|
|
LT10.7 SERIES 10.7MHz Bulk,LT/LTH SERIES 4.5MHz~6.5MHz Bulk,
LT450/455_W 450KHz, 455KHz Bulk,LT450/455_U 450KHz, 455KHz Bulk LTM450/455_W 450KHz, 455KHz
|
|
JTM & JTC 450 / 455 :
- Two Leads Discriminator in kHz
- For Communication Application
JT10.7 / JTCV10.7 :
- JT 10.7 Two Leads Discriminator
- JTCV10.7 Two pads Discriminator
- For FM
- Color Code of Center Frequency
|
|
Provides brick wall type minimalisation of
spurious low frequency phenomena that may
otherwise invalidate data from piezo-electric
sources. Supposed vibration acceleration signals
may contain thermal and strain induced noise
elements, both constrained to the low frequency
end of the spectrum by reason of thermal mass
and the 1/fo
2 relationship between acceleration vs.
displacement respectively.
The filter of course acts as the boundary fo,
between valid data (>fo) and this type of noise.
|
|
|
Maxim provides a wide range of anti-aliasing and post-DAC filters that improve system performance for frequencies up to 300kHz and complement Maxim's ADC and DAC product lines.
|
|
This FM rejector filter is used to filter out unwanted excessive FM frequencies in your OATS, or other EMC testing facilities.
These frequencies can interfere with your test set-up, spectrum analyzer bandwidth etc.
Caution should be used if your products emissions are in this filter's frequency range as it will reject them as well.
|
|
Spectrum Advanced Specialty Products offers its premium line of SMPS Capacitors to military and commercial power markets. These SMPS caps have a leaded configuration to safeguard the device against thermal and mechanical stress, ensuring the longevity of each cap’s lifetime. With high power and voltage capability of up to 500VDC, SMPS capacitors are ideal for DC-DC power supply applications. With lower ripple voltage and less self-heating, these SMPS caps also have a characteristically low ESR and low ESL when compared to other capacitive elements.
• Custom lead-frame attachments & custom capacitor assemblies available
• High reliability testing, conforming to MIL-PRF-49470
• Operating temperature range of -55C to +125°C
• Capacitance up to 47μF
• Standard sizes: SMP3, SMP4, SMP5
|
|
Multilayer Ceramic Capacitors
Case size: 01005 to 1210
capacitance: 1pF to 100uF
Voltage: 4V to 630V
|
|
Product Name: Ceramics filter
Product Note: Special structure ceramic filters
Adsorption fish flavor
Size depending customers demand.
About Products: The special structure will enlarge the touching area of air flow in maximum, so that it can improve the decomposition efficiency of stinking and odor. With the theory basis of touch-catalysis, this product will decompose harmful and stinking smell including sulfureted hydrogen and amine under low temperature.
This product is mainly adopted for the removing of strange smell in barbecue, also in refrigerator and preventing rotting of foods with strange smell removing and freshness-keeping effect.
Different types are available according to the requirements
|
|
LTM450BW 450LTM455BW 455 2.0 2.0 LTM450CW 450 2.0 KHz
LTM455CW 455 2.0 KHz; LTM450DW 450 1.5 KHz ;LTM455DW 455 1.5 KHz LTM455EW 455 1.5 KHz;LTM450FW 450 1.5 KHz
|
|
Features
• For broadband applications
• Typical 3 dB bandwidth of 5.7 MHz
• High attenuation
• Single-ended operation
• Ceramic Surface Mount Package (SMP)
• Small size
• Replaces Sawtek P/N 851553 (BW 3dB=5.5 MHz)
|
|
ZTA/ZTT SERIES 2.000MHz~40.000MHz
CRB SERIES 190KHz~1250KHz
CRB 456F/503F/480E SERIES 456KHz, 480KHz, 503KHz
ZTACC/CS/CV/MG/MT/MX; ZTTCC/CS/CV/MG/MT/MX 2.000MHz~50.000MHz
LT10.7 SERIES 10.7MHz
|
|
Series :
ZTACC :
Frequency : 1.84MHz to 8.00MHz
ZTACS :
Frequency : 6.00MHz to 13.00MhZ
ZTACV :
Frequency : 8.00MHz to 13.00MHz
ZTACW :
Frequency : 20.00MHz to 25.99MHz
ZTTCC :
Frequency : 1.84MHz to 8.00MHz
ZTTCR :
Frequency : 4.00MHz to 8.00MHz
ZTTCS :
Frequency : 6.00MHz to 13.00MHz
ZTTCV :
Frequency : 8.00MHz to 13.00MHz
ZTTCW :
Frequency : 20.00MHz to 50.00MHz
ZTB Y :
Frequency : ±2KHz
|
|
ZTTCV....MT Series 8.00-13.00 ZTTCV....MX Serie 16.00-50.00
ZTTCC....MG Series 1.84-8.00 ;ZTTCS....MT Series 6.00-13.00 ZTTCS....MX Series 13.01-50.00 ;ZTACV....MX Series 16.00-50.00
ZTACV....MT Serie 8.00-13.00; ZTACS....MX Series 13.01-50.00 ZTACS....MT Series 6.00-13.00 ;ZTACC … MG Series 1.84-8.00
|
|
|
|
|
|
FailSafe(TM) devices provide an optimum solution for applications where continuous operation is required in the event of a primary clock failure. The continuous operation is achieved using a DCXO that serves as a redundant clock source in the event of a reference clock failure by maintaining the last frequency and phase information of the reference clock. The unique FailSafe IP block eliminates sudden output phase changes, aka. 'phase bumps', which usually occur in conventional clock distribution devices as the user switches between two asynchronous reference clock sources.
Field Programmable Zero Delay Buffer is a high-performance clock distribution device that can be customized for a wide range of applications. The device is implemented on Cypress's proprietary non-volatile technology. It is fully programmable via volume or prototype programmers. The device enables the user to define an application-specific clock distribution device with customized input and output dividers, feedback topology (internal/external), output inversions and output drive strengths.
|
|
|
Silicon IC clocks enable applications such as servers, work stations, registered DIMMs, routers, wwitches, storage (RAID, SAN, NAS), set-top boxes, and imaging products like scanners, printers, and digital cameras.
|
|
|
Analog Devices offers ultra-low jitter clock distribution and clock generation products for wireless infrastructure, instrumentation, broadband, ATE and other applications demanding sub picosecond performance. ADI clock products deliver low jitter, low phase noise, and low spurs making them ideal for clocking high performance analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). ADI clock ICs integrate PLL cores, dividers, phase offset, skew adjust, and clock drivers in small chip scale packages.
|
|
Virtually eliminates the problem of conducted EMI in data line applications
Provide common- and differential-mode noise attenuation,Reduce noise by a factor of 32 from 15 MHz to 300 MHz,High current (500 mA) versions available;300 Vrms isolation;Excellent environmental stability and low cost
Available in 10 and 8 line versions;Consider our PDLF series for 4, 3 and 2 line applications;RoHS-compliant. 260°C compatible. Tin-silver-copper over silver-platinum-glass frit terminations.Samples of all values plus samples of PDLF and through-hole versions are available in Coilcraft Designer's Kit D303
|
|
Greenray VCXOs are designed for communications, instrumentation and test equipment applications. Our VCXOs are available in a variety of packages, including SMT and low profile DIP.
Key examples of our VCXO and Clock Oscillator product lines follow. For detailed information, product Data Sheets (pdf file format) are provided. You can also link to our Interactive Product Selector at the bottom of this page. To inquire about custom specifications, call 717-766-0223 and talk to a Greenray engineer.
|
|
Used in FM Broadcast System(2) 106.70MHz~111.10MHz Tube or T&R Used in FM Broadcast System(3) 111.20MHz~115.20MHz Tube or T&R Used in FM Broadcast System(4) 86.50MHz~118.70MHz Tube or T&R
Outline & Dimensions(2) Tube or T&R
New SMD SAW Resonator/Filter 35.00MHz~1575.42MHz
|
|
|
The CX1V quartz crystal is a high-quality tuning fork resonator for use in Pierce (single inverter) oscillators. The CX1V is hermetically sealed in a rugged, miniature ceramic package, one-fourth the size of an eight-pin mini-DIP. The CX1V crystal is manufactured using the STATEK-developed photolithographic process, and was designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications.
|
|
|
The CX1VSM quartz crystal is a high quality tuning fork resonator for use in Pierce (single inverter) oscillators. The CX1VSM is hermetically sealed in a rugged, miniature ceramic package. The CX1VSM crystal is manufactured using the STATEK-developed photolithographic process, and was designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. Maximum process temperature should not exceed 260OC.
|
|
PARAMETER
Frequency Range 13MHz /19.2MHz/26MHz; Supply voltage Vcc 2.4~3.0V
Control voltage 0 Vcc ; Output Waveform Clipped Sine Wave `
Output Level 0.8 Vp-p ; Input Current 1.5 mA Max
Operating Temp. Range-30+75℃ , Storage Temp. Range: -40+85℃
|
|
• Variable optical delay up to 20 cm equivalent air path
• Polarization Maintening
• Compact (rack size)
• Low loss
|
|
Micro-Coax delay lines are a highly reliable method of providing short delays in RF and Microwave systems. We specialize in solving unique coaxial delay line packaging and electrical problems. Our custom delay lines offer an unbeatable combination of high performance, low cost and quick delivery.
Our application engineers will work with you to custom configure a delay line that satisfies your unique electrical and packaging requirements.
|
|
Wide range of filters:
Radio frequency filters (CRFI).
I/O Inverters inductances.
Chockes.
Complete range of sinusoidal filters FCL.
|
|
Capacitors for radio-interference suppression
classes: X1, X2, Y1, Y2
Filters for radio-interference suppression
classes: X1Y2, X2Y2
|
|
|
full custom design, manufacture and testing · complete inductor winding and filter production facilities · 0.1 amp to 500 amps · 1 VDC to 5000 VDC and up to 660 VAC · frequency up to 1000 Hz · military and commercial applications
|
|
|
|
Oscillators, Passive filters
