Series 100 right angle miniature pushbutton switch is available in momentary or maintained action with a variety of keycap styles and colours. Ideal for high volume, low-cost electrical applications.
Key Features: Single or double pole, PCB terminals, silver contacts.
Contact rating 500mA, 30V DC, 800mA, 30V DC.
Initial Contact Resistance: 50 milliohms Max @ 5 VDC, 100mA.
|
|
The IP, IB, IS, IF and IA series offered by APEM are a range of pushbutton switches for panel mounting, sealed to IP67 and designed for harsh environments.
A large variety of models:
- Round or square
- Momentary or latching
- Illuminated or non-illuminated
- Plastic or metallic
- Bushing diameter 12 or 16 mm
- With solder lugs, quick-connect, straight PC or wire lead terminals
These minature pushbutton switches are generally available in a choice of 10 plunger colours and several bezel colours, including bright chrome and satin chrome. These colours feature excellent resistance to ultraviolet rays. All models with a flat actuator can be marked on request.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks.
|
|
The Series 59 is a range of miniature, momentary action, rugged, IP67 rated, panel sealed pushbutton switches. The series is available with square or round bezel versions, with or without LED status illumination.
A choice of body material is provided of either a non-spark zinc alloy or a hard wearing moulded PBT plastic.
The small size of the switch, its robustness and panel sealing make it ideal for use in harsh environments.
The mechanical life of the switch is 1,000,000 cycles (max), with an electrical life of 500,000 cycles (min).
Operating temperature range is -35 to +85 degrees C.
Panel thickness required is a minimum of 1.5mm to a maximum of 3.0mm.
|
|
|
EAO mushroom head push buttons with snap-action or momentary switching elements, protection up to IP65, and bevels for raised or flush mounting. The mushroom head push button is modular and can be modified with different lens shapes, colours and materials.
|
|
The 76-94 Series has been designed to cover a wide range of harsh environmental applications and is available in 3 styles, push-button, rotary and panel lamp.
The complete range is panel sealed to IP67 and due to the construction and the materials used, are all capable of surviving the impact of a 5kg mass dropped from 40cm.
All the bezels and the actuators of the push-buttons and rotaries are made from a non-sparking zinc alloy.
The range has solder/faston terminals as standard and options include custom colours, PCB terminals, gold contacts and 2 pole variants.
|
|
Vandalproof Stainless Steel Pushbutton Switches
18-22mm diameter
with and without Ring- or spot illumination
Standard and custom engraving option
various connection possibilities
|
|
The 76-94 Series has been designed to cover a wide range of harsh environmental applications and is available in 3 styles, push-button, rotary and panel lamp.
The complete range is panel sealed to IP67 and due to the construction and the materials used, are all capable of surviving the impact of a 5kg mass dropped from 40cm.
All the bezels and the actuators of the push-buttons and rotaries are made from a non-sparking zinc alloy.
The range has solder/faston terminals as standard and options include custom colours, PCB terminals, gold contacts and 2 pole variants.
|
|
Pendant Overview Directory
• Flexitite Push Button Stations
Crouse-Hinds Flexitite Pendant Push-Button Stations are steel reinforced, molded neoprene units designed for safer, low maintenance control of overhead cranes and hoists. They are available in two, four, six and eight buttons, single- and two-speeds, A. C. or D.C.
• Multi-Speed 6 & 8 Button Stations
• Side Mounted Toggle Hoist Switches
Molded neoprene enclosures. Rugged style provides qreater operator safety and resistance to chemical fumes, water, dirt and all other industrial environmental hazards. Up-down legend permanently molded into the side of switch. Rating to 250 volts, 10 amp.; switch permanently wired and molded to cord.
|
|
Pendant Switch
Remote hand held pushbutton switch with coiled cord that extends to approximately 4 feet.
Rating: 10 A resistive at 28 VDC
Circuit: SPNO-DB
Housing: Black Nylon
Button: Black Nylon
Cord: Black Polyurethane
Moisture-Proof Mini with Sealed Connector
The button is only .440 in. diameter. Back of panel cable is sealed at the switch and at the terminals. The cable is protected with split convoluted conduit. Button is black nylon. Case is black anodized aluminum alloy. Body is molded of black PPS.
Grip Switch Assembly
Switch is built into a grip designed for rugged outdoor use. Automotive type connector.
Rating: 5 A resistive at 28 VDC
Circuit: SPNC-DB
Housing: Black Nylon
Button: Black Nylon
Cord: Black Polyurethane, 20 AWG
Left and right hand operation with various connection types available.
|
|
Knobs and Knob Accessories
Features:
- modular collet knob system for various shaft diameters
- excellent surface finish (matt/glossy)
- special colors on request
New Soft touch and Classic Knobs
Features:
- Eye-catching design
- Great feel
- High durability
- Wide selection
- Multi-colored accessory program for the existing collet-knobs
- Available in soft-touch or traditional hard-touch
|
|
Look at our comprehensive tuning knobs programme and choose a knob that will fully meet your specific requirements.
Your advantages:
- Aesthetically pleasing knob design for a modern, innovative image for your equipment.
- Quickly available - standard versions available from stock.
- Large choice of types and number of accessories for individual applications.
- Well-proven for electro-mechanical rotary potentiometer with shaft ends or flattened ends.
- Different fixings: lateral screw fixing, collet fixture system or pinned onto the axes.
- NEW: STAR-KNOBS can be illuminated.
|
|
Standard or custom APEM pushbutton switches
- Miniature and industrial pushbuttons, for high or low current ratings
- For panel or PCB
- Momentary or latching
- Wide variety of button shapes: round, square, curved, flat, concave, high
- Actuator diameters from 2.5 to 25 mm
- Versions with LED illumination
- Sealed ranges for harsh environments (sealing up to IP68)
- Anti-vandal (vandal proof) stainless steel pushbuttons
- Long life piezo switches with easy to clean metal surface
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks.
|
|
|
|
|
|
Buttons and indicators diameter 22mm: available in round and square execution, with metal and thermoplastic guard, buttons ordinary, luminous, version step by step, emergency stops of safety, selectors up to 5 positions, indicator lamps in multiple achievements, vast range of accessories, systems of labelling, normal bulbs, neon, monoLED.
Buttons and indicators diameter 30mm: Vast range which deals with all the requirements of use in the difficult situations, buttons ordinary, luminous buttons, ordinary manipulators, selectors, luminous selectors, indicator lamps with transformer or resistor, mechanical buttons punch, fixings and selector n-key rollovers, buttons.
Components of order for safety: specific range of products devoted to the safety equipment for the machines. Innovating and ergonomic control devices: ordinary, luminous actuators with palm with mechanical system of fixing - portable Unit with accessories - Ordering of delegation of powers - bimanuelle Control panels with systems of socketed stanchion - Pedals.
Other products: push rods with palm, hanging button boxes, luminous columns, lighting of cupboards
|
|
• Ratings up to 16A, 250V ac
• Round and rectangular profiles
• Single and double pole
• Latching and momentary operation
• Illuminated and non-illuminated actuators
• Choice of lens & actuators
• Custom actuator options
• Front and sub panel mounting options
• Accessories include sealing covers
• RoHS compliant
|
|
|
Originally developed for use in the industrial sector, but increasingly employed in the automotive industry, the push buttons made by elobau are operated by magnets. Therefore, they achieve significantly more switching cycles than mechanical switching elements. LED-lit variants or variants with function and night lighting and symbols lasered onto the surface of the buttons are suitable for use on the outside of vehicles thanks to their high protection class.
|
|
• Ratings up to 16A, 250V ac
• Round and rectangular profiles
• Single and double pole
• Latching and momentary operation
• Illuminated and non-illuminated actuators
• Choice of lens & actuators
• Custom actuator options
• Front and sub panel mounting options
• Accessories include sealing covers
• RoHS compliant
|
|
Panel mounting on Ø 22.5 mm holes, IP65 protection rating, available
with “black” or “chrome” finish, EN418 emergency mushrooms, terminals with screws,
spring loaded or for printed circuit boards. Push button stations up to 3 gang or
enclosures up to 6 gang. Version for pneumatic systems available.
|
|
Honeywell pushbuttons and manual switches are designed by industrial designers to achieve a balance between harmonious appearance and ergonomics, and to accommodate a wide range of electrical and display design. Available in many shapes, sizes, configurations and colors to enhance manual operation with a flexible and attractive interface. The standard size includes pushbuttons, paddles, rockers, solid state indicators and electronic key locks with LED, incandescent and neon illumination, plus matching indicators and LED annunciators. A smaller version offers many of the same features in a space-saving size. Snap-in surface mount products are easy to apply, operate and maintain.
Best Used For:
Applications requiring manual operation such control boards and panels in industrial and test equipment, computer mainframes and peripherals, process control and medical instrumentation
|
|
In the "LUMOTAST" product range there are pushbuttons and signal lights, key and selector switches which are compatible in design and technology.
- Illuminated momentary pushbutton 8 mm series,
mounting hole diameter 8 mm
- LUMOTAST illuminated momentary pushbutton range,
mounting hole diameter 16,2 mm
- LUMOTAST FK, with flat-ribbon cable connector
- LUMOTAST 25, actuating area 25 x 25 mm
- LUMOTAST 75, up to 250V / 4 A
- Keylock switch, mounting hole diameter 16,2 mm
- Other pushbuttons, mounting hole diameter 9,1 mm - 20,3 mm
|
|
|
|
Switches: Push-button switches, Control devices
