|
|
Carriage platform motorized
Technical specifications
General
Dimensions: 1240x790mm
Load capacity: 300Kg
Dimension of the wheels: 200mm (8")
Height of the plate: 290mm
Height of the file: 1040mm
Tare weight: 77,3Kg
Speed:
2 X 300Watt (maximum loading 2 X 600Watt)
24 Volts
maximum capacity 25A
rated capacity 12A
Maximum speed 6km/h
Equipped with two electromechanical brakes
Battery:
2x 12Volts 24Ah
Weight 8,92kg. by Part.
Input 220V 50-60Hz
Range METAL NG
Wheels not staining.
Hinges of protection for the fingers
and of the system of folding of the file
Completion painting with double-layer.
File great height.
Low resistance to starting.
Quiet wheels.
Roll of the dice of great quality.
Anti carpet skidding
avoid shocks not staining.
11456
Order:
Electronic Joystick of precision stepless
27/44 |
|
The MOTO-CART is a battery operated self-propelled electric platform truck. It can be used almost anywhere equipment and supplies have to be moved. This unique cart increases productivity and reduces injuries caused by pushing and pulling ordinary non-powered carts. This flexible vehicle can travel over carpeting, tile or any hard surface, go in and out of elevators and handle 1,000 lbs. on inclines up to 6 degrees.
New Roller Grip Controls: Roller (red) Speed Controls for Variable Speed Forward or Reverse:
* Rabbit / Tuddle Switch for Top Speed Control
* Power Green Light (which also flashes when battery is low)
* Emergency Stop Bump Switch (that resets with key switch)
* Horn and Key Switch
SAFETY FEATURES:
* Automatic Braking
* Automatic Parking Brake
* Horn
* Emergency Stop Switch
* Flashing Reverse Mode Switch
* Release Brake Drive Inhibit
* Charge Mode Drive Inhibit
* Throttle Fault Inhibit
* Splash Proof Electronics
STANDARD FEATURES:
* Heavy Duty 24-Volt Electronics and Drive Motor
* Articulated Trans-axle Drive
* Center Wheel Drive for Easy Maneuvering
* On-Board Battery Charger
* Free-Wheel Mode
* Two Heavy Duty Maintenance-Free Batteries 33 amp each
* Anti-Skid Deck Mat
* Bumper Molding
OPTIONS:
* Removable Mail-room Rack and Basket Assembly
* Top shelf
* Top shelf with Rubber Matting
* Wire Shelving
* Cylinder Tank Rack
* 6 Colors available |
|
CT1-128/CT2-128
Two versions available: one or two engines
Plate of dimensions: 1200 X 800 mm |
|
Simply by touching the sensor handles – and thanks to touch2move – the trolley "obeys" the operator's natural movements, and automatically adapts to his/her walking speed.
This is made possible by the innovative FSR (force-sensing resistor) technology in the sensor handles, together with the digitally controlled hub drive motors.
Transport trolleys fitted with touch2move drives improve your in-house logistics, thus significantly increasing productivity. |
|
Material handling motorized for staircase:
This material handling makes it possible to climb or descend without effort. it is motorized thanks to integrated batteries. A strap and a support make it possible to make safe the catch of the load. capacity: into 850 lbs |
|
MEASUREMENTS:
Total height: 1600 milimeters
Useful height: 1400 milimeters
Base: 685 x 810 milimeters
PRINCIPAL CHARACTERISTICS:
* Fold-flat Base in the shape of "z" with 4 Gyratory Wheels Diameter 125 milimeters. Nylon
ENDED IN:
Galvanized electrolytic in color silver.
OPTIONAL ACCESSORIES:
Optional central trays and frontal rods may be added. |
|
Nestable Work-Tainer now also available with a plastic platform (PR-WSP604).
• Lightweight.
• Super smoothly running wheels, with 4 swivel castors asa standard feature, 2 of which fitted with brake.
• Sturdy configuration for intensive use.
• Low-noise (steel 92 dB, plastic 87dB,
silent type 65dB).
• With easy " one-touch" operation to fold up the Work-Tainer in mere seconds.
• Very durable. With a double coating finish, both finish painted (approx. 20µ) and powder coated (appr. 70µ).
• No loose parts, i.e. nothing can get lost.
• Several accessories available.
• Very attractive price/quality ratio.
• Optional: Silent Type, especially suited for night-time
transportation. |
|
This model is largely used in industrial sectors that require special hygienic conditions. Compared to a metalic base roll container, the two main advantages are its weight and its washable capacity.
The base is reinforced by 4 metalic structures.
Castors determined upon utilisation. |
|
The SOCO SYSTEM is designed to handle cases, plastic crates, trays plus many of the products inside.
The illustration shows a fully automatic packaging line consisting of the following standard SOCO SYSTEM modules: carton erector, 3-axis free arm robot, conveyors, carton sealer, pallet magazine, palletising robot and pallet stretch wrapper.
The modules can work together or as stand alone units.
|
|
Tubular steel construction. Injury safe structure.
Base covered with a non-slip multi-fold wooden plate.
Panel resists damp, impact and scratching.
Two fixed + two pivoting wheels with brakes, complying with
European standard EN 1757-3 (Safety of handling trolleys). |
|
| These heavy duty platform trucks are offered in a vast choice of sizes and casters to answer the most varied needs as far as the required capacity and type of use are concerned. The 1.25" tubular handle can be inserted at any one end of the platform. Choice of a steel reinforced deck with two 2" x 1" rectangular channels running along its lenght for added strengt and rigidity or of varnished hard wood 3/4" thick. Fitted with 2 swivel and 2 rigid casters. Quality finish. Optional rubber bumpers may be installed at the steel platform corners. Additional tubular handles available. |
|
4403 Utility Platform Truck, 5" dia x 1 1/4" wide (12.7 cm x 3.2 cm) Rubber Casters, Crossbar Handle
Built for durability and efficient mobility of heavy loads.
Complete range of models for versatility.
Sturdy structural foam construction won%u2019t rust, dent, chip, peel, or splinter.
Virtually maintenance free.
Available in 1 or 2 crossbar handle versions to help maneuver loads easily.
9T06 Heavy-Duty Platform Convertible Wagon with 16" (40.6 cm) Pneumatic Wheels
Ideal for transporting heavy or bulky loads in manufacturing, industrial, and groundskeeping settings.
Constructed of a structural foam body.
All wagons come standard with a T-Bar Handle for pulling by hand, optional tow package allows for Pintle or Hook & Eye hitching methods.
A rear hitch allows training several wagons together to eliminate multiple trips.
16" (40.6 cm) pneumatic wheels
Increases capacity to 20 cu. ft. (.6m3) and helps keep small loads intact. |
|
MEASUREMENTS:
Total height: 1520 mm.
Useful height: 1360 mm.
Base: 600 x 740 mm.
Weight (in emptiness): 29 Kgrs.
PRINCIPAL CHARACTERISTICS:
* Arranged 4 gyratory wheels diameter 125 mm. Nylon.
* With 1 doors detachable.
* Capacity of load 300 Kgrs.
ENDED IN:
Galvanized electrolytic.
OPTIONAL ACCESSORIES:
Possibility of mounting intermediate trays |
|
72-80-180
Specifications
Mesh: mm 105 x 350
Base Type: GRM and RINF
Capacity: kg 300 GRM from 400 to 600 RINF according to castors type
Tare weight:
GRM 2 sp Kg 25
GRM 3 sp Kg 30
RINF 2 sp Kg 27
RINF 3 sp Kg 32
Finish: Bright electro zinc plate. ON REQUEST: Straw passivate or hot dip plate.
Other products available:
|
|
This model has a pull down front panel that permits to maintain goods and mercancy as to garanty an easy access to its interior.
Castors determined upon utilisation. |
|
| Display Rollcontainer 1150 x 655 x h.1790 mm - Wire mesh 50 x 50 mm - With inclinable shelf with box retaining edge |
|
* HL Series High Lift Scissor Truck :
Manual :
- Capacity 1000kg (2200lbs).
- Larger piston offer real 1000kg Full capacity .
- Conforms to EN 1757-4
Electric :
- Capacity 1000kg(2200lbs) .
- High quality hydraulic motor made in italy.
- Conforms to EN 1757-4
* Stainless High Lift Scissor Truck :
All parts are made of stainless including hydraulic pump, fork frame, handle, push rod, bearing , pin and bolt, etc.
For use in meat and other food industry, dairy canning and all areas where corrosive acids and saline solutions are used. |
|
An inexpensive and practical approach to faster, safer and easier feeding of blanks or parts in tote boxes. As material is transferred from the feed side to the offloading side, these transporters, with spring actuated platforms, automatically adjust in height for level feeding and offloading with minimum bending, reaching, and lifting. Infinite load settings available with simple spring adjustment.
Features include:
- Automatic height adjustment
- Minimizes bending and stretching
- Simple design is virtually maintenence free
- Supports diverse loading needs
- Caster locks for stability |
|
Welded steel frame. Varnished plywood board. 4 wheels of 125mm diameter with
rubber tyres. 2 fixed wheels and 2 swivel wheels. Blue RAL 5019 finish. |
|
Transport your goods safely, easily, and professionally - with EXPRESSO's reliable four-wheel carts. Variety as a pleasure!
Numerous functional details, such as smooth-running wheels and specialized materials (e.g. stainless steel) ensure that your goods reach their destination safely and conveniently. |
|
5-SHELF MODELS
- The distance between each shelves of these models is 12.75".
- Total height of carts: 65".
- Capacity of carts with 5" resilex casters: 1200 lb. / With 5" rubber casters: 1000 lb. |
|
| Cari-All tubular carts are designed for strength and versatility. The rugged tubular frame is welded to the dolly base to provide stability with wraparound bumper. A stainless bottom shelf for cleanliness and four adjustable wire shelves. 4 6'' (15.2 cm) heavy-duty casters - 3 swivels and 1 swivel-lock. |
|
THE DISPLAY SYSTEM MODUL 5200 -
flexible furnishing, flexible display
new tasks, new procedures, changing forms of organisation and the use of electronic media have completely transformed the professional office landscape as well as the office in the home.
mobility and flexibility are therefore the two most important requirements for the culture of work in the future
these were the considerations which gave rise to the MODUL 5200, the variable display and furnishing system for offices and shops as well as the home. |
|
|
|
Side tables, Trolleys, Hand trucks
