|
|
SPECIFICATION:
- Color: Cool White / Warm White
- Luminescence Angle: 180 Degree
- Lumens: 180 LM
- Power Consumption: 3W
- LED pieces: 3
- Working Voltage: 110 / 220 VAC
- Lamp Base: E14 (E27 available)
- CRI: Ra > 85
- Design Life: > 50,000 hours
- Warranty: 2 years
- Light Degradation < 5% in 30,000 hours
PACKING DETAIL:
- E14-03 (Carton Size:320*320*350 mm )
- 75 Pcs / NW 6.5 Kg / GW 7.5 Kg
|
|
Key Properties
Model No. RP-BU-H01-6WXXE2
Wattage:6W
Beam Angle:180
Socket: E27
Voltage:110V/230V
Lumen: 400lm
Color Temperature: 6000K/3000K
|
|
1W, 2W, 3W, 5W choices
Cold white and warm white
Base: E27, E26, JDR+E14
AC12, AC220V, AC110V
Maximum brightness: 150LM, 600Lux
Beam angle: 38 degrees
CE, RoHS
|
|
Wattage: 6W
100 to 240V AC
Base: E27, E26, E17, E14, B22
250LMA30LUX
CE, RoHs certificate
|
|
MAIN FEATURES
- High Luminous Output: > 35 lumens
(Most competitions: 20 to 25 lumens)
- High Efficiency: 96% (max)
(Most competitions: 60 to 70%)
- Deep Battery Usage: 2 > similar products
- Long Lasting: > 10 years
- Low Cost
APPLICATION
- Drop-in replacement for incandescent bulbs in
- 3 cell and lantern flash lights
|
|
The LED Lighting Strips for single or multi-colour illumination use XLamp LEDs from pioneering American LED manufacturer Cree Lighting to give industry-leading brightness and efficiency. Applications include AWP glass illumination, compact fluorescent replacement, RGB colour backlights, top box illumination, coin mechanism illumination... The list is endless!.
The range is extensive from simple chains of single LEDs mounted on metal or FR4 circuit boards to complex multi-LED arrays complete with drive electronics.
|
|
LD SERIES (Lighting: led light)
Description:
* Easy to wire and install
* Direct interchangeability with MR16 sized and GU5,3 jointed halogen lamps
* Low absorption and consequent energy saving (approximatively 80% in comparison to halogen lighting)
* Low heat output in the cabin
* Aluminium fiffed body: effective cooling to guarantee a long life (estimated 50.000 hours)
* Low maintenance cost in comparison with a similar halogen lamp.
* Excellent luminous flux
|
|
|
|
|
|
Features
. Fixed or Adjustable Intensity
Built-in Current Limiting Resistor for Direct 120VAC Applications (Other Voltages Optional)
Choice of Narrow (12), Standard (30), Medium (50) or Wide Angle (120) Illumination
Stability of LED Wavelength Eliminates Costly Filters
LED Operating Life: 100,000+ Hours (10+ Years)
Monochromatic, Narrow Bandwidth Light Gives More Open Time Before Fogging Film
Very Low Power Consumption
Solid-State, High Shock / Vibration Resistant
Direct Mount in Industry Standard Sockets Without Modification
3-Year Lamp Warranty
Applications
Light-Sensitive Film or Paper Manufacturing Plants
Darkroom Illumination
Control Panel Lighting in Darkrooms
Photo Processing Labs
Darkroom Safelight Spotlights & Task lights
Safelight Hallway Path lights
All specifications subject to change without notice.
Options: For qualified applications and large quantity orders
- Not all possible combinations of voltage, intensity, and angle are available.
- Intensity shown is for narrow angle. Intensity is reduced 12 to 15 times when using extra-wide angles.
- Designed to work in negative ground vehicles.
|
|
|
|
|
|
VCC's LPC Series 4mm Litepipe is designed for use with both vertical and horizontal surface mount LEDs where the Litepipe is attached directly to the display panel. Combining the physical attachment advantage with the fact that the Litepipe is available in eighty-one lengths, the designer now has complete freedom in the positioning of the circuit board within the chassis. These features allow for easy board insertion in final assembly or removal for inspection and repair.
The display lens design of the Litepipe is low-profile with Fresnel rings. The Litepipe lens will disperse the light up to 160. The light receiving end of the Litepipe has a concave surface designed to be positioned in front of the horizontal surface mounted LED or directly over the top of the vertical surface mounted LED. This concave surface maximizes the gathering of the LED light output, increasing the efficiency of the Litepipe display. The Litepipe mixes and blends the LED multi-colors into a single color as the light passes through the uniquely designed Litepipe surfaces.
|
|
Features
- WIDE VIEWING ANGLE.
- DESIGNED TO REPLACE RECTANGULAR
- RIGHT ANGLE THROUGH HOLE DEVICE.
- HIGH TRANSMISSIVITY PLOYCARBONATE MATERIAL.
- UL94V-0 COMPLIANCE.
- RoHS COMPLIANT.
|
|
|
|
|
|
Sunnex LS is an efficient and powerful 3W Power LED light with the light efficiency identical to a 20W halogen light source.
The energy consumption is around 85% lower than halogen, and service life for this LED light is more than 25 times longer (approx. >50,000 hours).
All in all, this makes LS a very interesting and economical solution as a workplace light. Additionally, the LS light leads the way in being an environment and climate friendly light source.
The timeless design makes this lighting suitable from office desks to harsh environments within the industry.
The Sunnex LS light comes as standard with 12-24V low voltage or 230V with a built-in transformer. The LS is equipped with a 250, 500 or 700 mm flexible arm, and also available as a spotlight version. In addition to standard models, custom solutions can be offered.
Examples of application areas for Sunnex LS include the marine and off-shore, military and defence industries, tools and engineering machines, assembly and precision work, as well as any workplace where lighting must be both economical and environmentally-friendly.
|
|
The Imaging Source - a multi-national manufacturer of industrial cameras - has just announced a new series of cost effective LED lighting modules, which seamlessly integrate with The Imaging Source USB, FireWire and GigE camera.
+ Very bright LEDs
+ Direct connection to the camera
+ All parameters can be set via the shipped software, IC Capture and IC Imaging Control or by custom built software
+ Compatible with The Imaging Source USB CCD cameras
+ Compatible with The Imaging Source FireWire cameras
+ Compatible with The Imaging Source GigE cameras
All cameras manufactured by The Imaging Source ship with IC Capture and IC Imaging Control. The former is an end-user application, with which it is possible to set all cameras parameters, save singular images and image sequences and display live video streams. IC Imaging Control is an SDK, which consists of a .NET component, ActiveX control and C++ class library for Windows XP and Windows Vista.
|
|
General Information
Surface mount LED display luminaire with single colour output
Cool White (CW), Natural White (NW), Warm White (WW), Red (R), Green (G), Blue (B) and Amber (A) LED colour options
5 Focused (5), 15 Spot (15), 25 Medium (25), 45 Wide (45) beam options
Suitable for interior and exterior applications
Anodised aluminium body and bezel
Driver ordered separately
Specification
Brand: Axent
Dimensions (mm): Dia = 124, W = 153, D = 18, H = 100
Weight (KG): 1.53
ANA Number: tba
No. of Lamps: 12
Lamp Wattage (W): 1
Lamp Length/Type: LED
IP Rating: IP68
F Marked: Yes
Vandal Resistant: Yes
Cable Entry: Rear
Circuit Type: LED Driver
|
|
High-illuminance LEDs are deployed at high density to produce 360 shadow-free illumination.
This standard range type of LED lighting can be used for a wide range of applications. The different sizes give you the ability to select the model that best matches our lenses. All the direct ring lights are available at red, green, blue, and white wavelengths.
|
|
|
COBRA Linescan Illumination has been designed from the chip up for the extreme requirements of high-speed linescan and web inspection. The LED-based COBRA lines now outperform, halogen and fluorescent line illumination, while offering all of the many advantages of LEDs long lifetime, controllability, and increased reliability.
|
|
Features:
Major Energy Savings. Night Vision Friendly
Solid-State, High Shock / Vibration Resistant
Conforms to IESNA Standards
Long Life LEDs last for 100,000 Hours; White LEDs, 50,000 plus Hours
Mounts on Industry Standard Lamp Posts
Weighs only 18.65lbs. as Compared to (39-42lbs)
Power Factor 0.7. Power Factor Corrected Available
Options Available for Flush Ceiling Mount or Wall Mount**
Very Low Power Consumption, Super Intensity
Reduces Light Pollution
Other Voltages Available: 12Vdc, 24Vdc, 120VAC**
Other Colors Available: Cool White, Amber, Yellow, Red, Green, Blue, Infrareds, Ultraviolet**
5 Year Warranty
|
|
Optex-FA has cost effective and extremely bright LED lighting for machine vision OPB series and other various LED lighting.
Bar light, Ring light, Dome light, Co-axial light, RGB full color light, etc.
We also develop special LED lighting depends on customer request.
Please check catalogs that are uploaded in directindustry web sites.
|
|
Moritex LEDs are tested and grouped into over 100 luminance levels. The LEDs that go into our units are always from the same group ensuring even light output even in larger units.
Before leaving the factory all units are tuned to the same standard performace ensuring consistancy between units.
|
|
|
HAMAMATSU offers a full line of LED with various structures and package shapes ideal for optical switch design.
|
|
TAOS Inc’s Light-to-Voltage (LTV) solutions combine a photodiode and transimpedance amplifier on a single monolithic IC. The LTV family provides a linear analog voltage output that is proportional to light intensity which is normally fed to an ADC for digital processing. This output can be connected directly to an ADC for digital processing, a comparator for thresholding or other analog circuitry for filtering or further processing.
The devices cover a wide range of speed and responsivity options across different spectral responses to span a variety of applications to measure ambient light, light absorption or reflection, and as an infrared data receiver in light controls, printers, light curtains or remote controllers. A summation CHART is avaialble fo
|
|
Discrete LED's / White
Description: White LED , Available in 3mm and 5mm, see individual datasheets for more detailed information on each product.
|
|
|
Light emitting diodes (LEDs) are opto-semiconductors that convert electric energy into light energy. Compared to laser diodes (LDs), LEDs offer advantages such as lower cost and longer service life. HAMAMATSU provides high output power LED ideal for optical switches, encoders, surveying and optical communication.
|
|
Features
- LOW POWER CONSUMPTION.
- SUITABLE FOR AUDIO PANEL INDICATOR.
- FIT 2mm HOLE IN PANELS.
- LONG LIFE-SOLID STATE RELIABILITY.
- RoHS COMPLIANT.
Description
The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode.
|
|
|
LUXEON Rebel white LEDs enable endless lighting possibilities that are more efficient and reliable, longer lasting and reduce CO2 emissions. With a portfolio of emitters that allow you to design lighting for shops, offices, outdoor areas, hotels and homes, LUXEON Rebel is transforming the way we live, shop and play.
|
|
Item Number: BB-B06-03
Base : E27, which can replace ordinary incandescent directly.
Size: 55mm (H) * 50mm (Dia.)
LED (Qty * Wattage) : 1 * 3 W
Power Consumption: 3W
Voltage: AC100 C 240V
LED Brand: SSC / BridgeLux / Cree, or on Request
Full Range of Colors: warm white / white / cool white / red / yellow / blue /green
Luminous Flux: 90-120LM
Dimmable : on request, different price
Beam Angle: 30 / 40(glass lens, optical grade)
Material: Aluminum
Heat Spreading: Excellent thermal cooling design with internal copper heat conductor and external aluminum housing
Brightness Attenuation: only 3% - 5% after 1,000 hours
Life Time: 50,000 hrs
No UV or IR radiation
Body temperature: 48
Working Temperature: -40 ~ 70
|
|
APPLICATIONS:
- Direct replacement of traditional halogen bulbs
- Illumination and decoration at home and public areas
- Suitable for hotel, bar,meeting room,groggery, shop,telephone booth etc
FEATURES:
1) 1*5W High power LEDs as the light source;
2High quality aluminium alloy heat dissipation design to enlarge the heat dissipation area to the maximum;
3) Using the wide pressure constant-current power supply design for the driven power supply, adaptable to 100-240/AC;
4) Unique bulb appearance with modern streamline design;
5) E27, MR16, GU10 choice;
6) Control Mode :IR Remote control(power on and of control);
7) Feature: many pcs synchronous change-color;
8) Long Term Lumen Maintainance & Long Lifespan.
|
|
Character
1. Socket:E27/MR16/GU10
2. Multi-color(16 colors)
3. IR Remote control/ Master Slave configuration
4. Input voltage:100~240VAC 10~15VAC/DC
5. Total power:4.5W
6. Lifetime:50,000hours
|
|
|
|
|
|
Following its acquisition of the US based LEDCO division of Wilbrecht Electronics, Inc., Microprecision is introducing the popular series of chrome panel mount indicator lights to the European market. Made with a tough reflective, nickel-plated brass housing for 3mm and 5mm LEDs, the indicator lights are ideal for control panels, instrumentation and front panel fault indicators that are exposed to harsh environmental conditions. Equipped with a nitrile gasket/washer and sealed to IP66, the chrome LEDs are suitable for water-tight and high vibration applications.
The rugged panel mount LEDs are available with daylight readable single colours, bicolour, tricolour, and blinking. The products are available with bare pins or wire leads which can be customized with a wide selection of connectors for fast installation in your application. Options include internal resistors for 5-60VDC and 120VAC, black matte housing finish, custom lead lengths and wire types, including avionics grade solution.
For more information please visit our news section on www.microprecision.ch .
|
|
|
|
|
|
APPLICATION - CLIPMOUNT permits the panel display of a PCB mounted LED without its physical attachment to the front panel. This mount enables the use of interconnects between display panels and circuit boards.
VERSATILITY - CLIPMOUNT provides a method of displaying PCB or panel mounted LEDs on a display panel. These mounts are available in either black or clear allowing an LED viewing angle of up to 180 degrees. Mounts are available for both 3mm and 5mm LEDs.
BRIGHTNESS - CLIPMOUNT provides direct viewing of the LED. Mono and multicolor LEDs as well as infrared and photo-detection devices can be mounted in this manner. This design also permits use of either diffused or nondiffused LEDs.
INSTALLATION - CLIPMOUNT are easily installed for PCB mounted LEDs. Simply slide mount thru a 9/32" panel hole and press retaining ring into place. The LED is now able to slide in and out of mount without its physical attachment to front panel. For interconnect applications, hold mount tightly to panel with a nut driver and press connector with LED on from rear.
SPECIFICATIONS
MATERIAL: Mount - Polycarbonate (black - clear) Ring - Polypropylene (black) (U.L. Listed Materials)
|
|
3mm Chrome Panel Mount
5mm Chrome Panel Mount
3mm Chrome Panel Mount Recessed
5mm Chrome Panel Mount Recessed
Press-Fit 3mm Panel Mount
Press-Fit 5mm Panel Mount
|
|
|
|
LEDs, Photodiodes, Laser diodes
