|
|
| Products 91 to 120 of 223 |
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
SMT LEDs
A comprehensive range of surface mount LEDs is also available in 0603, 0805, 1204, 1206, PLCC-2 and PLCC-4 versions.
The complete visible spectrum of colours can be supplied, as well as bi-colour and tri-colour versions.
Applications include background illumination, backlighting, status indication, audio equipment and automotive dashboard displays.
|
|
Features
• Fixed LED in metal-threaded shaft base with removable transparent lens cap
• Replaces the ET-5 and ET-6 incandescent high voltage panel indicators found in control rooms of power plants, sub-stations, and utilities
• Integrated series resistor prevents short circuiting, special fuses are unnecessary
• Can be front mounted or rear mounted to the panel; both nuts & washers can be removed or adjusted — accommodates panels up to 2.2 inches in thickness
• Faster on/off time than incandescent lamps
• LED life of 100,000 hours
• Shock and vibration resistant
• Much lower power consumption, lower energy costs
• No cold filament inrush current
• Only one 21/32 inch hole (0.66", 16.8mm) is required for panel mounting
• 12 inch leads for screw or soldered connections
Options (For large quantities and qualified applications)
• Optional AC voltages: 67Vac, 115Vac, 230Vac
• Optional clear lens cap over color LED
|
|
|
These high-speed photodetectors were designed to offer the ideal combination of high-speed performance (up to 25 GHz) and optical-input flexibility. They show flat response in both amplitude and phase up to 25 GHz and are optimized for frequency-domain applications.
|
|
Description
FC series detectors are made through coupling InGaAs PIN photodiodes with FC connection using lenses. FC series detectors have high response within 1.0～1.65µm and the whole response spectral be extend to 0.65～1.65µm due to the optimized diode structure. Internal optical attenuator is used for measure higher optical power. The maximum of detectable optical power can get to 25dBm and 30dBm, respectively.
FC series are mostly applied for optical measurement. User can select appropriate units according to needed wavelength and linear range.
Features
* High Response within 1.0～1.65µm
* Low Dark Current
* Planar Structure
* Broad Spectral Response Range (0.65～1.65µm)
* Broad Dynamic Range
* High Reliability
* FC Connection, Firm Coaxial Package
Applications
* Optical Measurement
* Optical Detection
* Online Measuring of Optical Fiber Cable
* Output Test for Optical Amplifier
* Data Transmission
|
|
RMT offers coordinated pairs (solid state light emitter and photodetector) suitable for application in non-dispersive infra-red (NDIR) gas analyzers and optical sensors.
The pairs consist of high effective photodetector and special solid state pulsed light emitter.
The spectral responses of the photodetector and light emitter are coordinated for effective operation at absorption lines of measuring gases.
Additional built-in narrow band filters integrated onto photodetector (or/and light emitter) provide high selectivity of measuring schemes.
Standard options of the optopairs are suitable for analyzing of CO2 (carbon dioxide), CH4 (methane), hydrocarbons mixtures.
|
|
|
|
|
|
|
HAMAMATSU realized MSM (Metal-Semiconductor-Metal) photodetector having ultrafast response. The GaAs MSM Photodetector G4176 features 30 ps response time for both rise and fall while keeping a low dark current (100 pA at Ta-25 °C). The rise time of the InGaAs MSM Photodetector G7096 is 40ps. Symmetrical and interdigital Schottky contacts are fabricated at the sensitive area, whose size can be larger than other kinds of fast response photodetectors. This makes easier to set up with optics. Therefore, MSM photodetectors are suited for measurements of optical high-speed waveform and optical communications. There is no electrical polarity in MSM photodetectirs, that is, both polarities of a bias voltage are available, and the polarity of an output signal depends on its connection. Two kinds of packages are prepared for each MSM photodetector. The package of G4176 & G7096 is a coaxial metal type (patent : Japan 2070802), which is easy to connect with an electrical SMA-connector. That of G4176-01 & G7096-01 is a TO-18, which is very common. An optical fiber or connector input types are available as a custom option. Contact your local representative for more information.
|
|
Various packages available:
- SFH 5110: IR remote control receiver (30, 33, 36, 38, 40kHz)
- SFH 5140 F: Schmitt-Trigger IC in Miniature Sidelooker Package with Lens
- SFH 5410: IR remote control receiver (36 and 38kHz)
- SFH 5440: Schmitt-Trigger IC in Smart DIL Package
- SFH 5840: Schmitt-Trigger IC in TO-18 Package with Glass Lens
- SFH 5711: High accuracy Ambient Light Sensor in SMT Chipled
|
|
|
Toshiba photosensors and photointerrupters are widely used in the market today. The advanced Toshiba packaging technology allows the company to introduce compact devices, which are popular in the consumer electronics product market. Toshiba is among the pioneers in introducing illuminance sensors (a.k.a. ambient light sensors). These light sensors are now used in many mobile devices such as cell phones and other consumer electronic products.
|
|
|
|
|
|
The TSL2561 is a light-to-digital converter that transform light intensity to a digital signal output capable of direct I2C (TSL2561) interface. Each device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range (16-bit resolution). Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2561 device supports a traditional level style interrupt that remains asserted until the firmware clears it.
* Approximates Human Eye Response
* Programmable Interrupt Function with User-Defined Upper and Lower Threshold Settings
* 16-Bit Digital Output with I2C Fast-Mode at 400 kHz
* Programmable Analog Gain and Integration Time Supporting 1,000,000-to-1 Dynamic Range
* Automatically Rejects 50/60-Hz Lighting Ripple
* Low Active Power (0.75 mW Typical) with Power Down Mode
* RoHS Compliant
|
|
|
TAOS Inc’s Light - to- Digital Converters combine a broadband photodiode (350 nm to 1100 nm) with a visible light blocking photodiode in a single CMOS integrated circuit. With integrated analog-to-digital conversion circuitry, data is output via a serial interface using two standard protocols: SMBus and I2C.
|
|
|
The LTF sensor performs the functions of light sensing, signal conditioning, and A/D conversion in a single monolithic IC. The LTF device converts light intensity to a digital format for a direct interface to a microcontroller. The output of this device is a square wave or pulse train whose frequency is linearly proportional to light intensity and features a dynamic range of 120dB.
|
|
|
|
|
|
The TSL237 light-to-frequency converter combines a silicon photodiode and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity. Because it is TTL compatible, the output allows direct interface to a microcontroller or other logic circuitry. The TSL237 has been temperature compensated for the ultraviolet-to-visible range of 320 nm to 700 nm and responds over the light range of 320 nm to 1050 nm. The device is characterized for operation over the temperature range of -25 degrees C to 70 degrees C and supplied in a 3-lead clear plastic side-looker package with an integral lens
* High-Resolution Conversion of Light Intensity to Frequency With No External Components
* Communicates Directly With a Microcontroller
* High Irradiance Responsivity (2.3 kHz/(uW/cm²) at 524 nm)
* Low Dark Frequency (<2 Hz at 50° C)
* Single-Supply Operation (2.7V to 5.5V)
* Stable 200 ppm/°C Temperature Coefficient
* RoHS Compliant (-LF Package Only)
|
|
Detection Technology offers two series of high-quality photodiodes for various measurement purposes. Detection Technology's ultra-clean processing method provides excellent performance characteristics and high reliablity. The use of unique guard-ring concept offers impressive performance improvements.
Photodiodes in PDA series are optimized for applications requiring ultimate leakage current performance at unbiased operations. In the visible and NIR-region excellent light response can be used by using PDA series photodiodes.
PDC series photodiodes are extra high-resistivity PIN photodiodes with an excellent spectral response at 550 nm. This is achieved by using ultra pure starting material, special high-purity manufacturing process, and optimized optical filtering. PDC-series photodiodes also incorporate a unique guard-ring structure, which greatly reduces leakage current in biased operation.
|
|
Features :
- Integrated TIA (Trans Impedance Amplifier)
- High gain and high sensitivity
- MSA compliant XMD (10 Gbit/s Miniature Device)
Applications:
- OC-192 and STM-64 (10Gbit/s) transmission systems
- Long haul and Metropolitan DWDM systems
- Small form Transponders and Transceivers
|
|
Photodiodes
PerkinElmer utilizes Silicon and InGaAs materials for their photodiodes to provide detection from 220 nm to 1700nm. These devices are offered in a variety of sizes to meet customer sensitivity and speed requirements. Additional pre-amplifier and filter options are available to tailor the device to meet specific requirements.
Avalanche photodiodes provide higher sensitivity than standard photodiodes. They are ideal for extreme low-level detection and photon counting. Offered in Silicon or InGaAs materials, these devices provide detectivity from 400 nm - 1100 nm. Multiple configurations are available to provide a wide range of sensitivity and speed options.
|
|
Detection Technology provides both standard and customized single-row and multi-row photodiode arrays.
The standard ARB photodiode array series is available with 1.5 mm, 1.6mm and 2.5 mm pixel pitches. All the arrays are available both without scintillators or with a scintillator selected from a wide range of alternatives selected based on the required energy levels and performance.
The photodiode geometry can be customized to literally any shape and dimension. Based on the requirements on the characteristics and application environment given by customers, Detection Technology's application specialist team selects from its wide-range photodiode technologies, processing technologies as well as other design parameters to build a tailored solution.
|
|
Photodiode Arrays (PDA) for Scientific Applications
AMI Semiconductor's WS and HS series are two distinct families of linear self scanned photodiode arrays. These photodiode sensors employ AMI Semiconductor's proprietary CMOS image sensing technology to integrate the sensors into a single monolithic chip. They are optimally designed for applications in spectroscopy and HPLC.
Features
- 65pC saturation capacity for wide dynamic range
- Wide spectral response (180 – 1000nm) for UV and IR response
- NP junction photodiodes with superior resistance to UV damage
- Low dark current
- Integration time up to nine seconds at room temperature
- Integration time extended to hours by cooling
- High linearity
- Low power dissipation (less than 1mW)
- Geometrical structure for enhanced stability and registration
- Standard 22 lead dual-in-line IC package
|
|
|
Si photodiode arrays consist of multiple photodiode elements, formed in a linear or matrix arrangement in one package. Some arrays are supplied coupled with a CMOS multiplexer. The multiplexer simplifies design and reduces the cost of the output electronic circuit. Our Si photodiode arrays are used in a wide range of applications such as laser beam position detection, color measurement and spectrophotometry.
|
|
General description :
Panasonic PhotoMOSTM relays offer high reliability with stable performance. Fast switching speed, low capacitance and small package size ensure that PhotoMOS relays meet the requirements of high performance switching applications, such as ATE, Instrumentation and Medical equipment.
- Lowest on-resistance available
- SSOP package with CxR=5 and low power consumption
- High power with capacity up to 2.5A, 60V load.
- SON package - smallest relay available.
|
|
FEATURES
1. High-speed switching
Since release time is 0.1 ms, the MOSFET or other load can be turned off
quickly in urgent situations.
2. Space saving
With a built-in control circuit, an external resistor is not needed. This contributes to making substrates more compact.
3. High insulation
DIP type: 5,000 V
SOP type: 2,500 V
SSOP type: 1,500 V
4. Extensive product lineup
Products include the industry’s smallest SSOP type, SOP4 type, and DIP 6 type.
|
|
Panasonic PhotoMOSTM relays offer high reliability with stable performance. Fast switching speed, low capacitance and small package size ensure that PhotoMOS relays meet the requirements of high performance switching applications, such as ATE, Instrumentation and Medical equipment.
- Lowest on-resistance available
- SSOP package with CxR=5 and low power consumption
- High power with capacity up to 2.5A, 60V load.
|
|
|
|
|
|
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
PCB Mounted LED's
J1001X R/Angle PCB LED
Features and Benefits
♦ Solid State Reliability
♦ Mean Time Between Failure 100,000 hours (11½ years)
♦ Board Space Saving
♦ “Fit and Forget” Philosophy
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting
|
|
General Information
Surface mount LED display luminaire with RGB colour change output
RGB colour change LED's
5° Focused (5), 15° Spot (15), 25° Medium (25), 45° Wide (45) beam options
Suitable for interior and exterior applications
Anodised aluminium body and bezel
Driver ordered separately
Specification
Brand: Axent
Dimensions (mm): Dia = 86, W = 107, D = 16, H = 70
Weight (KG): 4.50
ANA Number: tba
No. of Lamps: 36
Lamp Wattage (W): 1
Lamp Length/Type: LED
IP Rating: IP68
F Marked: Yes
Vandal Resistant: Yes
Cable Entry: Rear
Circuit Type: LED Driver
|
|
Forge Europa offers an extensive range of high performance solid state LED lamps available in a variety of different package diameters, colours and profiles.
LED lamps incorporating high performance die ensure that even the most demanding application requirements can be satisfied including traffic signal, variable message sign (VMS), video wall and accent lighting projects
|
|
PIN Silicon Photodiodes
The OP913WSL each consist of a PIN silicon photodiode mounted in a wo-leaded, TO-5 hermetically sealed package. The lensing effect of thr OP013SL allows an acceptance angle of 10 degree measured from the optical axis to the half power point. The flat lens of the OP913WSL has an acceptance half angle of 30 degree. The large active area allows very low light level detection
Features:
- Wide or Narrow receiving angle available
- Large active area (.115" * .115")
- Fast switching time
- Linear response vs irradiance
- Enhance temperature range
|
|
VTP485S - Fast Response, High Dark Resistance Photodiode
Large area planar silicon mounted on a two lead ceramic substrate and coated with a layer of clear epoxy. Low junction capacitance permits fast response time.
|
|
|
|
LEDs, Photodiodes, Laser diodes
