|
|
|
Insulting matting prevents workers from being 'grounded', provides safety in case of electrical shock.
|
|
Zenith Rubber manufactures a wide range of rubber matting’s for various applications. Zenith offered the entire range from mats for entrances and doors to smaller car mats.
Technical mats for industrial purposes are also available. Mats for electrical insulation up to 50,000 volts are tested in our inhouse facility. Each roll is thoroughly tested as per specification ensuring complete safety with clear markings of test standards.
Tough long lasting mats are designed to protect operatives from electrical shops. Easy to clean and maintain. It is available in several designs and colors for aesthetic appeal.
Manufactured as per BS 921, AS 2978, ASTM-D 178 or IS 5424.
For more details please visit our website www.zenithrubber.com
|
|
|
|
|
|
Scopri perchè 3M Nomad™ Aqua Plus rappresenta il primo passo per un edificio pulito e sicuro.Va sottolineato che già dalla fase di progettazione di un edificio esistono vincoli precisi legati al rispetto delle normative riguardanti igiene, sicurezza e viabilità di entrate ed uscite; è quindi indispensabile identificare qualcosa che sia allo stesso tempo gradevole esteticamente, efficace e che non ne alteri il design.
Non tutti i tappeti d’ingresso sono uguali e selezionare il prodotto ideale significa considerare diversi fattori quali: ubicazione dell’edificio, livello e tipo di traffico (nr. di passaggi) in funzione delle condizioni metereologiche. E’ altresì importante determinare quanto sporco ed umidità il tappeto è in grado di trattenere, il costo, il disegno, la gamma colori ed in ultimo l’incidenza sui costi di manutenzione.
Ecco perchè è necessario conoscere meglio la linea 3M™ Nomad™ Aqua Plus: grazie all’innovativa struttura a 3 strati con un esclusivo piano drenante in 3D sono in grado di rimuovere dalle suole una maggiore quantità di sporco ed umidità. Lo strato superiore a doppia fibra presenta fibre spesse che catturano e rimuovono lo sporco, mentre quelle più sottili assorbono l’acqua in eccesso. Lo strato inferiore, invece, ha una riduzione di PVC di oltre il 50%, è autogiacente, previene scivolamenti e cadute, è impermeabile e non rilascia umidità.
|
|
|
Nei grandi edifici commerciali, con condizioni di traffico estreme, scegliete Nomad™ Optima. Il tappeto Nomad™ Optima è in struttura di alluminio, altamente durevole ed in grado di trattenere elevate quantità di sporco, acqua ed umidità. A differenza di altri sistemi in alluminio, Nomad™ Optima contiene inserti in tessuto ad elevata performance di Nomad™ Aqua Plus 8500 che assorbono l’umidità, rimuovono e nascondono lo sporco all’interno della fibra.
|
|
Two-component reference resin (100% dry extract, no solvent, no odour): variable thickness and numerous finishes possible depending on your specifications.
High resistance (performance classification No. RT00-072 by the CSTB) to traffic, to abrasion and to chemical products ("sealed" floors). High adherence of epoxy.
For heavy duty flooring indoors (or outdoors with an application of Topcolor) made of concrete or with an old epoxy resin coating:
- easy application (two roller-applied coats recommended),
- or applied by our technicians for many different thicknesses and finishes.
1 coat of Neopox = 4 coats of conventional floor paint.
|
|
100% solids (no volatile organic compounds) self-leveling floor coating that can be applied to smooth or mildly spalled concrete, producing an extremely durable and attractive chemical-resistant finish.
KEY FEATURES
* Silica aggregate can be added to rebuild floors that need a “high build” coating of 1/8” or greater
* Safe-T-Grit 300 or Anti-Skid Silica (food grade) can be added to the mixture to provide a non-skid surface
* Acceptable for use in meat and poultry plants
|
|
|
These resilient 18” x 18” super-sized tiles effectively interlock to create an Ergonomic Flooring System designed to increase worker productivity. Designed for comfort and total flexibility, ErgoDeckTM SOFT will withstand heavy use, and can be unlocked and repositioned to create different configurations. Available in solid and drainage designs.
|
|
|
|
|
|
- Ref NT791 : Anti-static mat that can be earthed, specially designed for electronic product and manufacturing areas where controlling static and fatigue is vital. Equipped with an upper vinyl surface, this mat, when earthed, ensures rapid and effective dissipation of static electricity, while its nitrile foam underlayer offers firstrate
comfort and improves employee productivity. Resistivity:
1x107 ohms. Application: all surfaces sensitive to static
electricity. Upper vinyl surface, nitrile foam underlayer.
. Colour: grey
. Size : 0.61x0.91m / 0.91x1.52m - thickness 12.7mm
- Ref NT796 : Anti-static mat that can be earthed, three times more resistant than conventional sponge-type mats. This product will meet all budgets and still offer all the advantages of a more expensive mat. Application: protects your products and equipment from static electricity discharge. Resistivity: 5x108 ohms.
Vinyl/nitrile foam, rough top surface.
. Colour: black
. Size 0.61x0.91m / 0.91x1.52m - thickness 12.7mm
|
|
In many facilities, people are one of the prime generators of static electricity.
The simple act of walking around or even sitting on certain types of stools can generate several thousands volts on the human body. If not properly controlled, this static charge can easily discharge into static sensitive devices, potentially creating damage to equipment. These NOTRAX® Electro Static Discharge (ESD) protective mats are formulated to drain static electricity from workers thereby avoiding unpleasant static shock while safeguarding equipment.
|
|
The MEISER Finned Grating represents a special form of press grating, which is distinguished by its projected cross bars.
Finned gratings are enclosed pressure locked gratings, with crossbars which protrude above the surface of the grating. The cross bars are pressed into the notched bearing bars on center-to-center spacings of 11,1 mm, 16,65 mm and 22.2 mm.
The standard spacing between the bearing bars is 100 mm, but can be varied to suit the end users loading requirements. The length of the span ( the direction of the bearing bars) can be up to 500 mm. The gratings are designed for ”pedestrian access”.
Finned Gratings are widely used as gutter gratings or on gangways for building maintenance. Other common fields of use are swimming pools and air conditioning. Comb gratings are available in steel, aluminium and stainless steel.
|
|
|
80% of dirt and moisture is tracked into buildings on the soles of visitors’ shoes. Nomad™ Entrance matting by 3M is designed to stop it at the door, maintaining a clean welcoming entrance. It reduces accidents from slips and trips too, protects your floors from avoidable wear and tear, and plays a vital role in reducing cleaning and maintenance costs. Durable and easy to clean, our entrance matting comes in a wide range of attractive designs to complement your interior décor.
|
|
|
|
|
|
Anti-slip TRAFICLINE® tiles
Anti-slip TRAFICLINE® tiles
Install a safety floor quickly and easily, with minimum disruption to on-site activities.
A "rice grain" structure for industrial and community service buildings floors which require an antislipping floor.
A brilliant satin finish to facilitate the maintenance
An outstanding weight for this loosely laid interlocking PVC tile : + than 9kgs/m2 !!!
Available in a range of standard colours : steel grey, anthracite grey RAL 7016, black, green RAL 6028 and security yellow.
EUROTILE
New interlocking PVC tile for public and industrial floors : schools, administrative buildings, shopping malls, hospital, stations, airports, storage and production areas…
A whole of innovations patented for this tile :
With the recto : fine grained surface, not slipping and easily cleaned
With the back side : a system of circulation and evacuation of the air and fluids
Invisible interlocking system.
Thermic and phone insulating
Surface treatment : Long term STAINPROOF®protection
Easy and fast to install
Useful dimensions : 500 X.500 mm - Thickness: 8 mm - Weight : 9.20 kg/m²
CSTB performance classification. Statement available on request.
|
|
EUROTILE®
New interlocking PVC tile for public and industrial floors : schools, administrative buildings, shopping malls, hospital, stations, airports, storage and production areas…
A whole of innovations patented for this tile :
With the recto : fine grained surface, not slipping and easily cleaned
With the back side : a system of circulation and evacuation of the air and fluids
Invisible interlocking system.
Thermic and phone insulating
Surface treatment : Long term STAINPROOF®protection
Easy and fast to install
Useful dimensions : 500 X.500 mm - Thickness: 8 mm - Weight : 9.20 kg/m ²
CSTB performance classification. Statement available on request.
|
|
|
|
|
|
FLOOR-HT is the access flooring system that fully satisfies the strict quality requirements for constructing controlled environments for the semiconductor industry; the strength, corrosion resistance and emission levels of condensable volatile materials of these panels make them perfect even in chemical processing laboratories and departments.
The panels are installed on specially designed modular support structures, raised between 150 and 1200 or more millimetres of the floor.
The perforated, ribbed panels are specially designed to allow air intake at floor level in environments with very high air purification classification, to guarantee one-way airflows over the entire surface of the surrounding room.
The different perforation methods mean that internal dividing walls can be installed on the central axes and borders of the panels without blocking any of the holes. The perforated panels can be equipped with a series of air-locks that are easily controlled from above by a common device.
Appliances:
Cleanrooms for Microelectronic, Electronic, Optical, Mechanical and Aerospace industries
|
|
Our cleanrooms stay tight and safe even when your floors are uneven.
The wall elements are placed into pocket profiles which absorb surface irregularities of up to 30mm.
Floors which are only fitted later on can be equipped with a negative base frame. Thus the floor covering is flush-mounted with a cove on the wall system.
If you wish, we can also offer to put in floor covering which meets cleanroom requirements.
|
|
- A comprehensive GRP service for any applications in corrosive environment : Long life quality, Lightweight, Highly safe.
- Molded gratings KEFREN range , pitch 19x19 mm, thick 30,38,50 mm, all dimensions up to 3mx3m.
- Pultruded gratings KEOPS range, pitch 19 ,31 mm.
- Solid flooring SAKARA : lozenge or grit cover, thick 53 mm. All dimensions up to 3mx3m.
- GRP Frame work, stair treads, stairs, , safety ladders.
|
|
One of the largest manufacturers of flatbar in Europe, we offer our customers a comprehensive range of starting products, finished products, refinements and surface treatments as well as more sophisticated design products such as staircase installations.
The international presence of our trademark world-wide stands for fundamental know-how and experience. In 5 productions plants world-wide, we insure innovation and continuous improvement of our grating products.
We would like you as our customers to benefit from our years of know-how and from our highly competent planning assistance service.
|
|
|
Matting with excellent wear and tear resistance. Used as flooring, shelve liners and in all kinds of industrial applications in workshops, near machines and any place where objects may tend to slide on workbenches, carts, cars or lorry booths. Withstand diluted acids and alkalis.
|
|
Multiple completions for identified needs
Rough panels: The aspect of the agglo gross is appropriate for the floors of storage
Principle of tonguing and grooving for agglo gross HD ép.30 mm
Panels with under white face (ép. 38 mm): this type of floor is very appreciated because it does not generate dust with the use.
The shifted strip allows screwing so that fixings are not apparent.
*Autres standard of floor:
Wood (OSB, plywood.) - Floor collaborating with filling concrete - Grating - larmées Sheets - Thermal - Acoustics,....
|
|
Molded High Load Capacity (HLC) Grating
Heavy-duty grating for fork lifts up to H20 loads
Corrosion Resistant
Non-Conductive
Long Service Life
Low Maintenance
For Forklift up to H20 Loads
Molded HLC grating is yet another product in the arsenal of engineered FRP solutions by Fibergrate. While capitalizing on some of the traditional benefits of molded grating products - high strength, corrosion resistance, fire retardancy, nonconductivity and low maintenance -this specially manufactured molded FRP product has been engineered to carry from loads from forklifts up to H20 loads that traditional molded FRP grating products are unable to support.
|
|
A washable mat with your own logo. Superb quality & fast delivery.
When it comes to first impressions, you only get one chance! So put your best foot forward with Notrax® State-of-the-Art BrilliantStep TM.
|
|
|
24/Seven Solid anti-fatigue mats are incredibly versatile, modular and designed to meet industrial challenges. Able to connect on all four sides, they accommodate small or large areas. You can choose from a Cutting Fluid Resistant or a NEW Petroleum/hydrocarbon resistant formula. An additional GritWorks! surface is available in hazardously slippery areas.
|
|
|
Incredibly, Wearwell has just introduced a modular urethane mat that can effectively interlock on all four sides. Rejuvenator Connect is Wearwell’s new, virtually indestructible, modular urethane mat. Offering extremely high performance and undeniable comfort it creates an appealing aesthetic for industrial, laboratory, pharmaceutical or commercial environments.
|
|
|
Nomad™ Modular combina l’elevata performance con soluzioni di design molto flessibili ed installazioni in loco semplici. E’ disponibile in due versioni : Nomad Modular 8300, progettato esclusivamente per rimuovere e catturare lo sporco solido ed i detriti, mentre il tipo 8900, realizzato con un inserto centrale in fibra Nomad™ Aqua Plus 8500, è in grado di rimuovere lo sporco e, nello stesso tempo, di catturare e trattenere l’umidità. Le mattonelle vengono agganciate in maniera semplice e veloce e vengono bloccate in loco grazie al sistema di clip, è possibile, inoltre, adattare la combinazione di tappeti in base alle diverse esigenze di spazio e di design.
|
|
|
|
|
|
very resistant non slip covering recommended for inside or outside uses.
Plain version : in order to treat large surface.
Self-adhesive version : in order to treat little smooth surface
Comfortable non slip covering resistant for high traffic.
Environment: In wet or dry conditions for risk prevention and safety. Chemical characteristic: Elastomeric polyurethane complex poured onto a polyester rotproof non-weaved undercoating. Thickness: 2.1mm Granule: Non abrasive flexible granules 800µ Weight: 2.5kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 90
Coefficient on wet ground : 55
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 40% before breaking. Simple maintenance: Regular cleaning with water and household detergents. Inside factories and shops, the use of biodegradable detergents with a pH of 9 is recommended. Tests and standards: Classification M3 stuck application on surface M0 non insulating (LNE).
Classification building according to NF EN 14041 (LNE) CP1 S1.
|
|
|
|
|
|
fine and flexible non slip covering for high pedestrian traffic.In self-adhesive format ready for use for applications on surfaces in aluminium, stainless steel, galvanized steel, smooth gelcoat, tiled floor.
Non slip covering with soft grip for high pedestrian traffic.
Environment: Wet or dry conditions Chemical characteristic: Elastomeric polyurethane complex with high non slip performance on adhesive film. Thickness: 1mm Granule: abrasive granules 800µ Weight: 600kg/sqm Skidding conditions: Measurement of roughness of the surface on RRL pendulum according to road non slip standards for pedestrian ways NFT 98609-1 (scale from 0 to 150). Test coming from laboratory of Ponts et chaussées from Angers.
Coefficient on dry ground : 105
Coefficient on wet ground : 80
Classification R13 to standard DIN 51 130
Resistance: Very good resistance to U.V, (7 on the scale of the blue textiles rated from 1 to 7). Very good resistance to natural chemical agents, oils, grease, hydrocarbons, salt water.
Excellent resistance to abrasion and shocks. Resistance to traction: 24daN/sqcm of tractive front. Resistance to temperature: from -30°C to +80°C.
Flexibility / Deformation: Elongation = 4% before breaking.
Simple maintenance: Regular cleaning with water and household detergents.
|
|
TBS, for an increased security of the passages pedestrians on blade of terrace wood in moist environment or dryness. According to the measurement of comparative roughness of a Essai surface to pendulum SRT normalizes NF P 98831-4. Value of coefficient of friction in moist environment: 38 for a wood in IPE grooved against 61 for the TBS 21.
Coating TBS brings a durable solution and effective on the floorings wood in natural environments (footbridges of crossing, let us bridge, slopes, terraces)
A preventive solution adapted for pedestrian installations with great traffic.
A recommendation intended for the ERP and roadway systems, local government agencies, Architects and Study Bureau.
|
|
Cicol NT
- High performance, extremely durable, anti-slip coating
- Combined anti-slip wearing course and waterproof membrane
- Suitable for steel, concrete and aluminium substrates when a lightweight anti-slip surface is essential
- Acknowledged as the most durable, lightweight surface available and has an unrivalled track record over the past 35 years
- By combining the NT Slurry Kit with different aggregate sizes, the Cicol™ system offers a lightweight combined waterproofing and anti-skid solution for heavy duty vehicle traffic or lighter pedestrian and cycle routes
Ideal for:
- Bascule / Swing / Foot Bridges
- Loading bays
- Forklift truck ramps
- Walkways
- Depots
- Refuelling stations
|
|
|
|
|
|
Zenith provides variety of anti-skid flooring mats for multipurpose use. The primary objective is to provide a durable nonskid floor mat. While using flooring mats slippage or creeping of floor mats has always been a problem in wet or dry applications. Our various anti-skid mats are the best solution for it. Our mats are excellent in shock absorption and slip resistance as well as providing improved walking comforts. Truck flooring mats with anti-skid ridges prevent shifting in your vehicle and come with a protective, non-stick finish to make cleaning quickly and easily. Mats are available in various compounds depending on their indented use.
Types of Flooring:--
• Fine Rib General Matting (MR 65)
• Fluted Rib Matting (DS 65)
• Narrow Flat Fluted Rubber Matting (LS 65)
• Broad Rib Mat (CR 65)
• Transit Rib Flooring (TR 80)
• Wide Rib Mat (BR 65)
• Premium Quality Anti-Slip Diamond Design Matting (DD 65)
• Pyramid Pattern Anti-Slip Rubber Matting (SD 65)
• Checkered mat (CD 65)
• Coin Matting (CS 80)
• Truck Flooring Mat (TF 70)
|
|
For non-flammable petroleum spills, use PIG® Oil-Only Rolls.
Sometimes you simply need a mat to last longer and absorb more. With a super-thick bottom and super-tough top, FAT MAT™ Rolls are perfect for hard-to-reach areas, wet walkways, big cleanups or any other job requiring long life and high capacity!
|
|
|
|
Mats, Gratings, Floor coverings
