|
|
TH-Contact panel mounted push-button switch
Panel cut-out (mm) Ø16.2/22.5
Characteristics • momentary or latching
• sealed IP40 or IP67
• wide range of bezels
• with or without illumination
• NO, NC, CO
• single or double pole contact blocks
Rating 250 VAC, 5A
Dimensions (mm) 18x18x43; 18x24x43
Ø18x43; Ø25x50
Actuator • lenses in different shapes and colours
Approvals UL, CSA, VDE
|
|
|
Yaskawa's Bestac oil-tight and waterproof 3 amp reed push-buttons offer industry-standard 30 mm diameter operators with a NEMA 4/13 enclosure rating. They are ideal for gaseous Class I, Division 2 hazardous locations where explosion-proof enclosures are not needed. These push-buttons are UL Listed and CSA Certified and have pilot duty inductive switch ratings of C300 (180VA) and Q150 (69VA). NEMA size 4 or larger contactors can be energized directly. Available operators are flush, half-shroud, full shroud, mushroom head, 2 position knob, and cylinder lock. Up to four contacts per operator can be used.
|
|
Features
- Choice of Momentary, Push-Pull (reset) and Cheat Interlock switches
- Snap-in panel mounting
- Long-life coil spring, snap-action mechanism
- Agency approved extended-life versions available
- VDE approval available on select models (F Series)
- Various terminal forms available (consult factory)
|
|
General Purpose Pushbutton Switches - AC Rated
These general purpose ac rated pushbutton switches offer a wide variety of configurations, button styles and termination types.
The 7835 and 7836 light duty series are ac only pushbutton switches. They feature Slow-make/Slow-break butt type contacts with a light operating pressure that is particularly suited to instrumentation applications.
Ratings:
See selection table.
Circuits: 1PST, 1PDT, 2PDT.
Momentary action.
Contact Material: 3-6A Rated
Movable - Silver plated copper.
Stationary - Silver plated copper.
10-15A Rated
Movable - Silver plated copper with fine or coin silver contact face button.
Stationary - Copper with fine or coin silver contact face button.
Terminal Types: Screw Terminals - Brass.
Furnished unassembled.
8448 Series
#6-32 x 3/16² binding head screws (Cat. No. 811-2).
8410/8411 Series
#5-40 x 3/16² (Cat. No. 811-7206).
8406/8440 Series
#5-40 x 5/32² screws (Cat. No. 11-26).
Solder Lug - Brass silver plated.
|
|
The GE Push Button offering includes a complete line of pilot devices and stations for industrial and commecrial applications. They are available in 30mm and in 22mm sizes.
The CR104P (30mm) line heavy-duty oiltight and watertight line is complete with a variety of accessories and enclosures
Features and Benefits
Greater torque - due to right sided ring design, greater torque can be applied during assembly and installation to provide oil tightness.
Ease of assembly - one screwcontact block mounting.
Multiple industrial environments - all units (except PTP) are suitable for use in NEMA type 1, 3, 3R, 4, 4x, 12 and 13 applications kes installation foolproof.
|
|
|
The AP series of pilot lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cutout diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside the panel. Termination is via solder terminals of various sizes, depending on the panel cutout. Available in 6V, 12V, or 24V AC/DC; there are also optional snap on transformers and a DC-DC converter to support higher voltages.
|
|
|
The AP series of pilot lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cutout diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside the panel. Termination is via solder terminals of various sizes, depending on the panel cutout. Available in 6V, 12V, or 24V AC/DC; there are also optional snap on transformers and a DC-DC converter to support higher voltages.
|
|
|
IMO's range of 22.5mm control pushbuttons and indicatorsare available with Plastic, Metal or Chrome bezels and are supplied in modular form to allow total flexibility. The Cam switch range offering sw.
|
|
Features/Benefits:
- Sealed against solder & cleaning processes
- Thru-hole and surface mount models
- Snap-fitting actuator accepts standard caps
- Tape & reel packaging available
- RoHS compliant models available
|
|
|
Label plates for all standard control gear and signal lamp labelling. Choose from a selection of different materials designed to meet your needs. From stickers to inscribed plastic plates. A universal system is used independent of manufacturers. The available label plates can be used on multiple all push-buttons and signal lamps products from different manufacturers. You can make your selection using an easy comparative list.
|
|
Pushbutton Switches
This range consists of 16 and 22mm models with momentary or ON/OFF operation. They are available in various colours and shapes (round, square, etc.) and in lighted or non-lighted versions.
Key-Type Selector Switches
Also available in 16 and 22mm models, the switches in this range provide switch control using a key.
Knob-Type Selector Switches
These 16 or 22mm switches can be controlled by turning the knob. They come with momentary or ON/OFF operation.
Indicators
The indicators in this range come in 16 or 22mm versions and in various shapes and colours.
|
|
|
Complete line of 16 or 22 mm pushbuttons, selector switches, e-stops and pilot lights all assembled at the Omron factory in St. Charles, IL. These reliable and oil-tight switches are offered in a wide range of shapes and colors.
|
|
|
From 16mm to 30mm and in between, Rockwell Automation offers the broadest suite of products in the world. No matter what your push button needs are, Rockwell Automation can fill them. Allen-Bradley is well known for being a quality leader in push buttons, offering great flexibility, safety leadership, low cost of ownership, superior switching technologies, control network integration, fast delivery, and world-class support.
|
|
P3
Dimension-
19 X 13 X 23(mm)
Certificate-
UL, cUL, ENEC14
Typical Application-
Vacuum, Espresso Machine,
Home Appliances
|
|
|
|
|
|
AB (sub-mini)
Washable Subminiature Pushbutton Switches BB (sub-mini)
Process Sealed Anti-Static Push Button Switches
EB (miniature)
3 Amp Miniature Pushbutton Switches FB (sub-mini)
Super-Subminiature Push Button Switches
G3B (ultra-mini)
Ultra-Thin Pushbutton Switches GB (ultra-mini)
Through-Hole Mount Push Button Switches
GB2 (ultra-mini)
Ultra-Thin Pushbutton Switches HB (sub-mini)
Nonilluminated Push Button Switches
JP (standard)
High In-rush Rated Pushbutton Switches KB (miniature)
Nonilluminated Push Button Switches
LB (standard)
Nonilluminated Pushbutton Switches LP01 (miniature)
Short Body Push Button Switches
M2B (miniature)
Washable Pushbutton Switches MB2000 (miniature)
Miniature Push Button Switches
MB2400 (miniature)
Snap-Action Pushbutton Switches SB4011 (miniature)
3 Amp Momentary Pushbutton Switches
SCB (standard)
Snap Switch Push Button Switches UB (miniature)
Single Element Pushbutton Switches
UB2 (miniature)
Multi-Element Push Button Switches WB (standard)
WB Pushbutton Switches
YB (miniature)
Bushing & Snap-in Push Button Switches
|
|
|
|
|
|
Features:
* Button sealed with patented “rolling sleeve” principle
* Contact area sealed at button and terminals.
* Less than 25 milliohms contact resistance.
* Ideal for low level switching as well as 10 amp. duty.
* Positive tactile feedback.
* Variety of mounting styles.
* Trip point repeatable within .001".
* Engraved buttons and bezels available.
* UL recognized.
* Watertight: IP68 available.
Mechanical life beyond the 50,000 cycles required of MIL-S-8805; up to one million cycles for special designs with reduced operating force. Makes and breaks every time! Less than 25 milliohms contact resistance because the OTTO design features inherent rocking-action that breaks welds and wipes contacts clean.
The OTTO P1 series pushbutton switch offers vastly improved life under extreme conditions found in most military environments. Moistureproofing is accomplished in two ways. The pushbutton is sealed with a silicone boot operating on our patented “rolling sleeve”, providing longer life and smoother operation over a wide temperature range. Epoxy seals protect the contacts and terminals from hostile environments and solder flux.
Watertight sealing (submergible) to 1 meter (IP68) water pressure is available but not as a military approved version as there are no Military specifications. This watertight design is also available in commercial construction as the P3 series. Add “W” to your part number.
|
|
From miniature pilot lights and switches that mount into 8mm panel cut outs through full size industrial switches that mount into 30mm cutouts, we have a switch or indicator for almost any application. Terminations include solder / quick connect terminals, screw terminals, or PC board pins for direct board mounting. Miniature models use snap action gold plated contacts for superior low level switching, whereas larger models use slow-make, double break contacts for switching heavier loads, up to 10A. Many models offer the flexibility of modular construction, which allows you to change contacts, lamp voltages or button colors easily.
|
|
Chromium plated metal bezel pushbuttons, switches and pilot lights, Ø 22 mm.
Description
An offer unrivalled in content
Pushbuttons, spring return
Multiple-headed pushbuttons, spring return
Emergency Stop or Emergency switching off mushroom head pushbuttons, Ø 30, 40, 60 mm
Selector switches and key switches
Pilot lights (LED, incandescent and neon lights)
Combined functions : contact + signalling
Complete products or sub assemblies for user assembly
Connection: screw clamp terminals, plug-in connector, Faston connectors, spring clamp terminals.
Robustness and safety
Certified and approved for meeting the requirements throughout all the continents: EN/IEC, UL, CSA, CCC, Gost, JIS, NEMA…
CE marking
Up to IP 66, IP69K
Low-load electrical contact and high power
Shakeproof connection screws (periodic re-tightening unecessary)
Simplicity and speed of installation
Only one installer required
Fixing by a single locking screw (anti-rotation)
Common accessories
|
|
|
Yaskawa's Bestact™ oil-tight and waterproof 3 amp reed push-buttons offer industry-standard 30 mm diameter operators with a NEMA 4/13 enclosure rating. They are ideal for gaseous Class I, Division 2 hazardous locations where explosion-proof enclosures are not needed. These push-buttons are UL Listed and CSA Certified and have pilot duty inductive switch ratings of C300 (180VA) and Q150 (69VA). NEMA size 4 or larger contactors can be energized directly. Available operators are flush, half-shroud, full shroud, mushroom head, 2 position knob, and cylinder lock. Up to four contacts per operator can be used.
|
|
|
|
|
|
This series with the largest actuator and lowest behind-panel depth within the APEM switch range perfectly complements the APEM product portfolio. The LPI has been developed on a modular base to fit the exact needs of technicians and end-users: more than 300,000 combinations are possible in this way!
For technicians, this pushbutton is available in 2 output versions, for front or rear mounting: a 5A combined separated NO/NC version and a 0.5A NO version. The low behind-panel depth allows installation in environments where space is critical.
For end-users, many different actuator types are available: with raised crimped, screen printed or raised moulded symbol. The large actuator surface allows a visible marking and a big symbol height. Dot or ring LED illumination is also available.
Because of its large actuator, this series is ideal for all applications where the pushbutton needs to be located quickly. Complying with the requirements of the EN81-70 standard (from Disability Discrimination Act), it allows disabled persons to access lifts and buildings more easily.
Features:
• Large ergonomic actuator (dia. 35 mm)
• Tactile feedback
• Low behind-panel depth (21mm max.)
• Stylish design
• Long Life (5,000,000 cycles for 0,5A version)
Applications:
• Where the pushbutton needs to be located quickly (access control, call information, museum, exhibitions…)
• Everywhere space is critical
• Where the end-user uses gloves
|
|
Vandalism-proof actuators
These attractive actuators are made of a zinc-die casting (square)
or aluminium (round). They are IP65. A small, thick plastic lens in the
middle of the push-cap can be illuminated.
|
|
|
|
|
|
New sealed pushbuttons with dia. 16 mm bushing
IR series
APEM has expanded the “I” range of sealed miniature pushbuttons with the introduction of a new dia. 16 mm pushbutton series. The IR series of sealed momentary pushbutton switches is divided into 2 families: standard models and micro-switch technology models.
The standard models include numerous terminal options: solder, flying lead, straight PC, quick-connect, but also screw. The screw terminal version, unique on the market for this type of product, withstands up to 4 amps. Moreover, the behind-panel depth of the flying lead version is the shortest on the market.
The microswitch models are available with 2 electrical functions: NO+NC (3 terminals) and NO/NC combined (4 terminals) withstanding up to 5 amps. APEM is the sole manufacturer on the market offering an illumination option with a wide choice of colours on this type of switch.
APEM’s new IR series can be easily customized. Among the possibilities, round flat actuators can be marked. Also, the LED resistor can be integrated on flying lead versions.
|
|
The Series 49-59 is a range of momentary action, IP67 rated, pushbutton switches. The range consistes of both fully-sealed and panel sealed versions.
The flying lead version of the switch fits neatly into a 8mm thick (max) panel.
Held in position by a snap-fit retaining mechanism, the microswitch version has a maximum current rating of 10A and the advantage of SPDT-DB contacts to cover all circuit requirements.
The Series is available with a choice of round or square bezels and with or without status illumination. The body and button are manufactured from hard-wearing PBT.
Temperature range of upto +105 degrees C.
|
|
OLED SmartSwitch and SmartDisplay are programmable modules that display graphics for alphanumeric characters, animated sequences, and video in 16 bit 65,536 colors.
The OLED technology allows us to provide a 180 degree viewing angle with high contrast and clarity, with wide temperature ranges of -20 to +70 deg C.
The modules are Epoxy Sealed with Straight PC Terminals to prevent entry of solder flux and other contaminants. Standoffs are utilized to allow for easy, secure mounting and alignment. The OLED SmartSwitch has a life of 1,000,000 actuations.
|
|
The AV series: an exceptional choice of industrial metal pushbutton switches offered by APEM
- Diameter 16, 19, 22 or 24 mm threaded bushing
- For panel mounting
- Momentary or latching
- Models with tactile feedback
- Actuator diameters from 12 to 30 mm, suitable for a large variety of equipment
- Several illumination options: illuminated ring, disk or central dot
- Wide range of materials: stainless steel, chrome plated brass, nickel plated brass, varnished polished brass
- Marking option
Include a range of very robust stainless steel vandal-proof pushbuttons featuring IK08 to IK10 impact resistance.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks.
|
|
• Ratings up to 16A, 250V ac
• Stainless steel construction
• Single and double pole
• Latching and momentary operation
• Front panel sealing to IP66
• Wide choice of terminals
• RoHS compliant
|
|
Manufactured from Stainless Steel, Bulgin’s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile environments such as access control applications.
The front and rear panel mounted versions have three profiles – prominent, domed and low profile – with a choice of switching and IP66 & 68 front panel sealing that, combined together, meet the ergonomic, electrical and environmental demands of switch panel design. And where the ultimate strength of steel is not needed, there is a brass, chrome plated alternative. The low profile style switches are now also available with a latching, push on - push off, action.
The illuminated versions, available in dot and ring indication and a variety of illumination colours, are new to the range and will add that extra dimension to control panel layouts.
Other switch types include conventional push-button and toggle switches.
|
|
The EVERSWITCH range of Illuminated and non Illuminated Piezo switches is vandal proof , IP68 weather proof, operating at a wide temperature range
-40ºc to + 125ºc and tested to 50,000,000 cycles. Standard, off the shelf products are available as well as custom switches in any shape and size , triangle, rectangle and large size over 40mm in diameter.
|
|
Featuring a stainless steel body, these 16mm and 19mm R.series pushbuttons are protected to IP65 for use outside or within aggressive environments. They offer a mechanical service life of 1,000,000 operations within an operating temperature of -20°C to +55°C.
The 19mm versions are available with LED illumination, either an attractive ‘halo’ ring or central dot. The halo effect creates a contemporary look that is also an effective way to focus the user’s attention on a primary function.
Red, green, yellow, orange, blue and white LEDs are offered as standard.
The R.series pushbutton features a round actuator with a momentary switching action. It mounts flush to the panel and connects with soldering / plug-in or screw terminals.
Typical applications include access control, ticketing machines, automats, vending machines and kiosks alongside industrial machinery and factory equipment.
|
|
|
|
Switches: Push-button switches, Control devices
