|
|
Tipper
Maximum payload : 500 kg in the deck
SPECIFICATIONS
(For base and cabin, please see chassis base datasheet)
Aluminium tipper
Hydraulic piston
Safety feature: non-return valve and safety stand
2 side loading, lockable panels
2 tool holders
Maximum unloading height: 1.40m
Loading height:
- Side loading (with open panels) : 1.40m
- Rear loading: 1.70m
Volume Capacity: 1.80 m3
OPTIONS
Neting cover
|
|
MEGA Multitruck Tipper, Highly versatile.
Highly versatile, the MEGA Tipper has been developed for all types of proximity transport. It appeals through its manoeuvrability and its design.
The tipper raises to 43°, has storage space under the tipper, the tipper side panels are of aluminium. It is also equipped with the largest cab in its category, that enables the comfortable and safe seating of two operators. With the optional cage the load volume can be as much as 2.3 m3 allowing a great deal of autonomy to the street and garden cleaning teams.
The diesel engine coupled with an automatic CVT transmission provides flexibility in use as well as a low fuel consumption (approx. 4.4 l / 100 km).
The MEGA Tipper: versatility and low running costs
Tipping Angle: 43° to ± 5°
Operation Time: < 8 seconds
Electric/hydraulic pump: 12 V - 1800 W
Telescopic hydraulic ram: diameter 45mm
Aluminium tipper with detachable drop down sides
|
|
Electric Vehicle ATX280E
Here is the answer for the professionals and organizations that are searching for a compact electric utility vehicle with great power and resistance, zero emission and a superlative load capacity. No compromises were made building this machine able to load up to 1000 kg on the loading bed and tow 3000 kg without problems.
ATX280E is an outstanding electric utility vehicle with no competitors: 6 kW SEM excitation engine, double speed mode, engine braking system with energy recovery, full floating rear axle, auxiliary cooling electrofan for jobs in tough conditions, best in class 600 A controller, 24x2 V removable high performance cells and on-board high frequency charger to plug everywhere.
|
|
Isothermal van
SEPCIFICATIONS
Tipper deck mounting allows for easy access to the batteries
80mm thick, KLEGE-EUROPE Isothermal case
Class A accreditation (France)
Single door: left hand side, right hand side or rear
Roof mounted warning light
Optional chiller unit
OPTIONS
Chiller unit: mains operated V090 230 V-16 A exterior evaporator
The chiller unit only works if the vehicle is not in motion and when it’s connected to a 230V mains supply
6 removable stainless steel racks
|
|
ST1-A900 / ST1-A1500
Passengers transport
RANGE OF APPLICATIONS
Thanks to their small dimensions, our electric vehicles can be used in all the structures of production, distribution or service, for small, medium or big sites : Industries, attraction parks, exhibition parks, places of interests, leisure centres, campings, airoports, hospitals, warehouses, maintenance services, persons with reduced mobility, ...
GUARANTEE
3 years for the frame
1 year for the electric part
1 year for the batteries
All our vehicles may be adapted and personalized according to your needs.
|
|
Shuttle, 100 % Electric.
Specially designed for hotels, resorts, leisure parks and airports
4 or 6-person seating
|
|
|
|
|
|
Modec is a revolutionary zero emission commercial vehicule. Economically and envoronmentally viable, the vehicule is purpose built from the ground up.
The modec is perfect for the demanding urban environment. With a 5,5 tonne GVW, this silent truck is capable of travelling at a swift 50mph over, a range of up to 100 miles or 60 miles.
The Modec standerd dropside vehicule is fitted with an entry step on both sides and a chequer-plate non-slip walkway platform, is located behind the cab, for access to the cab entry door
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
Mega Multitruck Skip Tipper
Equipped with an aluminium skip with a 2m3 capacity, a double lever hydraulic system, tipping to an angle of 90° and a low loading height, that makes loading, unloading and cleaning of the skip very simple.
With a width of 1.4m the MeGA skip tipper can go into the narrowest of streets without compromising the carrying capacity.
The automatic CVT transmission specially developed for small trips provides driver comfort and a reduced maintenance. And because the waste bins are often situated at either side of the road, the flat cabin floor enables the driver to leave the cab from either side.
Silent, the electric version is ideally suited to early morning work and to busy pedestrian streets.
The MEGA skip tipper: loading height of only 1m
Tipping Angle: approx. 90º
Operation Time: < 8 seconds
Electric / hydraulic pump: 12 V - 700 W
Remote switch on lead
High resistance aluminium skip
Access door on right side of skip
|
|
Electric Vehicle for Waste Collecting ATX200E AR
The ATX E range of Alkè electric vehicles includes the AR version, a special machine equipped with waste collection body, designed for use in cities and towns, sport centres, railway stations, airports, camping sites and tourist villages.
The AR version has a waste collection body built with anti-corrosion aluminium and may be integrated with an optional automatic bin lifting system for 120 and 240 litre bins. The waste body has a 2 cubic metres capacity (410 kg of nominal capacity) with a tipping angle of 90° that allows the waste to be dumped directly into the auto-compacting machines.
|
|
Electric Pump Watering System
Skid mounted system, anticorrosive treated steel frame, rapid mounting on tipper deck
500L polyester tank with anti-rock bulkhead
30L / minute pump with pneumatic pressure switch
700W, 24V electric motor with DC converter
25m, Ø 19 mm anti-crush hose mounted on manual hose reel
1m Spray gun with rose fixture
Optional : only watering
Spray gun extension arm
15m Automatic hose reel
2m telescopic spray gun with rose fixture
DOSMATIC proportional feeder
Rate: 0.5 - 2.5% or 1 - 5% (Including diluted fertilizer)
Option : spraying and watering with 2 pumps
SPECIFICATIONS
SPRAY EQUIPMENT
- Removable unit
- 12V Electric pump: 5.5L/min, 1 bar pressure (DC converter (48v – 12v)
- 2-nozzle hand spray with guard (0.8 & 1mm)
- 15m automatic hose reel
- DOSMATIC proportional feeder
- Rate: 0.5 - 2.5%
OPTIONS
- Second pump
- (Two pumps feed one hose with an integrated bypass)
|
|
|
|
|
|
This is a general purpose type prover presently being used in the gas and petroleum industries. It could be adapted or modified for use in other industries as well. A range of sizes, up to 1500 gallons, can be produced.
An example of a trailer mounted prover is the 100 Gallon Volumetric Liquified Petroleum Gas Prover. This prover is in use by a State Bureau for the purpose of accurately measuring and checking flow meters and gauges. It is mounted on a trailer for maximum mobility and convenience for transporting the unit to inside or outside mounted meters. It can be used to check meters measuring LP (liquid petroleum gas) being loaded into the truck and or those meters measuring the gas as it is dispensed from the vehicle.
Any standard, or custom measures, or provers can be trailer or truck mounted to your specifications and for all industries whether it's for in-yard or over-the-road purposes.
Custom trailers meet all I.C.C. regulations. They can be equipped with brakes and can be leveled by jack screws or hydraulic jacks. Dual axles are available where required.
Benefits of Prover Systems are directed towards manpower and human resource savings which provide increased productivity, safety, visibility and ease of operation. Added results, improved customer relations.
|
|
MOBILE FUEL BOWSER 220/300/500G
Fuel Bowser Range
* Fully bunded monocoque chassis.
* 4 lifting eyes.
* Full beam torsion suspension.
* Bradley auto reverse hitch.
* Pressure relief manhole.
* Flow meter, 12V pump, 12v battery, hose & nozzle.
* Solar panel.
* ADR option available.
|
|
Road tankers
Hydrocarbon tanker
One compartment 37,000 litres and Seven compartments 37,000 litres
Since its creation in 1939, Maisonneuve has always tried to diversify its production.
Maisonneuve is a real specialist in tankers and units for water treatment industry.
|
|
Cutting Edge from JCB - The JCB Groundcare Garden Tractor is a breed apart when it comes to cutting and collecting, in wet or dry conditions. A high specification machine that is easy and convenient to use the JCB Garden Tractor not only cuts immaculately, but is capable of working throughout the year as a tough all-round machine.
|
|
EXT
LENGTH
Closed length 45'-0", Length settings every 5'-0" to max. 65'-0" length.
Closed length 45'-0", Length settings every 5'-0" to max. 75'-0" length.
Closed length 48'-0", Length settings every 5'-0" to max. 78'-0" length.
Closed length 48'-0", Length settings every 5'-0" to max. 80'-0" length.
Closed length 53'-0", Length settings every 5'-0" to max. 80'-0" length.
WIDTH 96" Overall with 91-3/4" bed width.
HEIGHT 60" deck height with fifth wheel height of 48-11/16"
KING PIN 36" from front of trailer.
CROSSMEMBERS 4" Deep x 2-1/4", 3. 19# high tensile steel I-beams on 20" centers.
LANDING GEAR Vertical 2-speed gear with 10"x10" sand shoes, 1-1/4" standard pipe back and cross bracing.
|
|
LENGTH 32'-0" Inside. 34' 8-13/16" Overall
WIDTH Outside ---------------------------- 100".
Outside including tires ---------- 102".
Inside -------------------------------- 90".
HEIGHT 58-5/8" Floor height no load with 11-24.5 tires.
115-13/16" Overall height level at front.
29'-2-13/16" Overall height extended at front.
DUMP ANGLE 45 Degrees with 48" fifth wheel height.
FRONT 1/4" AR450
MEMBERS 7 gauge x 4" x 8" grade 60 fabricated steel
BOLSTERS 3/16" 60 steel boxed sections -- 3 locations
SIDES/FLOORS 1/4" AR450 body panels with 7 Ga A500 grade B steel boxed caprail at top
SIDE BOARDS none
|
|
Standard equipment:
Tandem axle 3-leaf suspension
22,500-lb. axles with steel hub-piloted/cast drums
Continuous belt with vulcanized side ribs
16" post spacings
Direct hydrostatic drive
Planetary grearbox and motor
(8) 22.5 x 8.25 10-hole hub-piloted disc-type wheels
(8) 11R22.5 radial tires
Riveted aluminum body
2-speed landing gear
3/16" plastic slope liner
Side-swing door with lower knife gate
Auto-lube chain oiler system
Single color (white) pre-painted side sheets
Rear manual controls (door/belt)
Rear flow control
**Anti-lock brake system
|
|
SEMI TRAILER CONTRACTOR TIPPER (fixed panels)
Reinforced public works chassis, continuous weld body, 11 thick reinforced blade mechanical suspension, sanding before painting, tipping by front ram or CIF compass.
|
|
ROCKSTAR HALF PIPE TIPPING TRAILER
Rockstar Semi Tipper Range
* Hardox steel body – 6mm floor, 4mm sides
* Front lift axle
* Automatic tail door
* Automatic dump of air suspension when tipping
* Roll over cover
|
|
"ULD-II, Ultra Light"
LENGTH
Over-all, 38'-0", 35'-0", 31'-0", 26'-0" models available. 38' Model will legally bridge and gross 80,000 lbs. max with most 5-axle rigs.
WIDTH
Body is 94" wide, designed to keep material center of gravity closer to longitudinal body centerline. Over-all width 102" including tires.
DUMP ANGLE
43.5-ULD-26, 50.0-ULD-31, 44.3-ULD-35, and 46.4 Degrees ULD-38 with 48" fifth wheel height. Center of gravity lower during dump cycle.
FRONT SECTION
Square with reduced frontal area, decreases wind drag and promotes fuel economy.
|
|
STANDARD EQUIPMENT
Tandem axle 3-leaf suspension
22,500-lb. axles with steel hub-piloted/cast drums
63" live floor: 2-strand drag chain with belt segments
Direct hydrostatic drive
Dual planetary grearbox and motor
(8) 22.5 x 8.25 10-hole hub-piloted disc-type wheels
(8) 11R22.5 radial tires
Aluminum body with aluminum front & rear fenders
2-speed landing gear
Plastic liner on floor & 3/16" slope plastic
To-hinged hydraulic tailgate
Rear manual controls
**Anti-lock brake system
|
|
|
To meet the most extreme handling requirements, whatever the type of cargo, the payload or the dimensions, GAUSSIN industrial vehicles individually designed cover all special demands, with components taken out of our modular standard parts system.
|
|
|
|
|
|
TIPPING LIFT TRAILERS
CASE EQUIPMENTS
> 1 Very thick stainless steel or painted steel monocoque case.
> 2 Right and left side with supports realised by pressing.
> 3 Panels in front and in the back also pressed.
> 4 Anti-swirl peripheral superior supports.
> 5 Stainless case strips or epoxy, welded on the case.
> 6 Headings consolidated by stainless or steel wire stretcher, welded on the case strips.
> 7 Anti-splashes cover flaps on both sides of the door.
> 8 Anti-deformation door supports.
CHASSIS EQUIPMENTS
> The structure of the chassis is done in sheet steel with a thickness of 8 mm.
> The chisels are done in rectangular profile steel.
> The cradles and the supports of jacks are also very thick, in order to avoid any deformations.
> Adjustable arrow 2 positions.
> Screw crutch.
> Hydraulic dumping by hoses.
> Anti-scrap protection on jacks.
> Parking brake.
> Lighting in conformity with the law in vigour.
> Hydraulic braking on models BBE 60 and 60.
FOR OTHER OPTIONS AND DIFFERENT MODELS, PLEASE SEE THE DATA SHEET OR CONTACT THE COMMERCIAL DEPARTMENT...
|
|
The robust and handy tractor copes with all tasks occurring in industrial and local authority use all year round. Featuring a wide variety of attachments to perfectly suit all working situations.
|
|
The SB300 S is a truck-mounted kit, normally fixed to the chassis frame. It can also be engineered for a demountable application. This model is suitable for commercial and military uses.
The truck can be a 6x4 or an 8x4 axle model to support the container weight. The hydraulic system of the truck-mount is PTO /pump driven.
This kit comes with an internationally approved radio remote control, and can also be supplied as a cable remote with a 10m cable.
The SB300 series can also handle transfers to other vehicles.
|
|
STANDARD WINE MONOCOQUE TRAILERS
> Flooring strengthened by transversal angle iron.
> Case angle 45°.
> Sides veined by pressing.
> Lateral pressed supports, continuous welded and fixed.
> Tube-shaped case strips 200 X 100.
> Girdle higher case.
> Rear door 1 swing with automatic opening.
> Rear door on 18 and 24 tonne models.
> Security on swing for silage .
> Grained trapdoor 400 X 400 mm, with fertilizer discharge spout.
> Access scale on the front panel.
> Chassis rectangular tube 300 X 100.
> Hydraulic crutch (except on BMS 08).
> Adjustable arrow spring (6 positions).
> Swing by hoses till BMEB 16
> Swing by hoses till BMEB 16
> Jack provided with chute valve
> Hydraulic brake on each wheel.
> Fire protection.
> Tail light support.
> 20Hoses support
FOR THE OPTIONS AND THE DIMENSIONAL CHARACTERISTICS DOWNLOAD THE WORKSHEET OR CONTACT COMMERCIAL DEPARTMENT...
|
|
DUMP TRAILER
Dump Trailer Range
Agri Dump Trailers
* 12/14/16 ton available.
Fast Tow Dump Trailers
* 16/18/20 ton available.
* Hydraulic up & over back door.
* Rocker bogie & multileaf. suspension.
* 8 & 10 stud axles.
* Full commercial axles.
|
|
HighGard
Fully recyclable High Density PE • Proven in various climates (-50°C/+80°C) • Strong and durable • Easy to install • Light Silver Edge Strip for improved visibility.
Medium Density Mudguards
Fully recyclable PE • Lightweight • Non-rusting • Available in a range of colours • Packaged in a protective polyethylene sleeve.
XGARD
The durable XGard range of mudguards offers technical and optical improvements to meet the high quality demanded by modern vehicle builders and customers.
Textured surface finish • Resistant to most chemicals • Ideal for adjustable rail fitment • Resistant to dirt and scratches • Available in a wide range of colours • Extremely desirable.
|
|
The versatile machine for do-it-yourself jobs
The starting point with the design of Avant 200 series was to develop a compact multi purpose work machine for homeowners, vacation houses and smaller farms.
In garden you can make the flower beds, new lawns and ponds with Avant. It is also an ideal tool for lawn mowing and other maintenance jobs.
In landscaping jobs like building of yards Avant 200 series is a great helper: earthmoving and levelling happens very quickly and easily with the Avant
Avant is a very efficient snow removal machine in winter, and you can also do salt and sand spreading with it.
|
|
|
|
|
|
Versatility combined with economical features
Avant 500 series is a good choice when a versatile and economical machine is required but not all the features of 600 series are necessary. Especially the lifting capabilities of 500 series are excellent: lift height and outreach are practically as good as on 600 series, and lift capacity with extra counterweights is about 1000 kg (Avant 528).
Alltough auxiliary hydraulics oil flow is lower than the ones in 600 and 700 series, it is still sufficient for multitude of jobs. For example the 1200 mm lawn mower, rotary hoes and backhoe 210 work well with 500 series machines. Hydraulic oil cooler is standard on Avant 528 and optional on Avant 520 – this quarantees efficient oil cooling in situations where auxiliary hydraulics are used with full capacity for a longer period of time.
Thanks to the articulated design Avant 500 series machines are very versatile tools. They are perfect machines for instance:
- On farms where they benefit from the wide attachment range developed for farming.
- Demanding Do-It-Yourself work
- Smaller scale landscaping
It is very easy to learn to drive an articulated Avant. This means the machine can be operated by several persons after a basic training.
|
|
|
|
Trailers, Utility vehicles
