Continuous furnaces

78 companies | 403 products
Filters
metal frame furnace / laboratory - +100 °C ... +700 °C | Lindberg/Blue M series

The Thermo Scientific* Lindberg/Blue M Tube Furnaces are used for Pyrolisis, thermal expansion, calibration, and sintering...

{{productDetail[21327]}}
horizontal tube furnace / laboratory - 1 000 - 1 200 °C | MTF, CTF, GHA series

The Tube Furnace can be utilized in testing temperature sensors. This includes PT100's and thermocouples. Assessing electronic components and semiconductor materials is also made attainable through...

vertical furnace / metal frame / laboratory - max. 1200°C | GVA series

The GVA Series, manufactured by Carbolite, is a laboratory vertical tube furnace which has a simple and economical design. It has an integral wirewound work tube and a control module with furnace...

rotary tube furnace / laboratory - 1200 - 1600°C

1200°C, 1500°C & 1600°C Rotating (rotary) tube furnaces:
1200°C Rotating (rotary) tube furnaces:
- Maximum operating temperature of 1200°C
- Based on tube diameters of 50, 75 and 100mm
- Heated lengths of 700, 900 & 1090mm
- These models utilise a resistance wire heating element wound around a ceramic worktube, with a rotating worktube...

tubular furnace / high vacuum / laboratory - max. 1200°C | HVTT, HVT

Maximum operating temperature 1200°C
For horizontal use only
Offers vacuum levels of better than 10-5mbar with a clean empty worktube
Vacuum system options include either turbo-molecular...

tubular furnace / high vacuum / laboratory - max. 1500°C | HVTT, HVT

1500°C Vacuum tube furnace (HVT)/
- Maximum operating temperature 1500°C
- For horizontal use only
- Offers vacuum levels of better than 10-5 mbar with a clean empty worktube; turbomolecular high vacuum pump systems are available
- High vacuum...

{{productDetail[28278]}}
reverse thrust furnace - 800 °C

The unit is manufactured by Ruhstrat GmbH, and is a pusher-type furnace plant that is ideal for use in the chemical industry. The unit is heated electrically, and has the capacity to process...

furnace with rollers - 950 °C

Rationale:

The plate roller hearth furnace is utilized for thermal management of steel sheet plates for the automotive industry. These plates endure a thermal twist in a linked press.

These warmly shaped protection...

carbon regeneration furnace - max. 2 600 °C

New Capacities in the Production
THROUGH HEAT TREATMENT PLANTS FOR CARBON PARTS

With the development on the energy sector the importance of the material carbon fibers increases. Due to the fact that carbon fibers are very light, they are among others increasingly used for the aircraft construction in...

metal frame furnace / laboratory - 1 050 ° C, 45 kW

The Electrical Heated Hinged-Tube Furnace is ideally designed to provide an excellent quality performance for very specific purposes. It is mainly used for the thermal treatment of powdery or grainy materials...

rotating furnace - 1 000 °C

APPLICATION

The electrical heated rotary drum furnace is used for direct-reduction disintegration analysis according to ISO 11257 and the low temperature disintegration analysis according to ISO 13930 of iron ores.

DESCRIPTION OF EQUIPMENT

This dynamic reduction test apparatus consists, according to the ISO-specifiactions 11257, of the hinged...

{{productDetail[17003]}}
metal frame furnace / laboratory - 1 000 - 1 200 °C |  MTF/CTF

Horiba offers a wide variety of Joule-heating horizontal tube furnaces capable of rapidly achieving a temperature of 1000–1200°C,. It can also be mounted vertically with a separate control...

{{productDetail[25366]}}
rotary hearth furnace - 8 000 kg/h, 1 300 °C

Rotary hearth furnace for forging.

Chamber dimension:

External...

rotary hearth furnace - 2 000 kg/h, 1 300 °C

Production: from 500 to 3000 kg/hr
Type of work pieces: flats and rounds
Operating temperature: 1000 – 1150 °C
Driving...

rotary hearth furnace - 2 000 kg/h, 1 300 °C

Automatic austenitisation line consisting of:

2 X austenitisation furnaces
1...

rotary hearth furnace - 2 000 kg/h, 1 300 °C

The Belt conveyor furnace is manufactured by Gadda Industrie...

{{productDetail[50762]}}
rotary hearth furnace - 2 000 kg/h, 1 300 °C

The SOLO® Conveyor Belt Furnace is designed with a clean surface without any marks of oxidation. It performs...

rotary hearth furnace - 2 000 kg/h, 1 300 °C

Conveyor belt furnace

Treatments
Tempering - Brazing - Brazing of precious metals or stainless steel - Annealing - Hardening of stainless steel with 13% of chromium - Overhardening - Sintering...

rotary hearth furnace - 2 000 kg/h, 1 300 °C

Technical data :
• Treatments: tempering, annealing, brazing, brazing of precious metals, hardening of stainless steel with 13% of chromium, overhardening, sintering, recrystallization.
•...

rotary hearth furnace - 2 000 kg/h, 1 300 °C

Continuous Furnaces with Online Quenching

Highly-focused heat treatment for guaranteed quality thanks to processes performed...

rotary hearth furnace - 2 000 kg/h, 1 300 °C

Belt conveyor hardening furnaces for stainless steel

Technical data
Max. working temperature: 1150°C
Effective working zone: width 300 mm x height 30 mm x length 2000 mm
Power...

{{productDetail[27674]}}
metal frame furnace / laboratory - 1200°C | TU 1200

· Definition : electric tube furnace, for all applications.
· Construction : robust construction of bent plate.
· Insulation : multilayer insulation. Refractory...

metal frame furnace / laboratory - 1100°C | TO

Definition: Opening electric tube furnace for all applications.
Construction: Robust construction of bent plate.
Insulation: Multilayer insulation....

metal frame furnace / laboratory - TU 1400

The TU 1400 Model, manufactured by Borel, is a laboratory tube furnace with a durable...

metal frame furnace / laboratory - TU 1500

Tubular electrical furnace facilitates all applications. It has robust construction of the bent plate.
Interior is made in refractory bricks &...

metal frame furnace - TU 1600

The TU 1600 is manufactured by Borel Switzerland. It is a tubular electric furnace,...

{{productDetail[18259]}}
rotary tube furnace / laboratory - max. 4.8 kW, 2.45 GHz | MDRT

The MDRT from Linn High Therm is a microwave rotary tube furnace with microwave...

belt conveyor furnace / microwave - 6 - 100 kW | MDBT series

Fast continuous drying and heating for industrial applications. Applications in ceramic, foundries, building materials, chemical,...

belt conveyor furnace / microwave - 8 kW | MDBT 8 600/600/2310

The MDBT 8 600/600/2310 models are manufactured by Linn High Therm. These are belt conveyor...

belt conveyor furnace / microwave - 8 kW | MDBT 8 120/270/1650

The MDBT 8 120/270/1650 models are manufactured by Linn High Therm. These belt conveyor...

metal frame furnace / laboratory - max. 1700 °C, ø 34 mm | ADAM

The ADAM Series, manufactured by Linn High Therm, is a mini high temperature tube furnace...

{{productDetail[16483]}}
metal frame furnace / laboratory - +1 250 °C ... +1 700 °C | TH series

Our tube furnaces are provided with:

Separated electrical cabinet
Eurotherm controller
Ceramic thermocouples (K,S,B) according to temperature
...

vertical furnace / metal frame / laboratory - +1 250 °C ... +1 750 °C | TV series

The TV series is a laboratory vertical tube furnace developed by Pyrx Thermique Materiaux. It is built with separated...

{{productDetail[4804]}}
paternoster furnace - GMT

GMT semifinished parts require optimum heating that does not cause undue material degradation. Dieffenbacher uses a particularly...

{{productDetail[70088]}}
paternoster furnace - GMT

Continuous annealing facilities for uncoated and coated steel strip
FLEXIBILITY AND INNOVATIVE SOLUTIONS FOR GALVANIZING, GALVANNEALING AND TINPLATING USING CONTINUOUS STRIP ANNEALING LINES.

The...

annealing line continuous / for steel strip - max. 1 180 °C | HICON/H2®

HICON/H2® bright-annealing lines for unalloyed to high-alloyed steel strip and special grades

Highest quality, greatest efficiency and best performance for STAINLESS STEEL STRIP.

These factors define our bright annealing...

hardening line - HICON®

HICON® heat treatment facilities for hardening and tempering strip

EBNER's innovative and future-safe developments in continuous hardening and tempering technology are recognized worldwide and set new standards in maximizing product quality and cost effectiveness while minimizing environmental...

furnace with rollers - +400 °C ... +1 050 °C

Roller-hearth furnaces for long products

This type of furnace was specially developed for soft annealing to achieve globular cementite in medium and high-alloyed tool steels, high speed steels, cold heading and bearing steels.

As well as taking...

reverse thrust furnace - HICON®

EBNER HICON® pusher-type furnaces are the most modern available for reheating and homogenizing aluminum ingots for hot rolling. In contrast to conventional furnaces (such as soaking pits) the HICON® pusher-type furnace is a...

{{productDetail[21815]}}
belt conveyor furnace / controlled atmosphere - EASYSHAKE

Rotary retort furnace under protective atmosphere with sealed rotating ...

rotary retort furnace - EASYDRUM

Continuous furnace with conveyor belt under controlled atmosphere...

belt conveyor furnace / for brazing / annealing - EASYTOOL

Continuous furnace with conveyor belt under controlled atmosphere with...

belt conveyor furnace / for brazing / annealing - EASYBRAZE 27

flat or humped back configuration, allowing to strongly...

belt conveyor furnace / laboratory sintering - EASYBRAZE

Conveyor belt sintering furnace under controlled atmosphere with...

{{productDetail[8795]}}
walking beam furnace / reheating - Stein Digit@l Furnace® AT 2.0

Best value on the market
The Stein Digit@l Furnace® Technology and in particular the new generation Stein Digit@l Furnace® AT 2.0, is the best value for your money available on the market, when taking into account initial...

furnace with rollers - WHF

Walking hearth furnaces are perfect for heating small cross section billets. It's a flexible alternative to pusher furnaces and...

reverse thrust furnace - PF

State-of-the-art solution for heating products
This furnace type is a conventional solution for heating products. Its main characteristic is the way how the transfer of products is done through the combustion chamber by means...

furnace with rollers - 50 - 100 mm

These roller hearth furnaces (Stein HeaTreat RollH range) are used for normalising and for the different annealing treatments of bars, tubes, plates...

rotary hearth furnace - RtH

These rotary hearth furnaces (Stein HeaTreat RtH range) are used for reheating of round billets...

{{productDetail[62063]}}
belt conveyor furnace - max. 593 °C

The horizontal solution heat treat furnace is used for heat treating smaller components and provides many of the features of more expensive drop bottom type furnaces.

Installation...

belt conveyor furnace - max. 260 °C | HEPA

This vertical down airflow, HEPA (High Efficiency Particulate Air) filtered, conveyor oven utilizes a...

belt conveyor furnace - +260 °C ... +538 °C | PC series

Despatch PC Series Conveyor Ovens are designed for process versatility and reliability. They achieve superior temperature uniformity in all interior...

drying furnace / curing  - max. 1 000 °C | CF series

Despatch CF Series metallization furnaces are designed for high throughput, ease of maintenance and consistent process repeatability ensuring consistently high yields and superior product quality.

The furnace now has greater thermal process control that compensates...

drying furnace / curing  / metallization - CF series

For highly efficient solar cells at the lowest possible cost, more solar manufacturers choose Despatch Firing Furnaces than any other brand.Combining...

{{productDetail[19331]}}
drying furnace / curing  / metallization - CF series


An equipment that makes appropriate conditions in the rolling process through reheating...

belt conveyor furnace / annealing - BATCH-RAL


An equipment for annealing(SA, FA, LA) of CHQ(Cold Heading Quality)wire for...

belt conveyor furnace / annealing - RAL


An equipment for annealing(SA, FA, LA) of CHQ(Cold Heading Quality)wire...

belt conveyor furnace / annealing - RAL

Quenching & Tempering Furnace
...

belt conveyor furnace / annealing - RAL

CCF(Continuous Carburizing Furnace)
Continuous heat treatment equipment for improving in abrasion and strength by carburizing / carbonitriding...

{{productDetail[19320]}}
belt conveyor furnace / annealing - RAL

Eisenmann has experience with all established kiln and furnace types. From the chamber kiln to the gas-tight roller-type kiln with vacuum gate, we are proficient in the entire range of kiln systems. Our engineers understand the advantages...

{{productDetail[30182]}}
belt conveyor furnace / annealing - RAL



The FCB Kiln can be supplied with 2 or 3 supports, with a girth gear or a friction drive. The efficiency of the FCB Kiln is improved by the tyres design and the upstream & downstream seals.

The...

{{productDetail[62064]}}
belt conveyor furnace - max. 1 000 °C

Continuous furnaces are the right choice for processes with fixed cycle times such as drying or pre-heating, curing or degassing, etc.. The furnaces...

metal frame furnace / laboratory - RD series

The RD product line furnaces convince with their unbeatable price-performance ratio, very compact outer dimensions and their low weight. These all-rounders are...

metal frame furnace / laboratory - max. 1 300 °C | R series

These compact tabletop tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of...

metal frame furnace / laboratory - +1 100 °C ... +1 500 °C | RT series

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and...

metal frame furnace / laboratory - 1 500 °C | RHTC series

These compact tube furnaces with SiC rod heating and integrated switchgear and controller can be used universally for many processes. With an easy to replace working tube as well as additional standard equipment options, these furnaces...

{{productDetail[16539]}}
rotating furnace - 3-Base

Since the 1800s, FLSmidth has been continually...

rotating furnace - 3-Base

With over 80 years of experience and close to 1,000 installations, FLSmidth is the world’s leading supplier of rotary kilns and dryers to the minerals industry. We supply rotary kilns and dryers for processing alumina, bauxite, copper concentrate,...

carbon regeneration furnace - 1/2 t/h

FLSmidth designs and manufactures Summit Valley Carbon Regeneration kilns, with capacities of 1/2 tonne per day and larger. Our kilns can...

{{productDetail[62016]}}
continuous furnace / for aluminum disc preheating - max. +500 °C



In the molten aluminium area, it is highly important to ensure that no moisture will come into contact with metal. Such requirements have lead to increased demands for the supply...

reheating furnace / slab - max. +540 °C

Fives proposes flexible slab reheating furnaces which can operate either in continuous,...

{{productDetail[62067]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation