|
|
|
|
|
|
Kaller Controllable Gas Springs (Patended product) are a family of gas springs, for use in press tools, that can be locked in their bottom position and where the return stroke of the spring can be controlled.
Kaller controllable springs (KF-springs) are a family of gas springs, for use in press tools, that can be locked in their bottom position where the return stroke of the spring can be controlled.
The KF springs can be used where, for instance, the blank holder should be locked in its bottom position to avoid deformation of the formed part or when it's beneficial for the transportation of the part.
The controllable springs are available as 15 kN, 30 kN, 50 kN, 75 kN springs with stroke length from 10 to 160 mm. As the stroke length always has to be fully utilised, the springs can be ordered with any stroke length between 10 and 160 mm (in incremental steps of 1 mm).
For optimal function the full stroke should be used within ± 0,5 mm.
The return stroke of the springs is normally controlled using the control system of the press. The springs can be installed self-contained or connected to a control unit through a hose system. The recommendation is to connect them to a control unit. The basic version of the springs, called KF, will have a small spring back of 1 mm before it comes to a complete stop.
|
|
|
|
|
|
Econoloc Gas Springs eliminate the need for separate safety rods in critical lift-assist applications. They positively lock when fully extended, protecting the operator from potential injury in the unlikely event of Gas Spring failure through overload or misuse.
Simple to use, the lockable gas spring operates automatically. When the Gas Spring is fully extended a spring loaded locking shroud moves into place, preventing the Gas Spring from compressing. The Econoloc gas spring is manually released by applying thumb pressure to the designated area of the locking shroud, allowing the Gas Spring to compress in a controlled manner.
The locking shroud is finished with the same epoxy coating as the Gas Spring body, providing excellent corrosion resistance and an attractive appearance. A guide inside the shroud prevents scratching of the Gas Spring cylinder.
Econoloc Gas Springs combine superior ArvinMeritor quality with the added safety feature required in many heavy duty applications, such as trucks, construction machinery, switch gear and agricultural equipment. A single Econoloc Gas spring can be used in conjunction with a standard ArvinMeritor Swift & Sure Gas Spring.
|
|
DICTATOR produces custom-built gas springs of high quality working even under extreme conditions reliably and for a long period. Additionally DICTATOR offers free of charge an individual consulting and calculation service.
The DICTATOR range includes push and pull type gas springs, locking gas springs, double cylinder gas springs (extending speed adjustable), also in stainless steel. For e.g. applications in medical sectors gas springs of completely anti-magnetic stainless steel are available. A wide range of additional options allow the individual adaption to any application.
In general DICTATOR delivers the gas springs although customized after 10 working days. By a rush order you can reduce the delivery time to 3 working days. Under certain conditions it is even possible to produce and deliver the same day.
|
|
|
|
|
|
Stainless steel gas springs for the most exacting applications
A compact design, a high level of functional comfort, and high operational safety, combined with the special material properties of stainless steel open up many new opportunities:
For example, in ship building...
STABILUS gas spring facilitate opening and safe propping of flaps and covers, even in a salt-water environment.
For example, in environmental technology…
They easily and safely open and close maintenance flaps and manholes, without polluting the water.
For example, in medical technology…
STABILUS gas springs made of stainless steel can be used in medical devices, hospital beds, and operating tables, especially when non-magnetic properties are required in addition to total cleanliness.
For example, in the food and pharmaceutical industry…
When the gas spring has to be robust against external environmental effects, stainless steel gas springs from STABILUS do convince for many years by their full function and attractive appearance.
|
|
The big variety of easylift gas traction springs offers
"attractive" arguments for creative engineers.
Controlled pulling and adjusting, also damped on request,
according to your requirements.
|
|
DICTATOR Pull-type gas springs are the answer to your problems if you
are unable to use normal push-type gas springs due to a lack of space. They work in the opposite way to push-type gas springs as the gas pressure inside the cylinder causes the piston rod to retract inwards.
Depending on how they are installed, pull-type gas springs either open or close flaps, windows and hatchways.
In the same way as with push-type gas springs, we manufacture your pull-type gas springs
- according to your individual application requirements
- also as a single unit, in small or large batches.
We offer a design service, that means, you send us the information on your application and we calculate the required gasspring.
|
|
| ... products without technical information |
| |
|
|
Gas springs
