|
|
CASTALIA, the condensing absorption chiller with power modulation, (Systema S.p.A. patent-pending), for the production of cooling and hot water, can be used as a heating system in winter and as a cooling system in summer.
The installation of this brand-new product guarantees important energy savings in comparison with the traditional separated systems such as boiler and electric chiller.
CASTALIA is composed by a highly efficient premixed gas burner with modulation combined with an exchanger: the NOX emissions are very low.
There is the possibility to choose the equipment between 8 different models, with a heating capacity from 12.9 kW to 139.2 kW and a thermic performance of 107.4%.
The available cooling capacity range is 12.5 kW - 115 kW with a cooling performance of 103% that can reach 130% if we consider the energy recovery for the production of sanitary hot water.
|
|
|
|
|
|
The air curtain, INTENSSE Design, is above all intended for the interiors of banks, insurance companies, hotel receptions, and other new modern commercial buildings.
The air curtain is equipped with new technologies, which makes the radical reduction of noise possible, and along with this, decreases the bothering of people in the room. Additionally used technologies are PID regulation and wire coils, which reduce the consumption of energy up to 20% and contribute to protection of the environment.
A totally new product is the GERMICIDAL LAMP (UVC lamp) which destroys micro organisms and bacteria!!! The INTENSSE Design air curtain fitted with this lamp is suitable for sterile environments and other protected areas.
Several changeable accessories are an innovation, which you alone can influence. It concerns, for example, magnetic trimmings on the sides, changeable lamps - here, you can choose between coloured or germicidal, or types of scents.
SPECIFICATION
- single kapacity line, for opening heights of up to 5 m
- 1.0 m; 1.5mand 2.0mlengths
- water heater and electric wire heater
- attractive design of the air curtain
- control panel with LCD display
- integrated PID heating control (with integrated antifreeze
- protection for water version)
- available in version with germicide fluorescent lamp (UVC rays)
- cartridge with fragrance
- 36 months guarantee
|
|
|
|
|
|
This air curtain has been designed with an emphasis on design and quality of manufacturing. Offers the maximum level of comfort of use together with complete electronic regulation and a wide range of designs. It’s most frequent use is in supermarkets, banks, hotels, restaurants, administrative buildings, shops, production halls, etc. The design of the air curtain ensures excellent curtaining effect, quiet running as well as easy installation and maintenance.
SPECIFICATION
- Air curtain lengths: 1.0 m, 1.5 m and 2.0 m
- 4 output ranges with a range of uses for doors up to a height of 10.5 m
with air flow output of up to 10 430 m3/h
- Water heater with an output of up to 62 kW, electric heater up to 18 kW
or air only
- 3-levels of air output, 2-levels of heat output or possibility of fully
automatic mode in connection with up to three external switches
- Control of more several devices connected to one control panel at the
same time
- A wide range of other accessories and hanging elements
|
|
MET MANN presents its new VIS MANN air curtains which provide an air barrier that prevents exterior air inflow.
Its main function is that one of keeping the premises internal temperature, preventing the heat loss inside of it.
We obtain a great energy saving thanks to this system, since the conditioning equipments work less.
The big range of air curtains allows they can be applied on doors of 3, 5 up to 5m high and from 1, 2 up to 2,5m wide. Due to its modularity, these curtains can be installed lined up, achieving so to cover any door width.
|
|
FY-08ESN
900mm type
2-speed selectable
Hi/LO push button switch
Air volume = 650 m3/h
Efficient distance = 2.5m
FY-08ELN
1200mm type
2-speed selectable
Hi/LO push button switch
Air volume = 880 m3/h
Efficient distance = 2.5m
FY-10ESN
Air Curtain ( FY-10ESN )
900mm type
2-speed selectable
Hi/LO push button switch
Air volume = 750 m3/h
Efficient distance = 3m
FY-10ELN
1200mm type
2-speed selectable
Hi/LO push button switch
Air volume = 1,000 m3/h
Efficient distance = 3m
FY-12ESN
900mm type
2-speed selectable
Hi/LO push button switch
Air volume = 1,050 m3/h
Efficient distance = 3.5m
FY-12ELN
1200mm type
2-speed selectable
Hi/LO push button switch
Air volume = 1,420 m3/h
Efficient distance = 3.5m
FY-14ESN
900mm type
2-speed selectable
Hi/LO push button switch
Air volume = 1,340 m3/h
Efficient distance = 4m
FY-14ELN
1200mm type
2-speed selectable
Hi/LO push button switch
Air volume = 1,867 m3/h
Efficient distance = 4m
|
|
This air curtain is intended for ceiling installation. The compact design of the air curtain allows easy mounting without need for extra parts or brackets. Maintenance is easy and the face grille is nice to look at while comprising the integrated intake and exhaust. The air curtain can be supplied with complete electronic regulation which allowing automatic running, which ensures maximum efficiency and a high level of energy savings. The most frequent use of this unit is in supermarket entrance halls, banks and hotels, restaurants and administrative buildings etc.
SPECIFICATION
- Air curtain lengths: 1.0 m, 1.5 m and 2.0 m
- 2 output ranges with a range of uses for doors up to a height of 7.5 m
with air flow output up to 5 040 m3/h
- Electric heater up to 18 kW, water heater up to 54.5 kW, air only version
- 3-levels of air output, 2-levels of heating output or fully automatic mode
in connection with up to three external switches
- A wide range of other accessories and hanging elements
|
|
Air curtain
Whether as passage barrier, thermal or hygenic bulkheading, as smell barrier or cool air barrier, whether in camps, supermarket, cold-storage depot, industrie or crafts enterprise - the air curtain aero is universally for middle Türöffnungen to 5,000 x 5,000 mm applicable. It offers not only the optimal bulkheading for doorless openings, but guaranteed at the same time brisk and barrier-free maneuvering without starting damage. Beyond that the air curtain saves aero heating costs, since also ranges with high temperature differences without loss of energy are from each other separated.
|
|
|
|
|
|
This is an air curtain designed for use in industrial areas and to curtain more exacting areas. It can be mounted horizontally or vertically. The design and output of the curtain was adapted to the usage in question. All this is reflected in long lifespan and reliability of the device, which thanks to this fact is maintenance-free and easy to operate. The air curtain is particularly used to curtain large openings such as doorways in production and storage halls, hangars, garages, machine plants and transport depots etc.
SPECIFICATION
- Individual modules are manufactured in lengths of 0.55 m, 1.5 m and 2 m
- Range of use for doors at a height/width of up to 7 m with an air volume
of up to 10 200 m3/h
- Can be installed vertically or horizontally with easy connection of
individual modules
- Electric heater up to 18 kW, water heater (2 output versions) up to
36 kW, or air only version
- 5-level fan speed with the possibility to use external switches
- Control of several units at once using one control panel
- Possibility to supply sophisticated solution for regulation of water heating
|
|
|
|
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has air curtains for any need; temperature control, insect control, environmental controls. TMI has the right air curtain for the job.
Commercial door units are designed to be aesthetically pleasing, quiet, and efficient. Light Industrial units are best suited for applications inside a plant or warehouse. These popular units are ideal for controlling unwanted airborne contaminates, such as dust or fumes. Medium Industrial are the most widely used of all industrial air door units. These air door units have the same size cabinet as our light industrial units, but have more powerful motors and fans for increased performance. Medium industrial air doors are often used on loading dock doors to control heating and air conditioning loss. Heavy Duty and Extra Heavy Duty air curtains are for the larger industrial doors.
All Save-T Air Doors/Air Curtains are easy to install, quiet, and efficient. Most doors can be ordered with either electric or hot water/steam heaters. Heaters are mounted to the intake side of the air door unit and can raise the temperature of the exiting air stream by as much as 30°F. Indirect Gas fired heaters are recommended for larger industrial doors.
|
|
The range of helicoid aerotherm consists in 7 different models used either in heating or cooling mode.
These equipment are intended to large volume buildings, store house, garage, workshop...
Aircalo aerotherm enables rapid heating or cooling volumes at the same time, mixing the air sufficiently to prevent its stratification (it is possible to complete this mixing by using zephir air recyclers).
Depending upon the characteristics of the building to be equipped, the Aircalo aerotherm may be hung (vertical blowing) or wall mounted (horizontal blowing).
CAUTION :
In cooling operation, the vertical mounting (horizontal blowing) should only be used. In this case, a condensate vessel is supplied.
These Aircalo aerotherm are designed to satisfy quality criteria and standards in force.
|
|
BABCOCK WANSON offers a complete range of solutions suitable for the heating of large spaces and smaller buildings :
- air unit heaters gas fired or for use with secondary heat transfer fluids ;
- warm air cabinet heaters gas-fired and light oil fired ;
- air handling units, make-up air replacement heaters and modular units with exchangers, mixing chambers and filter sections ;
- radiant tubes, door heaters, destratification fan units.
BABCOCK WANSON manufactures equipment to deal with a variety of drying applications :
- heaters with direct combustion (up to 12000 kW and 1200°C) ;
- heaters with indirect combustion (up to 3000 kW and 300°C).
|
|
* Fan motor assembly with ROTOREX technology and streamlined impeller providing the best compromise between air handling efficiency and acoustic comfort.
* Double deflector diffuser with JET+ technology as standard. A CIAT innovation based on Bernoulli's principle on fluid dynamics and on the NACA0012 type aeroplane wing profile. Comfort, silence and energy saving are not optional at CIAT...
* Highly efficient heat exchanger with tapered baffles. With seventy years' experience in the field of coils, CIAT provides the best combination of tube geometry and fin design on the market.
* Antibacterial condensate drain pan with integrated quick connection fitting for cooling or reversible applications.
* Wide range of accessories for all site requirements (mounting, filtration, fresh air, mixing etc.)
* Extensive range of regulation units for all uses (on/off, proportional, electric battery etc.)
|
|
Effective air flow heating, variable designs:
The best way to heat airflow, as seen in automatic devices or tumble dryers. We produce adapted heating elements for your fans or, when required, with fan.
Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set.
|
|
|
|
|
|
MODULE FOR INCREASING TEMPERATURE
MM-050-TEC / MM-090-TEC / MM-160-TEC
DESCRIPTION:
Heating module designed for increasing the temperature of the air canalised inside of it (thermal difference of 17ºC to 60ºC).
Its big versatility turns it into an equipment with great application in the premises heating area, as well as in that one of materials drying processes as for example: furniture, metal pieces, vegetables, etc.
Its main features are:
-Operation with heating gas oil, natural gas or liquefied petroleum gases.
-Combustion oven made for achieving a performance of 90%.
-Tubular structure painted with black priming.
-External panel thermally and acoustically insulated.
-It has three operating thermostats (fan start-up, burner stoppage and security thermostat).
-Fastening hooks for an easy transport.
The base equipment does not incorporate fan nor electric panel, but it can be supplied if you ask it so.
FUEL:
Heating gas oil / natural gas / LPG
APPLICATIONS:
Premises heating, products drying, etc.
|
|
- Robust and compact design
- Can be used for fixed mounting on the wall
- Low noise level and high air flow
Proff is a range of compact, portable fan heaters designed for
craftsmen and others who need both temporary and permanent
heating for buildings sites, warehouses, workshops etc. It is
particularly well suited for drying applications. The heaters
have a handle and can easily be mounted onto the wall.
Proff fan heaters must not be used in the proximity of
swimming pools or other places where there is open water.
The units are made of galvanised steel with heating elements
of stainless steel. Powder coated in light grey with a black
stand and grille. Proff 2 kW and 3 kW are supplied with a
2 m supply lead and a DIN grounded plug. The Proff
5 kW and 9 kW are also supplied with 2 m lead but with a
CEE round-pin plug for 3 phase power supply. The Proff
15 kW, 20 kW and 30 kW are supplied with a 1.8 m cable
without plug.
The thermostat can be set between 5°C and 40°C.
|
|
Adding a fan to a heater creates artificial air movement. This air movement allows for a more compact heater than the convection heater since rapidly moving air removes the heat from the heater surface more quickly. The forced air heater forces air over very long distances and is usually the choice for heating larger areas.
Applications
- Shipping and Receiving Areas
- Pump Houses
- Power Generating Stations
- Aircraft Hangers
- Factories
- Warehouses
- Garages
|
|
The air heater units Gejze are designed for heating nad ventilating the industrial halls assembly rooms, workshops, shopping malls row of shops and similar huge objects.
Gejzer works based on:
- recirculated air (Gejzer I, Gejzer II),
- mixture of fresh and recirculated air (Gejzer MIX).
The heating medium is water delivered to Cu/Al heater from heat source.
There is a possibility of co-operation of several some devices for large building complexes. in the case of large rooms.
There are two models available in market:
- Gejzer I with max. heating power of 26 kW in max. heating power,
- Gejzer II with max. heating power of 52 kW in max. heating power.
|
|
Consisting of carrier tube in nickel-plated or stainless steel. With spot-melded metal frame and carriers made from mica. Different messures, voltages and outputs are possible.
Applications: Mechanical engineering, plant construction, chemical industry, plastics technology, e.g.
|
|
Applications
Type T3C Explosion Proof Unit Heaters are suitable for Hazardous Location Classes I and II, Groups C, D, F, and G. Ignition Temperature Code Rating is T3C, (320ºF), (160ºC).
Standard Features
*Industry's lowest ignition temperature code rating compliant.
*Epoxy coated corrosion resistant cabinet with adjustable louvers.
*Redundant overtemperature protection with dual automatic reset thermal cutouts for safety.
*Sealed heat exchanger with nontoxic Propylene Glycol heat transfer fluid and low pressure 70 PSIG relief valve.
* Cast aluminum electrical enclosure with 24V control circuit.
Options
Contact Gaumer for: Group E (Metal Dust) Construction, Dirty Duty Corrosion Resistance, Arctic Duty Motor (-40ºF/-40ºC), Non-standard motors (ie. 50Hz), Adjustable Thermostat, 120 Volt Control Circuit, Auto/Fan Selector Switch, Manual Reset Thermal Cutout with Magnetic Contactor, Pilot lights.
|
|
Terminal air heater
"Drawer-type" heaters, which are designed to be installed directly in an opening made in the duct, are built around stored elements. They are bent upon request and can be delivered in small series in a week.
For ducts diameter from 100 to 630 mm and rated from 500 W to 36 kW, the terminal heaters for circular ducts are assembled using elements kept in stock. They may be delivered in small series within 48 hours.
A series of self-controlled circular terminal heaters was developed to satisfy the desire of users for precise temperature control in each room. They can be controlled by electronic thermostats or remote industrial controllers. Many safety accessories are optionally available.
|
|
- Performance up to 95%.
- Big airflow fan to reach the temperature of comfort in very short time.
- Pellets burner of high thermal efficiency with security systems.
- Electronic control that actuates all functions to a properly functioning of the equipment.
- Pellets feeder with motor-reducer for the provision of required fuel in each process.
- Pellets container of 220 kg capacity.
- The distribution of hot air can be made through rotating plenums, perimeteral grills or through air ducts.
|
|
Technical details
• Protection class: I
• Protection type: IP 20
• Mounting: Snap fastening
• Connection: Connecting cable 0.5 m 3 x 0.75 mm²
• Mounting position: vertical
• Fan function:
- permanently on operating voltage
- optional via separate supply line
• Blow-out temperature: ca. 60°C
• Enclosure temperature: ca. 70°C
• Temperature limitation: 71°C ± 7.5 K operating difference
• Fan service life: 50,000 hours
|
|
Technical details
• Protection class: I
• Protection type: IP 44
• Mounting: Screw fastening
• Connection:
GH2000: Connecting cable 2 m 3 x 1.5 mm²
GH4000: Terminal block 2.5 – 4 mm²
GH4000 (400V Version): Connecting cable 2 m 3 x 1.5 mm²
• Mounting position: horizontal
• Blower function:
- permanently on operating voltage
- optional via separate supply line
e.g. separate control of blower or other voltages
• Blow-out temperature: GH2000 ca. 100°C
GH4000 ca. 110°C
• Fan service life: 50,000 hours
|
|
Applications
Type GUH industrial quality horizontal blower heater is designed to heat factories, warehouses, garages and other areas requiring forced air heating with no associated duct work.
Standard Features
Metal sheathed finned tubular heating elements encased in a 16 gauge steel cabinet with a powder coated finish. Unit includes a heavy gauge return air grille and adjustable louvered supply grill for comfort.
Options
Universal Wall and Ceiling Mounting Brackets provide flexible mounting arrangements - contact Gaumer.
|
|
U.L. Recognized - E56973 C.S.A. Certified - 016386-0-000
Applications:
Copiers, Dehumidifiers, Glue Guns, Heat Sealing Tools, Instrumentation, Resisters, Soldering and Desoldering Equipment, Valve Heaters.
Features:
-The Hotwatt Ceramic Heater is a ceramic body encasing a resistance element and packed within magnesium oxide.
-The heaters are terminated with flexible insulated lead wires.
-Temperatures to 1300°F (705°C)
Construction:
-Ceramic body
-Premium grade resistance wire element
-Magnesium oxide packing
-Ceramic end seal
-Flexible insulated lead wires
|
|
ULTRAMIC™ 600 Advanced Ceramic Heater
When you need a lot of power in a small package, the ULTRAMIC™ 600 puts the performance of advanced ceramics to work for you. Constructed of aluminum nitride (AlN), the ULTRAMIC 600 can operate up to 600°C (1112°F) and deliver ultra-fast ramping of up to 150°C (270°F) per second for rapid thermal cycling applications.
The robust mechanical structure of the high density AlN enable these heaters to exhibit exceptional mechanical stability throughout the temperature range. This makes the product especially suitable in applications where consistent part-to-part thermal contact during heating cycles is critical. Additionally, these heaters are applicable when requiring a clean, non-contaminating heat source as they are particle free, impervious to moisture and resistant to acidic attack.
Applications:
Semiconductor wire and die bonding
Analytical instrumentation
Medical devices
Packaging
Aerospace
|
|
Ceramic cartridge heater:
- Suitable for air temperatures up to approx. 600° C
- With motor tap
- Heat resistant connecting leads
- 220-240 volts up to approx. 2000 watts possible
- With integrated shunt for electronic type
- For temperatures 100-600° C
|
|
Infrared SUNRAD Emitters is suitable for great radiant efficiency, thanks to the very high temperature of its emitting surface (900°C) and to its small dimensions.
SUNRAD emitters can be installed at considerable height (up to 30 m) considering they are provided with a reflector concentrating the radiation power.
Sempre più diffuso per il riscaldamento dei luoghi di culto
|
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings
|
|
SAVANA is a new heating unit. It is offered in four various designs, which enable a wide spectrum of use. The design with a silver front cover with
V-lamellas or Jets is most suitable for supermarkets, stores and sports complexes. The industrial design without a front cover is recommended for production halls and other industrial premises.
SPECIFICATION:
- 4 types of design
- Air output up to 6900 m3/h
- High heater power up to 92 kW
- "V-TECHNOLOGY” and “JET System” for higher output and comfort
- Adjustable bracket for horizontal and vertical setting
- Easier installation for connecting water
|
|
|
|
Heating equipment
