|
|
| Products 91 to 120 of 214 |
- SPACER MALE / FEMALE WITH UNDERCUT
- COUPLING NUTS ROUND OR HEXAGONAL
- REDUCING NUTS M / F and F / F sample : M8/M10
- THREADED RODS DIN976-A
- DOWEL SCREWS WOOD / METRIC THREAD
- PLASTIC SCREWS and ACCESSORIES
- STAINLESS STEEL SCREWS and ACCESSORIES |
|
| Hand Screws, Knurled screws and Screws available in Cast Iron, Stainless Steel and Steel chemical blacked |
|
The Emile MAURIN company is very well organised to manage the special items.
This type of parts is 45% of our business.
A dedicated team is in charge of the special parts range, answering all customer demands :
* production feasibility
* fastener type choice
We can supply all type of fasteners according to your requirements : raw material, production process, coating, packing, ...
Please find below a view of special parts :
* Special parts :
- cold forging
- hot forging
- bar turning
- cutting
- precision fasteners
- microfasteners
* All materials :
- steel
- stainless steel
- brass
- bronze
- aluminium
- titanium
- plastic
* Finish :
- thread break
- lubrification
- colouring
* Coating :
- Electrolytic zinc :
- with CR 6 : black, green, yellow zinc
- with CR 3 : (conform ROHS directive) white zinc, nickel zinc
- zinc with hight salt test performance (from 48 to 720 hours) with or without topcoat, with different colours
- Lamellar zinc
- Hot galvanisation
- phosphate
- chromium
- nickel
- copper - tin
- coating on stainless steel : passivation, decontamination
* Specific customer specifications :
- package
- label
- AQP items
- PPM items
- control report external laboratory
- specific control documents
- safety stock
- kanban supply process
- EDI |
|
100 Deg Flat Machine Screws
82 Deg Flat Machine Screws
82 Deg Oval Machine Screws
Comb Drive Binder Head Screw
Economy Grade Thumb Screws
Fillister Phillips Machine Screw
Flat-Head Wing Screws
Hex Bolts
Hex Head Machine Screws
Hex Socket Cap Mach. Screws
Knurled Head Thumb Screws
License Plate Fasteners
Metal Core
Metric Econ Gde Thumb Screw
Metric Fill Phillips Mach Scr
Metric Hex Machine Screws
Metric Hex Socket Cap Screws
Metric Nylon Threaded Rod
Metric Phil Flat Mach Screw
Metric Phil Oval Mach Screw
Metric Slotted Grub Screws
Metric Slt Flat Mach Screw
Metric Slt Oval Machine Screw
Metric Slt. Hex Mach Screw
Oval Thumb Screws
Pan Phil Metric Mach Screw
Pan Slt Metric Machine Screw
Phillips Pan in Polycarb. Mat
Polycarb Slt Fill Mach Scr
Round Slotted Machine Screws
Slotted Binder Machine Screws
Slotted Fillister Mach Screw
Slotted Grub Machine Screws
Slotted Hex Bolt
Slotted Hex in Polycarb. Mat
Slotted Hex Machine Screws
Slotted Pan in Polycarb. Mat
Slotted Set Machine Screws
Slotted Washer Hex Bolt
Slt Cheese Metric Mach Screw
Slt Fillister Metric Mach. Screw
Slt Pan Machine Screws
Socket Set Machine Screws
Square Base with Threaded Stud
Threaded Rod
Threaded Studs |
|
Quality screws
We offer a vast range of screws in order to sadisfy the customer needs.
|
|
Self-crimping stud for press fitting
Column-Spacer for press fitting
Flush nut for press fitting
Self-crimping nut for press fitting
Self-crimping cage nut (Square or oblong indenting device)
Weld lugs
|
|
| Arnold Umformtechnik GmbH, the fastener specialist, has explored fresh avenues in marketing the RIVTEX clinch system. When combined with the intelligent tool technology and process system produced by its subsidiary, Arnold & Shinjo, the RIVTEX range, consisting of clinch studs and self-piercing nuts, truly is a cost-reducing package. |
|
Description:
Incline knurl Nuts
Installing nuts in sheet materials which are difficult to joint
This method is easy to apply.
Characteristics:
1.Treatment of thin sheet.
Install this nut on sheet with thickness of not less than 0.6mm.
2.Materials that is difficult to joint with.
This nut can be used on steel materials that is hard to joint with ,and also on materials such as aluminum ,stainless steel and plastics.
3.High installing strength
The part under head has its unique shape,when it is pressed in,sheets are fixed,and higher installation strength is obtained.
4.Easy installation
5.No need for special tooling ,air pressure and hydraulic pressure would be enough for simple installation.
6.The opposite side of nut is flat while the surface is not.
7.Still can be used after surface treatment.
|
|
The CAGE-NUT is a square steel or stainless steel nut enclosed in an elastic metal cage.
- The CAGE-NUT allows tolerance in alignment or positioning.
- Hand-operated installation by compression of the cage in the indenting device.
- Dimensions: M3 to M12 |
|
The nuts to be crimped make it possible to obtain resistant threadings in thin sheets like malleable aluminum, steel and other materials. The nuts do not damage the surfaces painted at the time of the installation.
They guarantee excellent performances of resistance to the couple and wrenching.
Elite offers a wide range of nuts to you: floating, one-eyed, levelling, self-locking or nuts to be stitched in Ci.
|
|
I autofissanti dice C and CS guarantee resistant threads to strong cargos of extraction and torsion on sheets also of minimal thickness (not inferior to 0,8 milimeter). I dice C and CS are constructed in compliance with military detailed lists MIL-N-45938/1.
Autofissanti hinges CH/CHS/CHA to flat head allow to create threads on foils (the minimal thickness 1 milimeter) with elevated guarantees of held to torsion and traction.
The colonnine distance them autofissanti CFSO/CFSOS - CFBSO/CFBSOS have been planned for practical and a fast one
installation with any normal pneumatic, hydraulic or mechanical equipment. It distances them, or with passing thread or
with blind thread, they are used on sheets of not inferior thickness to 1 milimeter. They are not necessary secondary operations of
reaming or slobber before the installation.
|
|
Blind rivet-nuts, open ends or closed ends, with ribs or hexagonal, for thin metal sheets.
All kinds of heads, flat, large, flush, countersunk.
Advantages : Considerable clamping strength, higher than that of a class 8.8 steel screw.
Dimensions : From M3 to M12 ex-stock, other dimensions under request.
Material : steel zinc plated, stainless steel, aluminium, brass. |
|
Description:
JS-1224-3
Material: Carbon steel
Thread Size: 0.216-24(#12-24)
Thread Code: 1224
Shank Code: 1224
Min. sheet thickness: .091
Min. Dist Hole C/L Edge: .31
T + - 0.25: .13
A max: .087
C max: .276
E+ -0.25:.38
other sizes are fully available:
256, 348, 440, 632, 832, 024, 032, 0420, 0428, 0518, 0524, 0616, 0813, 0820
M2, M3, M3.5, M4, M5, M6.
Features:
1. To provide internal thread; the sheet thickness can reach 0.8mm.
2. Carbon steel, stainless steel and aluminum material are available.
3. JSP style can be used on stainless steel sheet. |
|
Description:
JSOA-3.5 M3-6
Materail: Aluminum
Thread Code: 3.5 M3
Min. sheet thickness: 1
Hole size in sheet: 5.4
Min. Dist Hole C/L To Edge:6.8
L 0.05 -0.13: 6
D Dimension - 0.25:3.5
pfc - 0.13: 3.2
C - 0.13: 5.38
H Nom: 6.4
other sizes are fully available:
440, 6440, 632, 8632, 832, 032, 4116, 6116, 6143, 8143, 8169,8194
M3, 3.5M3, M3.5, M4, M5
JBSO,JBSOS,JBSOA,JBS04,JSO4,JSO,JSOS,JTSO,JTSO,JTSOS,JTSOA
Features:
1. Having blind end and throughout end two styles, they are used in case and circuit board so that to play the good role of separation and fastness.
2.Can be used on the stainless steel board thickness 0.04"/1mm.
3. Steel, stainless steel and aluminum material are available. "
|
|
Considerable clamping strength, higher than that of a class 8.8 steel screw.
Dimensions : From M3 to M8 ex-stock, other dimensions under request.
Material : Steel zinc plated, stainless steel. |
|
JHFHB-M8-50
THREAD SIZE: M8*1.25
THREAD CODE: M8
LONG "L" :50
MIN.SHEET THICKNESS: 2
HOLE SIZE IN SHEET 0.08: 8
MaxHole In Attach.Parts: 9.5
H ±0.25: 12.5
S Max.: 3.5
T Max.: 1.78
MIN.DIST. HOLE C/L TO EDGE : 12.7
other sizes are fully available:
256, 440, 632, 832, 024, 032, 0420, 0518, 0616
M2.5, M3, M3.5, M4, M5, M6, M8, M10
JFH,JFHS,JFHA,JTFH,JTFHS,JHFH,JHFHS,JHFHB,JFH4
Features:
1. They are applied on sheet with thickness over 0.02 inches/0.76 mm.
2. Carbon steel, stainless steel and aluminum material are available. |
|
Special fastening components SEAL LOCK® sealing nuts and HELICOIL® lock nuts
Special fastening components are manufactured on fully automatic production and assembly systems:
SEAL LOCK® sealing nuts, the cost-effective solution for reliable sealing of nut and bolt connections in threads and under head presentation against gaseous and liquid media under high pressure. (hydraulic systems, fuel systems and pneumatic systems)
The HELICOIL® lock nut with integrated HELICOIL® SCREWLOCK® is the solution for heavy-duty threaded joints with resistance to torque loss.
HELICOIL® nuts satisfy the high requirements with regard to corrosion, temperature loads, low thread friction and the reusability of threaded parts. |
|
ARNOLD-POWERLOK screws correspond to Property
Class 10.9. By slight carburisation an
additional increase of surface hardness is possible.
® ARNOLDPOWERLOK screws are fastening and
locking elements in one. They can replace mechanical
and chemical lock retention methods.
• Easy fully automatic application is possible
because problems due to locking elements
getting caught are prevented.
• The locking effect is not reduced by temperature
or ageing (as is often the case with chemical
systems).
• Feeding problems caused by rubbed-off plastics
debris on vibratory conveyors cannot occur.
® ARNOLD-POWERLOK screws provide strong and
safe connections. They offer the correct solution
when oscillation and vibration are involved! |
|
NORD-LOCK is a pair of washers with a wedge-locking action meeting DIN 25201 which is a unique method using tension instead of friction. The rise of the cams between the NORD-LOCK washers is greater than the pitch of the bolt. In addition, there are radial teeth on the opposite side. The washers are installed in pairs, cam face to cam face.
When the bolt and/or nut is tightened the teeth grip and seat the mating surfaces. The NORD-LOCK washer is locked in place, allowing movement only across the face of the cams. Any attempt from the bolt/nut to rotate loose is blocked by the wedge effect of the cams.
NORD-LOCK washers positively lock the fastener in a joint which is subjected to any kind of vibration or dynamic loads.
|
|
This self-locking series corresponds in all points to the conventional series, the screw threads being locked by polygonal deformation of one or more turns of the thread.
This deformation results in a powerful locking on the sides of the screw thread and counteracts the unscrewing effects of dynamic stresses, vibrations and thermal loads. The locking torques obtained are comparable with the values indicated in standard ISO 2320.
The stainless steel self-locking thread insert is recognised by its red colour. |
|
Quality screws
We offer a vast range of screws in order to sadisfy the customer needs.
Self drilling screw, self tapping screw
ITEM
L001 |
|
The bush with its cutting slot is a self-tapping attaching part which ensures screwed assemblies for high loads, without wear in case of frequency disassembly of the screw and resisting vibrations in materials with low shearing strength:
light alloys
cast iron, brass, bronze,
non-ferrous metals,
plastics,
laminates, hard woods,
chipboard panels.
Material:
Cemented steel
quenched, zinc plated
yellow bichromate treated
S 250
U-Z36Pb3 brass
Stainless steel
18.9
Other dimensions and materials on request.
Tolerances on tapping 6H over the full length ± 0.2 mm. |
|
| New product! The Single Wing nut or Single Mickey Wing is a matt finish reinforced nylon wing knob with female, male and tapped through thread options, suitable for easy operation, available with various standard colour caps. For all information on our new products download our catalogue from the home page www.rencol.com or contact the sales team on 0845 362 5848 or email: sales@rencol.com. |
|
NORD-LOCK is a pair of washers with a wedge-locking action meeting DIN 25201 which is a unique method using tension instead of friction. The rise of the cams between the NORD-LOCK washers is greater than the pitch of the bolt. In addition, there are radial teeth on the opposite side.
The washers are installed in pairs, cam face to cam face. |
|
This rapid and reliable fastening system for medium and high volume applications can be used in various domains. Even if
some of them are specially designed for electrical or electronic applications, most of them are installed in a wide range of
sectors, such as household goods, lighting, light metal fabrication and automotive. |
|
An ONDUFIL ® spring washer is a round elastic item of the same family as our undulated, Belleville or Diaphragm spring washers, derived from a new manufacturing technology which consists of simultaneously rolling and corrugating a flat wire corresponding to the ring's width.
Due to smaller and smaller overall dimensions, compression forces (dips) in the field of larger and larger elastic deformations, and more and more varied stiffeners attainable with this complementary technology, an ONDUFIL® spring washer affords a perfect solution.
Our integrated design and engineering department using powerful computational software is capable today of responding rapidly to your needs.
Our totally integrated production workshop is capable today of making ONDUFIL® spring washers from a prototype for large manufacturing series production runs. |
|
|
|
Screws and Bolts, Inserts, Rivets
