|
|
This is a screw jack for manual operational use that is highly efficient and has a self-lock function.
* Standard Capacity: 10~300kN
* It has been constructed with a high accuracy bevel gear and a trapezoidal-shaped screw axis. Can be self-locked at any position during a stroke
* Long-life is maintained with the smooth movement by lubricating the reduction gear's mechanism section with grease
* Low handle-turning speed for the required stroke operation.
|
|
Joyce/Dayton - Established 1873
Joyce Bevel Gear screw jacks offer higher efficiency and greater speed than other mechanical screw jacks. At the same time, Bevel Gear S Series jacks still provide the benefit of a self-locking screw-no special brake is required to prevent the jack from lowering under load. Spiral bevel gears increase strength for higher capacities.
Bevel Gear screw jacks also act as a miter gear box, making them an ideal choice for many multi-jack systems. As many as three output shafts may be specified for mounting motors, limit switches, readout devices and other accessories.
Bevel Gear screw jacks are also available complete with reducer or direct drive in a ready-to-run package.
Joyce bevel gear jacks come in translating screw (shown) and rotating screw (keyed for traveling nut) designs. Jacks are available with one of four standard screw ends or special ends to meet your requirements.
|
|
Carrying capacity 2000 kg.
This Cable Jack is suitable for cable drum diameters of 400- 2000 mm and a drum width of 1400 mm.
By means of 3 supporting wheels which are height adjustable by hand cranks the device can be easily moved without drum.
|
|
Widely used in bridge, tank and structural steel work, ship building and other industry where powerful, all-position mechanical jacks are required.
|
|
|
Car body hoist, admissible load 8 t / 7 t (BGV D8) and car body jack, admissible load 8 t / 5 t (VBG 14) for workshops: - low speed and high speed gear for quick and easy lifting - self-locking spindle for highest security - double safety nut (VBG 14) allows working under jacked-up load - big and solid ground plate for safe standing - adjustable claws (4 postions) for time saving height adjustment - rubber tyres for quick and easy use
|
|
ECO-Jack® XR-Series - with integrated pull back system for external pumps
Unlike the ECO-Jack ® S-Series an external pump is required to operate the ECO-Jack ® XR-Series which are equipped with an integrated pull back system.
This easens and speeds up the lifting process, particularly when using more than one jack simultaneously, or when used in confined work areas. Due to its compact
design (without a pump) its weight could be reduced up to 30% and is therefore very easy to handle even in the most extreme circumstances. It is possible for
one person to operate and control several ECO-Jack ® XR-Series simultaneously when used in conjunction with a mechanical or electrical external pump. The ECO-Jack ® XR-Series is supplied with an integrated pull back system, and is operated with 700 bar technology.
|
|
Conforms to ANSI/ASME safety standard / CE/GS safety stardard
- Versatile jacks can be used vertically (not upside down )or at any angle to not more than 5 degrees from vertical poition.
- Can also be used horizontally or vertically in appropriately designed fixtures.
- Machined and polished cylinder walls ensure straight lifts,preventing uneven wear.
- Heat treated adjustable extension screw with cleaned lift saddle prevents slippage.
- Bottle jacks with lifting capacity of 12 tons and over have carrying handle for convenient moving of positioning.
- Patented bypass mechanism protects hydraulic cylinder from overpumped .Durable baked blue enamel finish.
|
|
H - Bottle jacks
NIKE's range of bottle jacks is made up of a wide selection of standard models, including extended (H80-300) and extra low variants (HxxxL- models) and special jacks for a variety of different applications.
All NIKE bottle jacks have a safety valve that prevents overloading. Bottle jacks are easy to service, and all wear components are easily replaceable.
H-series
• Low manual pumping force facilitates use in uncomfortable positions.
• Release valve permits safe, easy and precise control over rate of lowering.
• Filter in oil reservoir protects against contamination.
82HD / 86HD jacks
• Two-stage operation in order to reach the lifting point fast.
• Can be equipped with pressure gauge.
|
|
• Low handle effort
• Automatic bypass port to prevent over-extension
• Wiper seal for extended life
• Chrome plating on both plungers
• Safety relief valve to prevent overload
• Fully serviceable
• Cast pump linkage
• Cast beam
• Handle included on all mod
|
|
for heavy loads up to 30 tons!
GKS-hydr. jacks for professional applications - worldwide approved and robust design.
- Prominent features like high-quality material, safty valve ('overload protection'), wast-wax cast safety toe, quick release connector for external pump and stable swivel feet incl. solid rubber tires.
- Our hydraulic jacks approved from a German technical inspection authority and bear German test mark ‚CE'/'GS' and American ‚ANSI/ASME'.
- Every single jacks passes through a sequences of tests before it is delivered and it is supplied with a test report and label indicating the date for its next GKS-inspection.
|
|
Toe Jacks
• With lifting points on the toe and on the top, these extremely rugged jacks are ideal for machine lifting, rigging, lift truck service and much more.
• Choose from 5.5-ton, 11-ton, and now, an amazing 27.5- ton lifting capacity.
• All jacks operate both vertically and horizontally.
• Base, toe and pumping assembly swivel independently, allowing the jack to work in confined areas.
|
|
All purpose self contained jacks that are ideal for use in general industrial applications. Used extensively in maintenance, construction and material handling applications.
|
|
Patented Lifting claw
This new user friendly design, one hand lifting claw - ensures safe lifting of heavy goods. The positional height of the lifting claw can be adjusted easily with one hand without the need to locate through awkward angles.
Weight - Capacity ratio
Due to the improved design and the use of high quality material, the weight to lifting capacity ratio was significantly reduced by up to 20% comparing to other available jacks.
Precision guides
The combination of high resistant and high quality materials together with precision milled guides, guarantees a precise lifting and lowering motion, thus ensuring a long product life.
Release valve
A hand operated valve has been integrated in the hydraulic unit allowing easy and precise control of the ECO-Jack® during the lowering process
Hydraulic unit
Never before has handling been so flexible. The 225° rotating pump together with the side mounted grab handles allows a pump stroke of 100% from any position and an easy positioning of the jack.
Strong swivelling legs
The swivelling legs ensure a safe lifting process and prevent the jack from tipping over.
External hose coupler
A drip free male hose coupler enables the user to attach an external hand or electric hydraulic pump (see page 9). This facility is fitted as standard on EJ100 and above.
|
|
HU-LIFT hydraulic jacks for repairs,maintenance and installation of heavy machines.
* Compact and stable constructions.
* Can be used in any position.
* Housing revolves 360 degrees.
* Lowering speed can be accurately adjusted.
* Protected against overloading.
* Pump lever is removable.
* According to CE and US standard USA ASME/ANSI B 30/1.1986
|
|
Advantages in detail
- Reduced friction by use of slide shoes, mobile in their seats. In every situation a bigger surface for force distribution is guaranteed, less friction, power loss and wear than with conventional jacks.
- Reduced maintenance costs by easy to change slide shoes and exchangeable pumpunit.
Extremely light weight with high performance through the use of high-quality material and innovative design changes.
- Continual adjustment to the load by swivelling safety toe. Secure stableness in every situation even in lifted position.
|
|
An exclusive design, which utilises 25 compact and functional models, is the response to the continuous evolution in transport vehicles.
Extensions are built with high quality steel, with chromium coating on the external sliding parts, while the pneumatic parts are treated with an anti-corrosion process.
The hydraulic circuit built with holes inside the cylinder structure guarantees a perfect seal against accidental oil leaks. The rod scrapers prevent dust or other foreign matter from penetrating. The built-in safety valves avoid accidental overloads and prevent the load tram dropping during a pneumatic pressure loss.
Drive and pneumatic vacuum descent with double control on the handle.
The special design of the frame makes it easy to position the jack while the total tilting of the handle on the frame greatly reduces the packing dimensions thus offering savings in terms of transport and storage.
|
|
Machine lifter 5 and 10 tons
Machine lifter, hydraulic, for lifting of machines and other heavy loads. Easy lifting with lifting claw and end plate by_means of installed hydraulic hand pump. Precise lowering via lowering valve, overload valve. Pump lever detachable. Swivelling of housing by 360°, variable range of application. Sturdy compact steel construction, coating blue RAL 5007.
Guarantee: 2 years
|
|
|
the jah range of lightweigh aluminium jacks offers a wide of capacities and lift height options. Available as either plain ram lifting jacks, with or without "failsafe" mechanical lock ring, or optional low height claw lifting design. All models are constructed predominantly of leightweight aluminium alloy with all critical functioning parts manufactured from high quality steel. Used extensively in maintenance, construction, hjeavy plant an machinery applications, these high quality jacks are the proven industry standard.
|
|
for heavy loads up to 5 tonnes!
Special development for maintenance and repair work using forklift trucks or other industrial vehicles with large ground clearance and for textile
machinery or similar equipment:
- stable design
- outstanding stability
- rust free materials for the hydraulic components
The device has a stable base plate with integrated feet, which ensure that it has ideal stability. The 120 mm long toe is equipped with a gearing in its forward section, which serves to counteract any slipping of the load.
It can be set to three different height positions, so that it can also be used with fork-lift trucks with large ground clearance.
|
|
ECO-Jack® G-Series - low height lifting claw - for all fork lift trucks
This compact built ECO-Jack® G-Series with its integrated hydraulic pump elimenates the need for additional hoses or pumps. Its low profile lifting toe is also perfect on all types of fork lift, electric hand trucks and stackers with low ground clearance.
|
|
The Lowest Power Lifter!
• Extremely low height for use in confined areas
• Safety lock nut for mechanical load holding
• Single-acting, load return
• Optional special synthetic coating for improved corrosion
resistance and lower friction for smoother operation to
withstand side load forces up to 3% of rated cylinder
capacity without scoring
• Overflow port functions as a stroke limiter
• CR-400 coupler and dust cap included on all models
|
|
Low profile CYLINDERS RLS SERIES
• Cylinder body, piston and gland nut “Power Tech” treated for corrosion and abrasion resistance.
• Standard domed piston rod (5-30 ton) or swivel cap (50-150 ton) minimize effects of off-center loading.
• Unique heavy duty spring provides fast piston return.
• A 9796 3/8" NPTF female half coupler is standard with each cylinder (the RLS50 has a 3/8" coupler which is not angled). Oil ports are 3/8" NPTF (except the RLS50).
• Couplers on all cylinders, except RLS50, are angled upward for extra clearance.
|
|
GH - Low profile trolley jacks
Reliability. All NIKE trolley jacks feature modern design and are designed to incorporate large safety margins. A safety valve on all models protects against overloading.
Service. Easily replaceable components make NIKE trolley jacks simple to service. We have a large network of dealers and service agents around the world.
GH - models
• High-lift design for good accessibility.
• Protector, top saddle protection for safer lifting.
• Polyamid wheels - for quieter positioning.
GHP2 - can be operated manually or using compressed air (0,8 - 1,4 MPa)
|
|
|
Holmatro's mechanical jacks are used worldwide for heavy lifting applications. Capacities from 10 to 100 tons. Very robust tool with a self-locking device for extra safety.
|
|
|
Power Jacks range of mechanical jacks, rail jacks, hydraulic jacks, winches and hydraulic cylinders are ideal for a wide variety of material handling applications covering most industry sectors.
|
|
To Secure Loads Mechanically!
• Single-acting, load return
• Safety Lock Nut for mechanical load holding
• Special synthetic coating for improved corrosion
resistance and lower friction for smoother operation
• Withstands sideload forces up to 5% of rated cylinder
capacity without scoring
• Overflow port functions as a stroke limiter
• Interchangeable, hardened grooved saddles are standard
• Plunger wiper reduces contamination, extending
cylinder life
|
|
|
Rack & pinion jacks load 1,5 t to 10 t (fig.) withself-locking security crank, keeps the charge in every required position - for pulling or pushings. Special versions on request: - different length of rack - different lift - drive shaft to connect several jacks - with internal brake and removable crank
|
|
The steel jack is standard equipment for tool and machinery shops, contractors, shipyards, agriculture and workshops:
our steel jack with fixed lifting claw can be delivered with different types of hand crank for lifting the jack shaft along the rack. It offers a very long service life due to its high quality spur gear, precise worked crank gear as well as additional worked pawl.
|
|
Rack & pinion jacks load 0,5 t and 1 t, with self-locking worm gear for lifting, for lowering, adjusting and fixing of mechanical components, devices, machines, etc.. 0,5 t version also available in stainless steel
robust version with milled rack and hardened driving parts, for in- and outdoor applications
Special versions against additional charge:
- an other lift or length
- an other crank version
- an other fixing possibility
- an other surface treatment
|
|
|
Power Jacks have been manufacturing rail jacks for over 70 years at their Fraserburgh site for track lifting, surfacing, lining and many other lifting procedures. The range comprises of mechanical, hydraulic and air powered units. The lifting capacity of the range starts at 7.5 Ton and goes up to 200 Tons. Models are manufactured in a variety of materials including aluminium for easy handling.
|
|
|
|
Jacks, Hydraulic jacks
