Screws with hexagonal head

Diameter: 6 mm - 24 mm
Length: 30 mm - 150 mm

Hex Head Clamping Screw made of Steel Material: SCM435 Steel Black oxide finish Quenched and tempered (Rc33 - 39) Size: M6 to M24 30 mm to 150 mm

Swivel Contact Bolts(Flat) S45C steel Quenched and tempered(for M4-M8 screw) Black oxide finish SUJ2 steel Heat treated to HRC56-67

Diameter: 4 mm - 24 mm
Length: 9.9 mm - 94.7 mm

Material:Screw carbon steel. Ball ball-bearing steel.Version:Screw grade min. 10.9, black. Ball hardened, bright.Note:Form A with full ball is used when a clean, polished contact surface is required. ...

Diameter: 4 mm - 16 mm
Length: 8 mm - 80 mm

... : hexagon head screw with collar K1492 + Hygienic USIT® seal and shim washer K1491. Only the combination of a hexagon head screw with collar and the Hygienic USIT® ...

Diameter: 20 mm - 30 mm
Length: 24.5 mm

Material:Housing and cap brass. Air filter electro zinc-plated steel wire mesh.Version:Air filter mesh 50 - 60 µm. Flat seal asbestos-free.Drawing reference: 1) flat seal 2) vent hole 2x 3) air filter 4) cap

Clamping screws, ball terminal, steel Material: Black-oxide steel, hexagon socket head. Standard executions: Hardened steel ball. GN 605-A: ball for applications requiring a single point contact. GN ...

Diameter: 4 mm - 40 mm
Length: 13, 8 mm

... preloaded force in the threaded connection, even when put under high dynamic stress. These RS PRO screwlock assemblies are types of accessories which can be used with D-sub hoods and backshells. The assemblies consist ...

Diameter: 5 mm - 10 mm
Length: 10 mm - 50 mm

GN 1580 Stainless Steel-Screws and nuts in Hygienic Design are certified according to EHEDG guidelines and are therefore ideal for use in hygienic areas. The sealed mounting surface enables components to be mounted without ...

Length: 6 mm - 70 mm

Made from Nylon 6.6 (PA6.6) Resistant to corrosion, oil, abrasion and most chemicals Easy application, better grip and more control (no cam-out effect) The optimal torque transmission leads to a longer tool life

Length: 10 mm - 35 mm

Made from Polycarbonate (PC) High transparency Light weight Heat resistance up to 115°C Good electrical insulation properties

Length: 10 mm - 40 mm

Made from PVDF Temperature restistance up to 150°C High mechanical strenght and toughness Excellent resistance against chemicals and gasses Very low moisture absorption ensures good weather resistance Refer to standard ISO 4017, ...

Diameter: 4 mm - 16 mm
Length: 20 mm - 200 mm

Diameter: 4, 5, 6, 6 mm
Length: 13 mm - 50 mm

DIN 7504 K Similiar to ISO 15480 Self drilling screws, hexagonal head with flange (type K)

Diameter: 3 mm - 8 mm
Length: 9.5 mm - 100 mm

DIN 7976 Similiar to ISO 1479 Tapping screws, hexagon head, type C (with cone point)

Diameter: 8, 10, 12 mm

STOP SCREW ADJUSTMENT SCREW ► Stop stroke adjustment screw for M12 sensor mount ► Stop stroke adjustment screw with customizable sensor mount

Diameter: 8, 10 mm

STOP SCREW ADJUSTMENT SCREW ► Stop stroke adjustment screw with customizable sensor mount

Diameter: 2 mm - 14 mm
Length: 4 mm - 200 mm

HEXAGON HEAD SCREW - STAINLESS A2 - DIN 933 - ISO 4017

Diameter: 5 mm - 16 mm
Length: 25 mm - 300 mm

HEXAGON HEAD WOOD SCREW - STAINLESS STEEL A2 - DIN 571 INOX A2 - DIN 571 DIN 571

Diameter: 0 in - 1 in
Length: 0.38 in - 4 in

HEXAGON HEAD SCREW - STAINLESS STEEL A2 INOX A2 (Model : 223103)

Diameter: 4 mm
Length: 16 mm

Hexagon Head Self Drilling Screw DIN 7504 Form K - with Flange, Stainless Steel A2 Packaging - Goebel Drilling capacity - max. 3,0 mm Material - A2 Disc - without Head shape - Hex ...

Diameter: 4 mm
Length: 12 mm

... Hexagon washer head self drilling screws Hexagon Head Self Drilling Screw DIN 7504 Form K - with Flange, Stainless Steel A2 with Assembled Polyamide Washer Packaging ...

Diameter: 4 mm
Length: 13 mm

DIN 7504 K Hexagon washer head self drilling screws Hexagon Head Self Drilling Screw DIN 7504 Form K - with Flange, Stainless Steel A2 with Assembled EPDM + Stainless ...

Length: 2.5 mm - 60 mm

DIN916 ISO4029 Hexagon socket set screws with spring-loaded thrust pad. DIN916 ISO4029 Hexagon socket set screws with cup point.

Diameter: 12 mm - 30 mm
Length: 175, 125 mm

The R1 Series is a range of leveling studs with small hexagon on top. The studs have diameters ranging from M12 x 1.5 mm up to M30 x 2 mm and lengths of 125 mm up to 175 mm. They are plated with blue zinc and is ideal for PRP Jacmount® ...

Diameter: 12 mm - 30 mm
Length: 125 mm - 175 mm

The R2 Series, manufactured by AirLoc, is a levelling stud equipped with hexagon on top. It has a maximum length of 175 mm and weight of 0.63 kg. Additionally, the levelling stud is suitable to work with PRP Jacmount® Adjustable Levelers.

Diameter: 20 mm
Length: 175, 150 mm

The SW15 series of levelling screw is engineered with a hexagonal head. Moreover, this unit is ideally used with PRS or PRSK Jacmount Adjustable Levers.

Diameter: 8 mm - 30 mm
Length: 36.6 mm - 100 mm

Diameter: 12 mm - 24 mm
Length: 30 mm - 90 mm

SNHDS is a duplex stainless steel hexagon head screw Duplex stainless steel has the great properties of both austenitic and ferritic steel. It has an excellent strength and corrosion resistance compared ...

Diameter: 3 mm - 8 mm
Length: 6 mm - 35 mm

... Hex Head Screw with Teflon Coating for Head The screw head is coated with Teflon. This increases the chemical resistance of the screw ...

Diameter: 3 mm - 12 mm
Length: 6 mm - 60 mm

SPT is a hex head plastic screw made of PTFE (Teflon). PTFE (Teflon）is a plastic with excellent heat resistance, electrical properties, chemical resistance, and abrasion resistance. Most chemicals ...

Diameter: 4 mm - 42 mm
Length: 25 mm - 450 mm

SCREWS HEXAGON HEAD BOLTS BLACK HEXAGON HEAD BOLT DIN 931 8.8 PV (EQUIVALENT ISO 4014)

Diameter: 5 mm - 36 mm
Length: 30 mm - 300 mm

DIN 931 8.8 ZN (EQUIVALENT ISO 4014) ZINC PLATED HEXAGON HEAD BOLT

Diameter: 8 mm - 30 mm
Length: 40 mm - 220 mm

DIN 931 8.8 HDG (EQUIVALENT ISO 4014) HDG ISO FITTING HEXAGON HEAD SCREW

Vent Screws / Bleeding Screw Operating Pressure: max. 400 bar Versions: G1/4 and G1/8 - Visually identical to screw plugs - Less damage possible by external influences - No lock nut ...

Diameter: 5 mm - 42 mm
Length: 10 mm - 260 mm

Diameter: 5 mm - 42 mm
Length: 6 mm - 200 mm

Diameter: 6 mm
Length: 100, 38, 80 mm

Diameter: 22 mm
Length: 300, 180 mm

... anchoring point 2. Screw bolt into the anchoring ground 3. Tighten hexagonal nut by hand, in this way the nut will center the clamping part without tolerances. 4. Final tightening of the screw ...

Diameter: 9 mm - 57 mm

wege® - the flexible cable gland system in brass, stainless steel and plastic. wege® M Pressing-screws. Material: brass nickel-plated, thread: M12-M63, PG7-PG48

Diameter: 2 mm - 16 mm
Length: 4 mm - 150 mm

Plastic screws are fasteners used for assembling plastic components. Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, ...

Diameter: 3 mm - 12 mm
Length: 10 mm - 60 mm

Refer to the standard ISO 4017, NF EN 24017, DIN 933 only as a guideline

Diameter: 4, 5, 6, 8, 10 mm
Length: 6 mm - 80 mm

Plastic screws are fasteners used for assembling plastic components. Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, ...

Diameter: 5 mm - 9 mm
Length: 30 mm - 150 mm

CLAMP SCREWS - HEX HEAD - RADIUS SURFACE (BJ748) Description These clamp screws are used with fixed stops and supports to locate and hold the workpiece. Radius tip. Made from SAE-4135 ...

Diameter: 5 mm - 70 mm
Length: 5 mm - 120 mm

... large range of Nylon Screws across a number of drive types including Hex, Philips, Socket and Slotted along with head types covering Regular, Slotted or Countersunk (Cheese Head, Knurled ...

Diameter: 2 mm - 5 mm
Length: 4 mm - 100 mm

FULLY THREADED HEX HEAD SCREW Similar to DIN 933 MATERIAL PA (Polyamide) COLOUR Natural NOTES Available in other colours.

Diameter: 3 mm - 14 mm
Length: 14 mm - 90 mm

PARTIALLY THREADED HEX HEAD SCREW Similar to DIN 931 MATERIAL PA (Polyamide) COLOUR Natural NOTES Available in other colours.

Diameter: 12, 16, 20, 25, 30 mm
Length: 8.5, 10.5, 11.5, 12 mm

Pressure screw, metric thread • Material: OT58 (Brass) • Surface treatment: Nickel-plated • Operating temperature: -60°C ÷ 200°C