|
|
An easily fitted insert.
The CLAV-SERT thread inserts consist of rigid one-piece bushes
Depending on the diameter of the insert, 2 or 4 grooves in the bush have 2 or 4 locking keys.
Resistant to pulling
The fitting of the insert could not be simpler. It is enough to drill a hole, tap it to the required dimensions, screw in the insert and lock it in position by simultaneously pushing the 2 or 4 keys which will hold the insert against the walls and prevent it from rotating.
CLAV-SERT can be fitted in any material, whether ferrous or non-ferrous. |
|
The CLAV-SERT thread inserts consist of rigid one-piece bushes.
Depending on the diameter of the insert, 2 or 4 grooves in the bush have 2 or 4 locking keys.
The fitting of the insert could not be simpler. It is enough to drill a hole, tap it to the required dimensions, screw in the insert and lock it in position by simultaneously pushing the 2 or 4 keys which will hold the insert against the walls and prevent it from rotating.
CLAV-SERT can be fitted in any material, whether ferrous or non-ferrous. |
|
| NORD-LOCK washers with enlarged outer diameter (sp) in combination with flanged nuts/ bolts are recommended for use on large/long holes, painted surfaces or soft materials, e.g. aluminium. |
|
Originally designed for the Aerospace Industry these inserts made machining billets in fewer operations a possibility, since then they have been used as a cheap low profile workholding solution with zero tool interferance.
These inserts can also provide an invisible form of permanent fastening. For more information visit our web site or call +44 (0)113 290 9852 |
|
- All shapes
- All thicknesses
- All materials (stainless steel, steel, aluminium,
copper, brass, epoxy, fiber, ...)
- All your wedge problems can be solved starting from 0.01 mm. |
|
High quality and competitive price!
Various threaded inserts and fittings made out of brass or steel. Application for molded products, such as epoxy resin parts, DMC parts, SMC parts and other plastic parts. Customre specified parts could be made on request. |
|
Threaded inserts and standard threaded studs for heat insertion, moulding or cold insertion, in all types of plastics.
Advantages : Offers a resistant tapped or threaded mounting, avoids stress in plastics, high resistance to tensile strength and tightening torque.
Material : brass
Dimensions : from M1.6 to M10 ex-stock, other dimensions under request. |
|
| Nuts, Washers, Screws & Studs available in 303 Stainless Steel, 316 Stainless steel, steel, steel chemical blacked, high tensile steel and steel zinc plated |
|
Gripco® has provided quality nuts since 1904 and continues to be an integral partner in the OEM fastener supply industry.
When you have a fastener need, Gripco® has a product. Many factors work together to provide Gripco's cost efficiency including our capabilities in manufacturing, the dependability and consistency of our product, and our responsive scheduling and timely delivery. |
|
Locking Nuts to DIN 934/439
Normal Form
DIN 934 / ISO 4032
Narrow Form
DIN 439 / 936
Locking Nuts with right or left hand thread. Steel zinc plated or stainless steel A2. |
|
Please use the link to check our full range of Washers,Shoulder Washers & Screw Insulators.
We can also custom mould if you require a special size or configuration,contact our sales team |
|
The suitable fastening element for your application!
Why Arnold & Shinjo should be your choice:
- Fully automated processing of all fastening elements
- Sheet thickness for piercing nuts from 0,6 to 4,0mm
- All fastening elements available with the surface of your choice
- Customised special solutions
- For virtually all sheet qualities
In one production step the hole is punched and the fastening element, the piercing nut, is connected inseparable with the panel. The possible applications for the system, ranging from aluminium sheet to high-strength or pre-coated sheet metal and various final products, open up new vistas for cost reductions. |
|
In one production step the hole is punched and the fastening element, the piercing nut, is connected inseparable with the panel. The possible applications for the system, ranging from aluminium sheet to high-strength or pre-coated sheet metal and various final products, open up new vistas for cost reductions.
The versatility of applications, the profitableness, and the efficiency of the processing method, as the multitude of advantages compared with traditional joining techniques make more and more users all over te world to rely on this unique system. |
|
Pins with levelling head
Dimensions of M2.5 with M8
Matter steel zinc coated blanc*
For thickness of sheet from 1 to 3 mm
Ensure an assembly by screwing high characteristics (forced wrenching, various loads...)
Allows very powerful fixings
Very simple installation using a press |
|
Elite offers a broad range of levelling or emerging pins to you, with broad head allowing a great resistance in fine sheets or of the smooth pins.
One insert the head of the pin in sheet, the metal moved by the head will creep towards the throat thus creating a final assembly and offering important resistances to tightening and traction.
|
|
Hex nuts DIN 934
Hex washer faced nuts
Hex flat nuts
Flat hext washer faced nuts
Hex cap nuts
Hex dome nuts DIN 1587
Hex insulating cap nuts
Slotted nuts-plugs
Round nuts
Thumb nuts |
|
| Heavy gripnut for universal use. Sturdy construction to be secured tightly by hand. The metric brass internal screwthread has been inserted and is available for M6, M8 and M10. A costsaving and aesthetically embellishing product. |
|
Our product range offers an array of rivets, screws, washers and nuts to help secure and fasten components and/or panels to a wide variety of material such as wood, metal, particle board, plastic and rubber surfaces. There are many styles to choose from: blind hole, driver fasteners, snap lock pins, snap rivets and push rivets which can be removed, unscrewed and pushed/pulled depending on the rivet type.
The wide product spectrum of plastic screws, washers and nuts conform to relevant DIN standards, are available in different drive formats, thread and hole sizes. Products are offered in a wide range of materials, including standard Nylon 6/6, Nylon 6, V0 rated Nylon, Polyethylene, Acetal and Polysulfone for high temperature applications.
Typical applications include point of purchase display products, consumer electronics, white goods, the automotive industry, white goods and telecoms and datacoms markets.
Custom parts are available. Please contact your local Richco Office to discuss your requirements. |
|
Easily Assembled
No Special tools Required
Neat Appearance
Non Corrosive
Versatile & Inexpensive
Ideal for blind fixing |
|
| A full range of plastic screws with a good resistance to liquids , in a wide range of colours. |
|
Please use the link to check our full range of Screws,Bolts & Threaded Rod.
We can also custom mould if you require a special size or configuration. |
|
BÜLTE PLASTICS
offers a wide range of plastic Washers : 38 models and more than 900 sizes
These washers have numerous properties :
1. different forms : our washers can be manufactured with interior diameter between 2,0 and 40,0 mm,
2. different materials : PA, PA6.6, PP, PE, POM, PVDF, PTFE, %u2026
3. variety of colours (RAL), and custom-manufacture washers to your exact specifications.
Our different washers are :
LOCKING AND SEALING WASHERS,
FLAT WASHERS : DIN125, DIN433, DIN9021
ANTI-LOSS WASHERS
LOCATING WASHERS
HOLDING WASHERS
FIBRE WASHERS
SELF-ADHESIVE WASHERS - NEW
GLASS FILLED WASHERS - NEW
%u2026
Our parts can be found across all industrial sectors, Electrical & Electronics, Automotive, Chemical, Household goods etc, and in any number of applications.
BÜLTE PLASTICS can manufacture your washer suitable to your specifications.
|
|
| For protection of varnish, enamel, glass, fabrics, ceramics etc. Developed for assembly of several kinds of screws. Especially fit for coachbuilding, yachtbuilding, furniture industries. Owing to anti -loss-lips also to be pre assembled without a risc. Also available in assortment box. |
|
Spinner-Grip Flange Lock Nut
Spinner-GripTM Flange Lock Nuts are the latest innovation in locking nuts. Free Spinning installation eliminates the need to "wrench" the nut down the thread.
Grade 8 strength and quality, but will work with any grade of fastener.
Does not damage threads or plating on fasteners.
Locks to the part - not to the threads. (Exceptional performance in applications with heavy vibration)
Greater temperature range than nylon insert locknuts.
Hardness of 28 - 38 HRc - More effective at maintaining clamp load under vibration.
Not limited to 5 reuses, as with most other torque lock nuts. |
|
| One-step installation, reusable self-sealing screws, bolts and nuts (plus non-reusable rivets) which seal to 6,000 psi internal/external. Eliminates need for thread sealants/adhesives. Design assures fastening integrity of intimate metal-to-metal contact with patented integral silicone O-Ring located in assymitrical groove located in the the heads underside. Compatible with all surface finishes. Wide selection of head types in imperial and metric sizes. RoHS Compliant. UL listed. Stainless steel self -sealing washers with bonded silicone surface that seal large holes and mounting slots available in several sizes. |
|
High-strength fixings for applications to high mechanical characteristics.
Matter: aluminum, steel, stainless
Diameters: 4,8-6,4-8,0 and 10,0 mm |
|
|
|
Screws and Bolts, Inserts, Rivets
