|
|
|
|
|
|
The anchor range proposed by Emile MAURIN provide innovation, safety and reliability.
We provide a range of fasteners for industry and building trade.
The Emile MAURIN anchor studs set hight performances for the fixings in concrete. Our sutds in coated steel and stainless steel are used to fix life-line, consoles, machine tool, ...
We propose different embedding products adapted to the industry :
- Resin :
* The resin cartridge are used in the hollow or full material for :
- fixing of concrete irons, threaded rods, sockets
- hight resistance anchors for railway, subway applications, ...
* Chimical capsul and thread rods :
We propose 2 types of chimical products :
- a chimical bulb used with a threaded rod for full materials (stone, concrete)
- an extrusion system of chimical fixings quick and easy to be used. It is a cap gun + a pack + a mixer
* Nylon ankle :
We propose a wide range of nylon ankles, well adapted for all types of support materials, they can be used for numerous apllications (shelf, wardrobe, ceiling, electrical boxes, ...)
* Anchor bolts and expansion cartridge :
This anchor system used for heavy load can be dismantled and set a hight expansion capacity
* Striking ankle :
They are fixations with steel cartridge :
- with slot in front to allow the expansion
- the rear threading enables the mounting of a screw or a threaded rod
Please contact us by phone 0825 007 333 or on www.emile-maurin.fr
|
|
UNISORB® VECTOR® Bolts :
Made from high quality forged steel, VECTOR® Bolts have a series of angular facets which resolve vertical stress forces into a cone-shaped pressure pattern. An advantage of this unique design is the increased contact area between the bolt and the grout. The wedge shaped design on the bottom of the bolt transfers the tensile load of the stud into a lateral compressional load in the foundation, assuring maximum pull out strengths.
The increase in load transfer to the foundation results in a reduction of the embedment depth required to obtain full strength of the anchor. This reduction in required embedment depth lowers the installation cost by reducing the core drilling and grouting requirements.
VECTOR® Bolts are available in several metric diameters and lengths in a 90,000 psi minimum tensile strength material.
|
|
Whether it is a question of bolts with head or without, with one, two or more turned grooves, with or without pin hole, with or without thread - mbo has got most of them.
Of steel and stainless steel, in all sizes, immediately from stock. In particular the standardized DIN parts are available in practically all sizes from DIN 1433 to DIN 1445 and from DIN EN 22338 to DIN EN 22341. In diameters from 4 mm to 100 mm and in lengths from 20 mm to 200 mm. At mbo you can even get those DIN bolts which are no longer to be found in the official standard lists.
Special parts to customer's drawing or sample are no problem. We have been producing bolts here for 40 years. Why don't you profit from this experience?
|
|
The captive components of the CAPTIFIX™ range enable a captive screwing or indexation function on a panel-type workpiece.
The retainer, which is in permanent contact with the workpiece holds the screwing or indexing element captive.
The various shapes offered allow crimping on a variety of materials.
|
|
Product Features and Benefits
Each screw thread size dictates the total length and thread grip area of the screw, but comes with multiple standoff mounting dimensions to accommodate varying panel thicknesses.
- Large highly polished knobs present a blemish-free finish
- Elongated shafts provide for easy grip, high above panel
- All stainless steel designs provide corrosion resistance
- 53 Class includes fully-retracting spring-ejected screws
- Two methods of flare-in installation - straight hole or chamfered hole
Available Options
- Available in bright polished stainless steel or with screw and standoff in black finish
- Special installation tools are available by fastener size for flaring standoffs and affixing retainer rings
Industry Applications
- Aerospace
- Automotive, Trucks
- Computers
- Electronic Enclosures
- Exhibits/Signs
- Food Equipment
- Industrial Enclosures
- Medical
- Networking
- Telecommunications
- Vending Machines
|
|
Our more than 36 years’ experience on the market for stainless steel fasteners is brought to bear with particular force in this product segment.
All of the articles with relevance to fastening technology – from the traditional screws and nuts in thousands of individual models, through washers, retaining rings and keys in many versions, right up to bolts, split pins and rivets in just as many variations – can be delivered.
Both the parts standardized in accordance with DIN or ISO and the non-standardized fastening elements (e.g. chipboard screws, mushroom head screws, washers) are available.
Stainless steel remains the material of choice for most of the Lederer customers. Hardly any other material can boast its defining properties, such as corrosion resistance, long lifespan and non-magnetizability. And not least, the optical impression made by a mirror-fi nished stainless steel fastener infl uences the choice of material more often than one would suppose.
|
|
|
|
|
|
The Emile MAURIN company is very well organised to manage the special items.
This type of parts is 45% of our business.
A dedicated team is in charge of the special parts range, answering all customer demands :
* production feasibility
* fastener type choice
We can supply all type of fasteners according to your requirements : raw material, production process, coating, packing, ...
Please find below a view of special parts :
* Special parts :
- cold forging
- hot forging
- bar turning
- cutting
- precision fasteners
- microfasteners
* All materials :
- steel
- stainless steel
- brass
- bronze
- aluminium
- titanium
- plastic
* Finish :
- thread break
- lubrification
- colouring
* Coating :
- Electrolytic zinc :
- with CR 6 : black, green, yellow zinc
- with CR 3 : (conform ROHS directive) white zinc, nickel zinc
- zinc with hight salt test performance (from 48 to 720 hours) with or without topcoat, with different colours
- Lamellar zinc
- Hot galvanisation
- phosphate
- chromium
- nickel
- copper - tin
- coating on stainless steel : passivation, decontamination
* Specific customer specifications :
- package
- label
- AQP items
- PPM items
- control report external laboratory
- specific control documents
- safety stock
- kanban supply process
- EDI
|
|
SEB or SEB C Ring / Swivel Eye Bolt
Swivel eye bolt fitted with an automatic position recovery system for optimum orientation in the direction of the sling.
Tightening by Allen key
Permits the hook to move parallel to the supporting face of the ring being drawn at 90°
From M16 to M42 as standard; for loads from 1.6 t to 12.5 t
Other variants of fitting bolts on request
|
|
Wichard eye bolts are single-piece forged components that guarantee excellent safety standards for fastenings. The broad range of sizes enable to find the solution best suited to your needs
> 6 part numbers available
> Part#: 6490: M6 x 100
> Part# 6491: M6 x 100 (large size)
> Part#: 6492: M8 x 125
> Part#: 6493: M8 x 125 (large size)
> Part#: 6495: M10 x 150
> Part#: 6497: M10 x 150 (large size)
|
|
Product Features and Benefits :
A variety of head styles and receptacle styles makes it easy to adapt the common benefits of quick, sure fastening performance to a number of materials and mounting conditions. Choose from small, medium, and large sizes to suit working load and dimensional requirements.
- Grip tolerant design accommodates variability in material thickness
- Loosely mounted captive screw simplifies quicker, easier alignment
- Fast-pitch threads deliver quicker access, greater pull-up, with less turning effort
- Variable tightening force is controlled by end user
- High-strength construction
- Corrosion-resistant materials
Available Options
- Screw finishes include hardened carbon steel with zinc chromate plus sealer, and 300 series stainless steel
- Retainers include nylon for general use, and stainless steel for outdoor applications
- A variety of retainer installation tools is available to match the appropriate sizes and styles of fast-lead captive screw retainers
|
|
• Huck C50L
-8.8 grade large diameter Lockbolt
-Made to British Standard B7805: Part 2: 1997 - a mark of quality, safety and performance
-High tensile friction grip fastener
-Thread head variety available for rail track applications
-Pin head style – Round, truss, countersunk, thread head
-Collar style - Standard, flanged, low profile
-Materials - Steel, stainless steel, aluminium
-Diameters – 12.7, 15.9, 19.1, 22.2, 25.4, 28.6, 31.8, 34.9 mm
|
|
C120L®
8.8 grade two-piece lockbolt fastener
High tensile strength and vibration resistant
Standard 6 locking grooves offering wider grip range than most competitor fasteners
|
|
LOCKFIX™ is a fastener component dedicated to structural assembly applications which are subject to very significant mechanical stress .
LOCKFIX™ fasteners consist of a pin and a collar. After riveting, these two elements guarantee high mechanical resistance.
|
|
High strength, vibration resistant lockbolts with high, controlled clamp.
Key features and benefits
High strength, high speed assembly
High shear and tensile strength
Excellent vibration resistance
Consistent, high performance
Large diameter option from 13mm to 25mm (1/2" to 1") with tensile strength of over 300kN for heavy engineering applications
TIR approved - easy to inspect for tampering
Robust and rugged installation tools
Assembly materials
Avdelok® can be used to fasten:
Metal to metal
Assembly applications
Automotive
Building and construction
Bridge building
Cabinets and enclosures
Commercial vehicle bodies
Fencing
Mining
Railways
Reefer cool and dry freight containers
|
|
|
Blind bolts are a rapid fixing system for assemblings that require high mechanical strength or that are subject to high vibrations. This system is composed of a bolt and a collar. Fixing takes place when collar spread itself on bolt’s lock rifling. They are realized in several lengths and diameters, on the basis of the grip range; in steel and aluminium.
|
|
Large diameter Avdelok® lockbolts are heavy duty, two piece fasteners designed to provide exceptional high strength, secure assembly. Quick and simple to place yet lasting for years, they are the ideal solution where spot welding is not practical or possible.
Key features and benefits
Exceptional shear and tensile strength
High speed assembly
Consistent, high performance
Robust and rugged tools
Excellent vibration resistance
Ease of inspection
Tamper resistant
TIR approved
Assembly applications
Transportation (Heavy Vehicles)
Railcars
Construction (Bridge Building, Renewable Energy Farms)
Heavy Equipment
Containers
|
|
Sammy(R) Screw benefits:
- Installs in less than half the time of drop-in anchors
- Single piece design, no nut and washer to assemble
- Suitable for concrete, steel and wood based materials
- Concrete installation requires smaller diameter drill bits than traditional drop-in anchors
- FM and/or UL approved
- Easily removable/replaceable
- Close to edge fixing giving high performance values
- Can be fixed closer together than traditional anchors without reducing performance values
- Self tapping in concrete and cuts its own thread in wood and steel
- Low cost condrive kits allow fast installation
- Allows vertical and horizontal installation in hard to reach locations
- Premium corrosion protection
- Shallow embedment gives flexibility in steel, concrete and wood.
|
|
|
|
|
|
Substitute the drive code for the ? and the length for the L In the part no. to specify the exact part required.
The 30 deg. Flank angle and recessed core diameter of these thread forming screws for light alloys and highly filled plastics provides optimum performance. The large difference between the drive in torque and ultimate stripping torque is achieved due to the narrow 30 degree flank angle of the thread. The screw does not require high drive in torque as it displaces only half the material of a conventional screw form. The greater penetration achieved by the low profile flank form ensures a greater surface area contact with the material therefore increasing frictional retention which directly results in high stripping and break-loose torque values. The additional space provided by the recessed core eliminates galling during thread forming. Elimination of thread cutting means a chipless assembly, there is no need for cleaning the threads. A high repeatability is guaranteed as the conical blunt point provides optimum start location for thread forming and preliminary location prior to thread engagement on restarts, therefore eliminating cross threading.
|
|
Huck BobTail®
The BobTail is the next step in lockbolt evolution.
1)No pin-tail or pin-break
❚ Reduced material wastage
❚ Low installation noise
❚ Increased corrosion resistance
2)Newly designed, compact, semi-automatic tooling
❚ Fastener installs in only 2 seconds, up to twice as fast
as any other large diameter LockBolt on the market
❚ Consistent, high quality installation - 25 years experience or a
novice makes no difference to the quality of the installation
❚ Smooth, shock free installation sequence – eliminates jolts to
the operators arms and hands
|
|
|
A full range of plastic screws with a good resistance to liquids , in a wide range of colours.
|
|
Please use the link to check our full range of Screws,Bolts & Threaded Rod.
We can also custom mould if you require a special size or configuration.
|
|
Transparent screw
Group 170
# Made of polycarbonate (PC)
# Colour: natural
# High transparency
Transparent screw
Group 170-2
# Made of polycarbonate (PC)
# Colour: natural
# High transparency
|
|
|
Plastic screws suit all the applications excluding the use of metal, they are perfect perfect for those applications in which electric conduction and corrosion must be avoided and, on the contrary, high vibration resistance must be granted. Screws, washers, threaded rods, stand offs and socket set screws are available in this material.
|
|
Wing screws / nuts
Four-stars screws / nuts
Knurled thumb screws,
Knurled nuts...
Hex cap nuts...
Material : Head black nylon, Insert zinc-plated steel.
|
|
ARNOLD Fastener Express finds its basis in the thinking behind Rapid Prototyping. The Functional Prototyping service model adapted by ARNOLD makes it possible to reduce development and production times by up to 75 per cent – with no detrimental effect on quality. With Fastener Express ARNOLD is in a position to manufacture and supply customised complex fasteners within three weeks.
by minimising administration work
by feeding the incoming order straight to technical assessment
by simultaneously translating the three-dimensional CAD data into the product
machining replaces tool design and procurement
|
|
- SPACER MALE / FEMALE WITH UNDERCUT
- COUPLING NUTS ROUND OR HEXAGONAL
- REDUCING NUTS M / F and F / F sample : M8/M10
- THREADED RODS DIN976-A
- DOWEL SCREWS WOOD / METRIC THREAD
- PLASTIC SCREWS and ACCESSORIES
- STAINLESS STEEL SCREWS and ACCESSORIES
|
|
All lengths are available from M42 up to Lg 400, M48 up to Lg 300.
Fully threaded screws in stock.
Delivery: standard or retail packaging.
Non-tariff, non-standard, non-standard threaded LG, fine pitches: ASK US.
Large quantities: prices according specialised solutions
|
|
|
|
|
|
The brand name M'DIRECT has been created by the firm EMILE MAURIN - Fasteners Department, in order to meet the needs of the industry maintenance services and the artisans, small users of fasteners.
The M'DIRECT range is done with fasteners packed in good quality cardboard boxes, with a practical pourrer, usable several times.
The fasteners standards coating and dimensions are mentioned on the labels, as well as the batch number for the tracability.
On the right side is the bar code, useful for the purchase, reception and sales.
The labels are also self-adhesive and can be used for resetting the orders or identifying storage areas.
100% of M'DIRECT items range are available and can be delivered in 24 hours working day in all France.
* Steel and stainless steel hexagonal head screws
* Steel and stainless steel socket cap screws
* Steel and stainless steel washers and serrated lock washers
* Steel machine screws
* Steel tapping screws
* Nylon plug
* Steel and stainless steel threaded bars
* Box of spring pins
* Box of retaining rings (shaft and bore)
* Box of blind nuts
* Box of threaded insert for maintenance
The M'DIRECT range make easier your fasteners purchase.
|
|
|
|
|
|
100 Deg Flat Machine Screws
82 Deg Flat Machine Screws
82 Deg Oval Machine Screws
Comb Drive Binder Head Screw
Economy Grade Thumb Screws
Fillister Phillips Machine Screw
Flat-Head Wing Screws
Hex Bolts
Hex Head Machine Screws
Hex Socket Cap Mach. Screws
Knurled Head Thumb Screws
License Plate Fasteners
Metal Core
Metric Econ Gde Thumb Screw
Metric Fill Phillips Mach Scr
Metric Hex Machine Screws
Metric Hex Socket Cap Screws
Metric Nylon Threaded Rod
Metric Phil Flat Mach Screw
Metric Phil Oval Mach Screw
Metric Slotted Grub Screws
Metric Slt Flat Mach Screw
Metric Slt Oval Machine Screw
Metric Slt. Hex Mach Screw
Oval Thumb Screws
Pan Phil Metric Mach Screw
Pan Slt Metric Machine Screw
Phillips Pan in Polycarb. Mat
Polycarb Slt Fill Mach Scr
Round Slotted Machine Screws
Slotted Binder Machine Screws
Slotted Fillister Mach Screw
Slotted Grub Machine Screws
Slotted Hex Bolt
Slotted Hex in Polycarb. Mat
Slotted Hex Machine Screws
Slotted Pan in Polycarb. Mat
Slotted Set Machine Screws
Slotted Washer Hex Bolt
Slt Cheese Metric Mach Screw
Slt Fillister Metric Mach. Screw
Slt Pan Machine Screws
Socket Set Machine Screws
Square Base with Threaded Stud
Threaded Rod
Threaded Studs
|
|
|
|
Screws, Bolts
