|
|
Various configurations are available for the Digital Potentiometers. They are very easy to integrate due to their small sizes and easy accessibility.
|
|
IGP Series
Using this potentiometer a maximum angular rotation of 3800° can be converted into a voltage proportional to the angle of rotation, through the medium of a conductive-plastic potentiometer.
This special "heavy-duty" version is designed to measure angular or linear displacement under the most difficult of enviromentat conditions. Simply yet robustly built, these units are suitable for use in all manner of industrial applications and engineering industry.
The cast housing is watertight. The single stage gearing is exceptionally backlash-free. Heavy-duty bearings allow for high axial loading on the shaft; gearwheels or even chain drives may be used directly drive the shaft.
Sealing is achieved through the use of a stepped bush whilst electrical connections are made via plug and socket mounted on the side of the unit.
Special features
- reduction gearing 3:1, 5:1, 10:1
- good linearity 0.1 % (standard)
- long life typically 100 x 106 movements
- mechanical rotation
- robust construction with 10 mm shaft
- Protection class IP 65
|
|
| Recording of the measuring value is absolute via a potentiometer. The measuring range is adapted over an interior transmission. |
|
ELAP offer in terms of linear motion potentiometers includes a variety of mechanical sizes, strokes, resistive values and mounting fittings:
- strokes from 25 to 950 mm
- conductive plastic resistive element
- excellent independent linearity and virtually endless life
- easy mounting and high protection degree against environmental agents |
|
- 50 mm up to 1000 mm
- Outstanding Lineartiy
- Nominal Resistance 5K or 10K
- Resistance material Condutive Plastic
- Very long life 50 million movements
- High Resolution 0,01mm
- Operating Speed 5 m/s
- IP 55 Protection Class |
|
Metal Oxide Varistors are ceramic passive components made of zinc oxide sintered together with other metal oxide additives. They provide an excellent protective device for limiting surge voltages and absorbing energy pulses. Their very good price / performance ratio enables designers to optimize the transient protection function when designing the circuits.
Manufactured according to high level standards of quality and service, our Metal Oxide Varistors are widely used as protective devices in the telecommunications, industrial, automotive and consumer markets.
If you have any specific requirements, please contact your local AVX sales office for details on how AVX MOVs can assist you in addressing your future requirements. www.avx.com
|
|
| REO can build virtually any type of motorised potentiometer, using a range of AC or DC motors. Any number of cam-operated microswitches and a other options such as a slipping clutch for manual override can be provided. There is also a range of control cards available, sutable for use with an analogue set point control signal. |
|
These potentiometers have many technical advantages. They make it possible to provide in a simple and economic way absolute set points.
To 5 potentiometers (of 100 Ohm with 100 kohm 5W) of high-resolution (0,02%) can be gone up on the same case, while remaining very compact.
These apparatuses integrate to 9 cams for the intermediate ends of the road, or other points and exist in version 24V-240V AC or 12-24V cd., with a large variety of cycle time.
|
|
The semiconductive reluctance elemental device (single crystal InSb) of high sensitivity was designed for the noncontact potentiometers.
Excellent characteristics by matching with the magnetic circuitry are exhibited.
There is the following advantage because it is the contact-less structure that a magnet was combined with the reluctance elemental device unlike slide wire potentiometer.
- Long life time because a resistor isn't worn away.
- Low torque because a shaft is held by the ball bearing.
- Mechanical response is excellent and electric response exceeds the mechanical response fully.
The angle detection of ± 50° is possible.
LP05M series is suitable for the high reliability use because a temperature compensation circuit is built in.
THose potentiometer are used for :
- Paper thickness measurement for ATM and OCR.
- String tension or Tape tension controller
- Angle measurement of valve
- Level detection of fluid
- Rotation angle measurement of servomotor
|
|
2-WIRE RTD TRANSMITTER
4-20 mA 2-Wire transmission for RTD Temperature Sensor
Specifications:
Accuracy : }0.1% FS. ( at 23Ž )
Linearity : }0.1% FS.
Sensor Current : < 1 mA
Excitation Supply Voltage : 10 - 30V DC mA Output Current Limit : < 25 mA
Temp. Coefficient : }0.02% / Ž
Installation : Head and Wall Mounting |
|
| Conax Buffalo Technologies offers a complete line of dependable, ruggedized RTDs, ranging from thin film platinum sensors to wire wound sensor configurations available in platinum, nickel and copper. We can provide the RTD configuration to suit your specific needs, from trimmable RTDs, which provide added field installation flexibility, to fast response RTDs, for applications where response time is critical. |
|
Evikon MCI manufactures wide range of sensor assemblies for temperature measurement in gases and air, liquids and on solid surfaces for different applications
ET20x series push-in resistance temperature probes are intended for measuring temperatures in liquids and gases. Applications include heating and cooling installations, building and industrial automations, labs.
- PTC1000 sensor versions up to +150°C
- Pt100 or Pt1000 sensor versions up to 260°C or 500°C
- AISI 316 acid-proof steel stem
- Ø4 or Ø6 mm lenght 50 up to 1000 mm
- PVC (<105°C), FEP (<205°C) or with fiberglass insulation (<400°C) cable
- Adjustable flanges, compression fittings and thermowells
- Individual 4-20 mA transmitter option |
|
- Tip-sensitive (260°C) feature fast-responding copper tip in stainless sheath.
- Mineral insulated (600°C): Stable and rugged for demanding industrial environments.
- High temperature (850°C): Laboratory grade precision in an industrial probe.
- Diameters options include 0.125", 4 mm, 0.188", 0.215", 6 mm, 0.250"
- Single and dual elements
- Wide selection of adjustable fittings, thermowells, and connection heads available from stock
- Cut-to-length option lets you adjust probe length in the field
|
|
Watlow’s platinum resistance elements are specially designed to ensure precise and repeatable temperature versus resistance measurements. The sensors are made with controlled purity platinum wire and high purity ceramic components, and constructed in a unique strain-free manner.
Features
Wide temperature range of -200°C (-328°F) to 650°C (1200°F)
Specialty RTDs available to 850°C (1560°F)
Accurate
Sensitive Standardized
Interchangeable Repeatable
Applications
Air conditioning and refrigeration servicing
Furnace servicing
Foodservice processing
Medical research
Textile production
Plastics processing
Petrochemical processing
Microelectronics
Air, gas and liquid temperature measurement |
|
| The MVX-II Multi-Variable Transmitter is a gas measurement unit built around a patented, silicon-based DPE cell. It combines the accurate and stable measurement of differential pressure, static pressure and temperature with high speed input sampling/averaging and communications capabilities. This low powered, field-hardened gas measurement transmitter features an easy-to-use laptop interface and industry standard communication protocol which makes configuration, measurement, and reporting simple, accurate, and reliable. |
|
Rotary resistors are available for power ratings of up to 500 Watts. Several resistors can be connected in parallel to achieve higher power ratings, if required.
A number of options are available, including motor drives, cam-operated micro-switches, stepped windings and extended drive shafts.
|
|
| A wide range of linear faders and rotary faders for control desk functions in professional broadcasting and studio industries. |
|
Trimming Potentiometers
Trimming potentiometers perform a variety of circuit adjustments in all types of electronic equipment. The variety of physical configurations available and the ability to withstand today's manufacturing environment offers the designer flexibility in selecting the best trimmer for the application. Around the world, trimmers are used in virtually every electronic market.
Multi-turn Trimming Potentiometers
Single-turn Trimming Potentiometers
Military Qualified Trimming Potentiometers
Please read our article on safety issues concerning counterfeit Bourns® Trimmers
|
|
| Murata manufactures a broad range of trimmer potentiometers using both carbon and cermet materials. |
|
| Murata's capacitors, manufactured from our own superior ceramic materials, meet the demands of a wide variety of applications in voltage ratings from under 3V to several thousand volts. Based on our unique design and processing technologies we offer a variety of chip MLCC products from the ultra small 0402 size devices, through high capacitance products designed to replace tantalum and electrolytic dielectrics, low ESL, high frequency and array products. In short Murata has a ceramic capacitor to meet virtually every possible application. We also offer a wide range of trimmer capacitors including ultra small and thin types. |
|
| ... products without technical information |
| |
|
|