|
|
Xaloy extruder suppliers and injection barrels lead the way in resistance to wear and corrosion. We invented bimetallic barrels (cylinders) more than 70 years ago and continues to lead the way in development of improved alloys and production processes
X-800: Tungsten carbide/nickel alloy composite
Our most durable extrusion barrel, for processing almost any material
Outstanding resistance to abrasive wear and corrosion
Essential for extrusion of hard-to-melt materials such as HMW-HDPE or LLDPE and of highly filled abrasive materials containing >25% glass fibers or mineral fillers (calcium carbonate etc.)
X-802: Tungsten carbide/nickel alloy composite
Our most durable injection molding barrel, for processing almost any material
Guaranteed for 4 years.
Outstanding resistance to abrasive wear and corrosion
Essential for molding highly filled abrasive materials containing >25% glass fibers or mineral fillers (calcium carbonate etc.) and for hard-to-melt materials such as HMW-HDPE or LLDPE
X-102: Nickel-rich iron-boron alloy
High-quality general-purpose barrel
Cost-effective choice for unfilled and lightly filled materials
Outlasts generic competitive barrels in comparative testing
X-200: Higher-chromium iron-boron alloy
Premium general-purpose barrel
A step up in resistance to corrosion and abrasive wear
|
|
| It is sized for all production capacities up to 150 kg/h and produces extraordinary savings that allow a pay-back time inferior to three months. |
|
| The 150 Series of low speed granulators is intended primarily for beside-the-press injection moulding applications. Immediate recycling of sprues and reject parts maintains product quality and eliminates the distribution and storage of waste and regrind. |
|
| Calibrating table design ensures significantly lower energy consumption, low noise, easy maintenance and operating convenience |
|
The heating cartridges are used for the heating until 750°C of metal parts such as moulds, systems with hot channels, dies, tools of splicer and marking in the industry of the plastics and the machines of conditioning.
The heating collars are used for the heating of cylindrical parts. Of robust design, the characteristics (insulator-connector industry) are closely related to the operating conditions
|
|
hotrod® cartridge heating elements (type HHP and LHT) are core products of hotset´s tradition. Excellent knowledge, high-quality materials as well as the outstanding manufacturing guarantee long life and excellent product features.
By intensive cooperation – also with special applications – hotset gives again and again innovative impulses to its cartridge heaters with new technical features (e .g. humidity-resistant connection area).
By optimal production conditions of Hotset Malta Ltd. an unique price-performance ratio can be achieved for larger quantities. Hotset cartridge heaters offer high functionality and high production safety – driving quality!
|
|
Vulstar® cartridges are used to heat metal like moulds, dies, plates and manufacturer of bolts or liquid.
Supply voltage up to 450 V 1P or 3P.
Load up to 40 W/cm2.
Length from 25 mm to 2500 mm depending on diameter.
Diameter from 6,35 mm (1/4") up to 31,8 mm (2" 1/4).
Different types of connection to fit with the ambient temperature.
This cartridges can be provided with a thermocouple manufacturers . |
|
The Watlow FIREROD® heater enters its 50th year of industry leading expertise as the premier choice in swaged cartridge heating. With premium materials and tight manufacturing controls, the FIREROD heater continues to provide superior heat transfer, uniform temperatures and resistance to oxidation and corrosion even at high temperatures.
FIREROD offers many delivery programs to meet your needs: same day shipment, Ship-to-Stock or Just-in-Time. And our experience in customized engineering is reflected in over 250,000 FIREROD cartridge heating designs. Stock or made-to-order, the Watlow FIREROD delivers heat in a hurry.
Applications
Molds
Dies
Platens
Hot plates
Sealings
Fluid heating
Life sciences
Aerospace
Semiconductor
Foodservice equipment |
|
U.L. Recognized - E56973 C.S.A. Certified - LR-16386
Applications:Compressor Crankcase Heating, Copiers, Dies, Food Processing, Glue Pots, Heat Sealing, Hot Melt Professional adhesive, Labeling, Medical Equipment, Packaging, Photographic Processing, Plastic Molding, Platens, Wax Pots.
-Hotwatt Precision Cartridge heaters provide localized heat to restricted work areas requiring close thermal control. Dies, Platens, and a variety of other types of processing equipment are efficiently heated. Closely controlled work temperatures up to 1250°F are obtained by a combination of heater location and proper wattage output.
-Basic designs are readily adaptable to a wide variety of special requirements, sizes, or ratings.
-Maximum surface temperatures up to 1250°F.
-Designations are etched on the sheath to preserve accurate shape.
-Industrial heating elements arranged just beneath outside surface for maximum heat transfer, minimum core temperature and faster heating.
-Made in U.S.A.
-Where specified, units can be supplied liquid tight.
-Long, trouble free service. |
|
| The conical centraggi are mechanical members who allow to the precise centratura of slabs of the stamp or others members been involved in the transformation process. |
|
It is, with gravimetric measuring, the force of Spiroflux.
Our achievements many and are varied. They touch all the fields of the plasturgie until the agro-alimentary one, and they are systematically adapted to the particular need for the user (many been useful machines, flows, standards and many matters, rates, monitoring,...).
Today, all our centralized installations are managed by industrial automats.
They are conceived, marketed and installed by our teams.
And more and more, our customers delegate preventive maintenance to us, through annual contract.
The data-processing tool, there too, brings more and more possibilities of development by the supervision of the centralized installation, the communication with the CAPM, the filing and the edition of statistics of production, the monitoring of the process,... Spiroflux has many references on the matter, in France and abroad. |
|
During cross-head extrusion, the pre-treated pipe passes continuously through the die.
A vacuum is created between the coating material and the steel pipe so that the coating is drawn against the pipe on all sides as it leaves the die and bonds with the pre-treated pipe surface
|
|
The following features permit the economic manufacture of silicone injection molded articles of high quality both technically and optically:
- The CRS is supplied completely set-up. Standard and special gauges(supplier of nozzle spacings permit the individual usage of a CRS for several contour units even with different molded articles.
- Shorter set up times thanks to rapid clamping elements for simple, fast professional fitting of the contour units to the CRS.
- Fabrication of molded articles with reduced sprue is achieved by precisely defined thermal separation between the cooled CRS and heated contour unit.
- Reduced injection point marking thanks to needle valve manufacturer controlled feed system ensuring optimum quality of the molded articles.
- Closing of the fee orifice by means of the needle cock system prevents cross linking of the LSR (Liquid Silicon Rubber) in the sprue bush when the unit contour is at high temperature.
- Shorter cycle times thanks to the possibility of high temperatures of the contour unit and therefore variable vulcanization times for standard molded articles and particularly in the case of relatively large mould ed articles.
- Optimum balancing of the multiple CRS by regulation of the mass flow per cavity integral choke units.
- Minimum mechanical load on the liquid silicon rubber thanks to large cross sectional areas of the feed zones.
The single nozzle CRS is financially advantageous alternative to the multi nozzle CRS for the creation of models, prototypes and small runs. |
|
6 calibrating sleeve designs available for all areas of application with intensive cooling, dry inlet, water or spray ring for all resins, including PVC, PE, PP, ABS and nylon
|
|
| Spray cooling bath provides intensive cooling of the pipe |
|
Extremely stable vacuum and precise temperature control
Patented air-water-separation system
|
|
YVROUD is proposing any type of tanks needed for the cooling or the calibrating of pipes and profiles: calibrating units with or without vacuum, immersion or spraying cooling centers, relaxation tanks, pelletizing units ...
YVROUD warranties you:
- an adapted solution to your need.
- An assembled and tested equipment before delivery on site.
OPTIONS:
· Professional fan or manufacturer of air dryer.
· Collector tank.
· Add-on cooling unit with recycling water.
· Additional pumps.
· Electrical shifting on rails. |
|
American Maplan's Out of Line Vertical, In Line Vertical , High Performance and Calandrette® film and sheet systems offer a full range of extrusion solutions
High degree of versatility to suit every line design requirement
Inline systems can be combined with all automatic thermoformers currently available on the market
Our manufacturers of extruders are designed to accommodate a large processing range at high output rates with low energy consumption
Melt degassing for excellent film quality
|
|
CPI QUICK COUPLINGS FOR MOULD TEMPERATURE CONTROL
Straight-through standard profile CPI quick couplings
- Fast, automatic and reliable. Connect and disconnect with just one hand.
- 2 diameters (8 mm & 12 mm, full flow) offer maximum flow rates in a small body.
- Traight-through design eliminates all risk of scale buildup.
Applications :
- Mould temperature control on thermoplastic injection-moulding machines and zamak or aluminium professional die casting equipment.
- Cold water, refrigerated water or hot water circuits. |
|
- Quick and easy installation (even on existing molds).
- Return of the ejector plate is assured.
- Part ejector plate is assured.
- Coupling is obtained in any position, disconnecting is after the ejector plate is fully returned.
- Fast acting up to 30 strokes/minute.
- No wearing parts.
- Can be used on all injection machines equipped with hydraulic or mechanical ejection.
- Set-up time can be greatly reduced.
- Reduce noise on machines with mechanical knockouts.
- Especially suited for injection machines that do not have easy access to the ejector plate.
- Allows for center ejection to be tied in.
|
|
| The daters are members who, lodged in the part figure of the stamp, allow as an example to identify the article printed with the fabrication date (day, month and year). |
|
The Rapid Professional guillotine System speeds up the recycling of edge trimmings. Two guillotines, one for each trimmed edge, are incorporated into a system that continuously cuts edge trimmings coming directly from a sheet extrusion unit into small pieces. The guillotined pieces fall onto a band manufacturers of conveyor that transports them to a granulator.
Alternatively, the Rapid 20, 26 and 35 Series of manufacturer of granulators can be tailored to take care of edge trimmings. A Roll Feed System fitted on a granulator pulls in continuous strips of edging directly after they have been trimmed off from plastic sheets or foil coming from an extrusion line. |
|
This range of plug & play temperature control units achieves heating and control of water medium (up to 140°C) in a closed loop. The temperature sensor is placed in the water medium at the outlet of the Vulcatherm®.
Standard devices equipped with :
- an electrical heater : heating power capacity from 6 to 50 kW.
- a centrifugal pump : nominal flow rate from 1,2 to 10 m3/h.
- an expansion tank : capacity from 2 to 8 litres.
- a Pid controller with safety pressure and manufacturers of temperature sensors.
- an electrical cabinet (industrial power supply : 400 VAC TRI + Earth) with power control through electromechanical relays (6-10 kW) or through thyristors (from 14 kW upwards).
- an insulated unit with castors.
Vulcanic offers a complete range of temperature control units.
Medium : water or oil
Temperature: up to 300 ° C
3 modus operandi: only heating, heating and cooling with industrial water, heating and cooling refrigeration circuit. |
|
|
|
Equipment for plastics industry
