|
|
ARNOLD-POWERLOK screws correspond to Property
Class 10.9. By slight carburisation an
additional increase of surface hardness is possible.
® ARNOLDPOWERLOK screws are fastening and
locking elements in one. They can replace mechanical
and chemical lock retention methods.
• Easy fully automatic application is possible
because problems due to locking elements
getting caught are prevented.
• The locking effect is not reduced by temperature
or ageing (as is often the case with chemical
systems).
• Feeding problems caused by rubbed-off plastics
debris on vibratory conveyors cannot occur.
® ARNOLD-POWERLOK screws provide strong and
safe connections. They offer the correct solution
when oscillation and vibration are involved!
|
|
Specifications
Sizes: #8 to 1/4"
Lengths: 3/4" to 3-15/16"
Head Styles: Flat and wafer
Drive System: Phillips
Point Styles: Types 3 and 4
Material: Carbon steel
Finishes: Phosphate or gray Stalgard®coating
Features & Benefits
Eliminates costly pre-drilling of wood
Broad selection of sizes
Can be used with steel up to 5/16" thick
Gray Stalgard coating provides 1000 hours of salt spray resistance and was developed for use with ACQ treated lumber with retention levels no higher than 25 PCF
|
|
Taptite 2000 eliminates the need for pre tapped threads, as they create their own threads on installation, therefore reducing pre-assembly costs.
Other advantages are low thread forming torques, High strip torques and High clamping forces, therefore offering a superior process-reliable fixing.
|
|
|
Remform® screws have been designed specifically for applications in plastics, with their unique thread profile, they offer low screwing in torques coupled with high strip torques make Remform® the perfect answer when looking for the right screw for plastics applications
|
|
|
|
|
|
|
Substitute the drive code for the ? and the length for the L In the part no. to specify the exact part required. The 30 deg. Flank angle and recessed core diameter of these thread forming screws for plastic have been developed following theoretical appraisal, exhaustive calculations and final proof testing. The 30 deg. Flank angle produces low radial forces when engaging the plastic, therefore resulting in less radial stresses, in other words the hoop stresses in the plastic bosses are less than those experienced with conventional screws. The recessed core geometry provides the ideal flow director for the displaced plastic, encouraging a uniform flow to fill the pitch of the screw without material jamming. This results in the maximum amount of plastic being engaged providing higher sheer loads due to the increased bearing depth of the thread. A combination of the above and the ease of penetration of the 30 deg. Flank angle through the material, encouraging plastic flow, reduces the torque required to drive the screw in. This therefore increases the margin between drive and stripping torque which minimises the potential of stripping during installation. The optimum pitch and maximum fill features provided by the recessed core results in a large area of plastic to be sheered prior to screw failure in tension. This creates a high resistance to pullout loads.
|
|
Huck-Spin® (Small dia.)
All the advantages of the large-diameter Huck-Spin packaged for 1/4",5/16", and 3/8" applications. Swaged-on, vibration-proof clamp. No pintail noise, waste, or exposed fracture surface. Swift, accurate installation and quick visual inspection. Available in steel, aluminum, and stainless steel, in a variety of head styles.
|
|
|
|
|
|
Emile MAURIN, as stainless steel fasteners specialist, propose to you a wide range of products :
* Hexagonal head bolts
* Socket cap screws
* Washers (all types)
* Threaded rods (length 1, 2, 3 meters)
* Machine screws
* Tapping screws
* Self drilling screws
* Wood screws, chipboard screws
* Special parts
Our fasteners are selected in several business : food, chemistry, pharmacy, water industry, building trade, navy, ...
Our products are in different grades : A2, A4, A4-80,A4-316L and tempered stainless steel.
Passivation and decontamination can be done.
With the addition of different alloy, we can obtain the chimical and mechanical performances adapted to the use :
- heat resistance
- cold resistance
- mechanical resistance
- oxydation and corrosion resistance
The stainless is quite recyclable so without any waste, which is a real advantage, in accordance to the environment policy.
Our proposal in stainless steel products is adapted to the industry requirements.
Please contact us by phone 0825 007 333 or on www.emile-maurin.fr
|
|
Our more than 36 years’ experience on the market for stainless steel fasteners is brought to bear with particular force in this product segment.
All of the articles with relevance to fastening technology – from the traditional screws and nuts in thousands of individual models, through washers, retaining rings and keys in many versions, right up to bolts, split pins and rivets in just as many variations – can be delivered.
Both the parts standardized in accordance with DIN or ISO and the non-standardized fastening elements (e.g. chipboard screws, mushroom head screws, washers) are available.
Stainless steel remains the material of choice for most of the Lederer customers. Hardly any other material can boast its defining properties, such as corrosion resistance, long lifespan and non-magnetizability. And not least, the optical impression made by a mirror-fi nished stainless steel fastener infl uences the choice of material more often than one would suppose.
|
|
Stainless steel screws, bolts and fixing elements
Complete range in A2 and A4 stainless steel.
Machine screws, screws for sheet metal, wood-screws, self drilling, security screws, knurled screws...
Hexagon head, button head, hexagon socket, six lob, countersunk head, raised, slotted,
cross recessed "Phillips" or "Pozidriv"...
Threaded rods, with 1 meter, 2m, 3m lengt...
Plain washers, spring washers, spring lock washers...
Hexagon nuts, cap nuts, prevailing torque type, wing nuts, blind rivet nuts...
Studs, pins, blind rivets, retaining rings, threaded stirrup, hose clips...
Fixing elements for building : wedge anchor, shield anchor, screw for concrete, nylon plug, chemical capsule...
Stainless steel cables and chains, shipping accessories, turnbuckle, schakle...
Hinge rolled knuckles...
|
|
|
|
|
|
Emile MAURIN, as stainless steel fasteners specialist, propose to you a wide range of products :
* Hexagonal head bolts
* Socket cap screws
* Washers (all types)
* Threaded rods (length 1, 2, 3 meters)
* Machine screws
* Tapping screws
* Self drilling screws
* Wood screws, chipboard screws
* Special parts
Our fasteners are selected in several business : food, chemistry, pharmacy, water industry, building trade, navy, ...
Our products are in different grades : A2, A4, A4-80,A4-316L and tempered stainless steel.
Passivation and decontamination can be done.
With the addition of different alloy, we can obtain the chimical and mechanical performances adapted to the use :
- heat resistance
- cold resistance
- mechanical resistance
- oxydation and corrosion resistance
The stainless is quite recyclable so without any waste, which is a real advantage, in accordance to the environment policy.
Our proposal in stainless steel products is adapted to the industry requirements.
Please contact us by phone 0825 007 333 or on www.emile-maurin.fr
|
|
|
A2, A4 stainless steel screws, nuts, washers, nails, pins, rivets and marine hardware. Metalscrews, sheetscrews, woodscrews
|
|
Our more than 36 years’ experience on the market for stainless steel fasteners is brought to bear with particular force in this product segment.
All of the articles with relevance to fastening technology – from the traditional screws and nuts in thousands of individual models, through washers, retaining rings and keys in many versions, right up to bolts, split pins and rivets in just as many variations – can be delivered.
Both the parts standardized in accordance with DIN or ISO and the non-standardized fastening elements (e.g. chipboard screws, mushroom head screws, washers) are available.
Stainless steel remains the material of choice for most of the Lederer customers. Hardly any other material can boast its defining properties, such as corrosion resistance, long lifespan and non-magnetizability. And not least, the optical impression made by a mirror-fi nished stainless steel fastener infl uences the choice of material more often than one would suppose.
|
|
Socket head screw - metal
Group 340
# Made from stainless steel or mild steel (M4-M5)
# Finish: metal or zinc
# According to DIN912, NF E25-125, ISO 4762
Flat head machine screw - metal
Group 341
# Made from stainless steel or mild steel (M3-M5)
# Finish: metal or zinc
# According to DIN965, ISO 7046
|
|
|
Parker-Kalon® manufactures a variety of specialty screws for industrial, construction and automotive use. They offer a wide range of product for numerous applications.
|
|
|
Hexagonal, cylindrical and countersunk heads; metric and self tapping screws, socket set screws, hexagonal domed cap and flange nuts, washers, pins, threaded rods, rings, eye nuts, turnbuckles, jaws. Perfect for fixings subject to atmospheric environment, thanks to their high rust resistance. Available in stainless steel AISI 304 and 316.
|
|
Description Shoulder bolt Stainless steel Cr 17%
Reference 1031-5-6
Material Stainless steel Cr 17%
Please select one table row below:
D L (mm
M5 6
M5 8
M5 10
M5 12
M5 16
|
|
Threaded bolts to DIN 1445 are available in standard or stainless-steel versions with diameters from 8mm to 20mm.
The best example of an ideal area of application is the conveyor belt. The seat of the roller bearing is often secured with a stud bolt. There are good reasons for this. First of all a stud bolt is easy to install. It only needs to be secured on one side, for example, with a nut. Secondly it is absolutely free from twisting and in addition has smaller tolerances than its “smooth brothers“. This guarantees reliable guiding of the belts.
|
|
The CLUFIX-STUD™ insert is an ideal solution for the blind installation of studs on thin sheets or profiles.
In the same way as a rivet, CLUFIX-STUD™ allows the assembly of two or several workpieces - whilst still offering a stud function.
|
|
- TECBOLT Blind Rivet Bolt
Steel, Domehead, zincplated
- TECBOLT Blind Rivet Bolt
Stainless Steel, Domehead
|
|
The advantages of ATP as compared to
screw connections:
75 % less assembly time
No assembly errors
Not dependent upon pretension loads
Displacement-controlled pressing
Employment of favorably-priced resources and tools.
|
|
The suitable fastening element for your application
Why Arnold & Shinjo should be your choice:
- Fully automated processing of all fastening elements
- Sheet thicknesses for clinch studs from 0,75 to 5,0 mm
- All fastening elements available with the surfaces of your choice
- Customised special solutions
- For virtually all sheet qualities
|
|
Pins with levelling head
Dimensions of M2.5 with M8
Matter steel zinc coated blanc*
For thickness of sheet from 1 to 3 mm
Ensure an assembly by screwing high characteristics (forced wrenching, various loads...)
Allows very powerful fixings
Very simple installation using a press
|
|
STUDFIX™ is a stud designed to be crimped to achieve a screw function on metal sheet of any thickness.
For this type of component , crimping is carried out using a press. The groove located under the bosses receives the material of the metal sheet, which flows under the effect of the pressure exercised on the head.
STUDFIX™ thus offers high performance mechanical behaviour. Torque resistance is ensured by the anchoring of the bosses in the metal sheet, and high resistance to axial forces is guaranteed by the design of both head and groove.
|
|
Considerable clamping strength, higher than that of a class 8.8 steel screw.
Dimensions : From M3 to M8 ex-stock, other dimensions under request.
Material : Steel zinc plated, stainless steel.
|
|
JHFHB-M8-50
THREAD SIZE: M8*1.25
THREAD CODE: M8
LONG "L" :50
MIN.SHEET THICKNESS: 2
HOLE SIZE IN SHEET 0.08: 8
MaxHole In Attach.Parts: 9.5
H ±0.25: 12.5
S Max.: 3.5
T Max.: 1.78
MIN.DIST. HOLE C/L TO EDGE : 12.7
other sizes are fully available:
256, 440, 632, 832, 024, 032, 0420, 0518, 0616
M2.5, M3, M3.5, M4, M5, M6, M8, M10
JFH,JFHS,JFHA,JTFH,JTFHS,JHFH,JHFHS,JHFHB,JFH4.
Features:
1. They are applied on sheet with thickness over 0.02 inches/0.76 mm.
2. Carbon steel, stainless steel and aluminum material are available.
|
|
|
|
|
|
Substitute the length of stud required for the ?? in the part no. and the finish code for the ?? following the part no. to specify the exact part required. These fasteners are available in Carbon Steel Heat treated and Plated Zinc and Clear passivated, Code 60, or in Stainless Steel, Code SS. Code 60 products are for use in sheets of Rockwell Hardness of B - 85 max. Code SS is for use in sheets of Rockwell Hardness of B - 70 max.
CS Clinch Studs are a fast reliable method of providing captive male thread forms in thin sheet metal sections. Their ease of use makes them the preferred fastening method for all sheet metal work used in the computer, electronics, electrical and telecommunications industries. A simple squeezing action with a press and bottom die installs the fasteners into the sheet where they are retained due to the coining groove being filled with material during installation. The stud has advantages over the nut in that they provide locations upon which components can be hung during assembly, improving production times.
|
|
|
It is a quick and safe fixing system. It gives answer to assembling problems on plates, folded sheet-metals and thin walls, even when already painted. Self clinching are usually press-applied. They can be studs, nuts, stand offs or captive fasteners. They are available in steel, stainless steel and zinc plated steel.
|
|
|
|
Screws, Bolts
