|
|
P-Sh-N-Ex
This anti-static bar is equipped with an integrated power unit, you do not need a high-voltage cable. This anti-static bar has been approved for use in certain hazardous environments (ATEX). The 5m long primary cable shall be connected to the mains voltage. A neon lamp can indicate that high voltage is present. Under certain conditions the P-Sh-N-Ex bar is capable of neutralizing the materials from a maximum distance of 200 mm.
|
|
Model 957Ex consists of a Meech 910Ex static eliminator bar mounted on to a linear air flow amplifier (air curtain). It produces a high speed, laminar beam of ionised air for long range static neutralisation and dust removal. It is available in a variety of lengths. The 910Ex Bar is BASEEFA approved for use in hazardous areas. (EXs IIA T6 - Zone 1 on 2). II 2 G Gas group IIA Temp Class T6
Features
Laminar air flow Reduces recombination of ions, increasing effective range
Easy maintenance Optimum performance and equipment life
High speed air flow Long range ionisation capability
Air amplifier Reduces compressed air consumption
|
|
|
|
|
|
The Model 935 Ionising Blower provides effective long range ionisation over a large area. Its versatility makes it suitable for a wide range of industrial applications. The Model 935 comprises an ionisation head and an integrated fan system. A high volume flow of ionised air is generated by blowing air through the ionisation head at the mouth of the unit. Ionisation is provided by powerful 915 bars, generating an ionised field to a depth of up to 2000mm. The 935 unit is powered by the Model 904 (see separate datasheet) and is available in both 110V and 240V versions. Patent No. ZL200530000279.5
Features
Variable fan speed (option) Air flow can be adjusted to suit specific applications
Easy, flexible mounting Can be mounted on walls, benches, ceilings etc to suit a specific application
Large footprint Effective over a large target area
Ionisation provided by 915 bars Powerful ionisation with very fast decay times
Filter media (option) Ensures only clean air impacts the target area
Removable polypropylene grille Easy access for regular maintenance of ionisation head
Available in 200mm length increments Flexibility to optimise performance for individual applications
High volume air flow Provides highly effective long range ionisation
Resistively coupled ionisation head Shockless operation
|
|
|
|
|
|
Single Anti Static Blower
H&O Single Ionising Air Blower is designed for the neutralization of the static charges which cause some serious problems. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Blower seperates air molecules to the positive and negative ions by the electric field it generates and transports them.
Any static charged product passed from the efficient distance of the Air Blower will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines.At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented.
Thanks to Air Blower which doesn't need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems. There is one fan in Air Blower for increasing ionization distance and supplying enough air flow. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. Blower filters should be cleaned occasionally.
|
|
|
Ionizing Air Blowers consist a static device and power source inside of housings of various shapes to create bi-polar ions. The blower acts as an extended range ionzier to move the ionization forward to charged surfaces and materials. Ionizing air blowers are ideal for solving static on plastic molded parts and webs.
|
|
|
The Meech Model 958 Sheet Separator system has been designed to allow efficient operation of automatic sheet feeders by eliminating static charges and separating the sheets with a controlled blade of ionised air. The Model 958 system comprises one or more full flow Meech ionising air curtains on adjustable brackets, which are mounted on the cross rod of the feeder. The Model 957 air curtains incorporate Model 915 static elimination bars, which are driven by a Model 904 power supply (refer also to Models 904, 915 and 957 data sheets). The air supply should be equipped with a pressure regulator and 5 micron filter.
|
|
Ionized air blower for static neutralization
ELCOWA's ECOBLOWER 350-C has been designed to efficiently remove static charges from a distance. It is built in a robust painted steel cabinet enclosing the high voltage power supply, tangential fan, and a blowing nozzle in which three shockless ionizating bars. The pivoting mounting bracket makes it easy to install and adjust. The ionization blower ECOBLOWER 350-C is a compact, self-contained unit ready for service. As the high voltage power supply is incorporated into the blower, there is no high voltage cable nor remote power supply, reducing electrical hazards.
|
|
|
Where air is required to affect static removal at a distance and compressed air is not available, the Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar.
|
|
|
|
|
|
Dual Anti Static Blowers
H&O Single Ionising Air Blower is designed for the neutralization of the static charges which cause some serious problems. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Blower seperates air molecules to the positive and negative ions by the electric field it generates and transports them.
Any static charged product passed from the efficient distance of the Air Blower will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines.At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented.
Thanks to Air Blower which doesn't need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems. There is one fan in Air Blower for increasing ionization distance and supplying enough air flow. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. Blower filters should be cleaned occasionally.
|
|
|
Plastics attract dust due to static electricity. The dust particles stick firmly to the surface, which makes it difficult to remove them. Due to their configuration, numerous plastic products have to be neutralised from a distance. For this purpose, SIMCO has developed ionising air blowers. The emitter points of the anti-static bar ionize the air which is blown towards the electrostatically charged object. The part is then neutralised by the ionized flow.
|
|
EXAIR static eliminators neutralize static electricity charges in a wide variety of industrial processes. Anti-static products eliminate static cling that causes dust attraction, jams and tearing. Materials such as paper, plastic and textiles normally contain an equal number of positive and negative charges - that is, they are electrically charged. This static charge causes the following problems:
* Dust clinging to product
* Product clinging to itself, rollers, machine beds or frames
* Materials tearing, jamming or curling
* Sheet feeding problems
* Hazardous sparks or shocks
|
|
Static elimination air gun
The static eliminating air gun TISP-N is an efficient tool to remove dusts on plastic and other insulating surfaces, combining ionization effect and a powerful air blast. Comfortable, compact and lightweight, the TISP-N has been designed for an intensive use. The width of its nozzle makes it easier to treat larger areas. The TISP-N is recommended to neutralize static charges and remove dust manually off parts before such operations as painting or metal plating
|
|
The Meech Model 954 is a hand-held ionising air gun for neutralising static charge and removing dust contamination in a wide range of industrial processes. The ergonomic, lightweight design of the 954 provides simple, quiet and effective operation. The 954 is powered directly from the Model 904 (refer to separate datasheet) and requires a clean, dry compressed air supply.
Technical Characteristics
Max pressure 7 bar (Typical usage 2 bar)
Operating voltage 7kV
Max temperature 85°C
Construction Machined aluminium outer body and with PTFE inner sleeve.
Weight 950 g including 3 metres of cable.
Cable 3 metres of H.T. cable supplied as standard. Longer lengths can be specified when ordering.
|
|
Ionized Air Gun is a hand-hold air gun designed to neutralize the static charges and removing dust particles from the surfaces in the industrial applications. High technology used in design can produce more efficient results for static electric problems even in high-speed applications.
It provides high performance and efficient ionization with fast discharging time. Gun seperates air molecules to positive and negative ions by the electric field it generates and transports them.
|
|
|
Ionizing air guns neutralise static charges on several materials and clean the surface using ionized compressed air. Neutralising the static charges makes it easier to blow-clean the surface and prevents dust and dirt particles from being reattracted. The compressed air used for this purpose must be free from oil and water. The guns are connected to a power unit which supplies the required high voltage.
|
|
Ionizing Air Guns
Ionizing air guns are excellent tools to enhance the cleaning of products that hold particles to them due to electrostatic attraction. By breaking the bond of static, the compressed air or nitrogen driven, ionizing air guns provide impact pressure to dislodge stubborn particles that reduces yields, especially in Medical Packaging, Electronics and Plastics Fabrication.
|
|
Air-assited handheld gun eliminates static charges while cleaning the surface.
FEATURES:
- Buit-in high voltage transformer can be connected directly to 12V DC or the supplied 12 V DC PowerPack.
- Cable/air hose combined connection from top or bottom of gun
- Integral holder allows the gun to be counter-balanced, preventing the gun from being damaged
- Stainless steel electrode housing keeps the electrodes free from bearkage and dust/debris build-up
- Trigger sensitivity and light weight does not cause operator fatigue
- Built-in air hose eliminates the eed to install a seperate air line
- Integral grounding connection insures operator safety from shock
|
|
The Meech Model 955 is a hand held ionising blow gun for removing static charges and dust in a range of industrial applications. The portable Model 955 has been designed to provide efficiency in both cost and performance. An electrical centrifugal fan provides high velocity air flow, avoiding the need for a costly compressed air supply. Ionisation is provided by titanium emitters located in the nozzle of the gun, powered by a high voltage DC source. The 955 requires just a standard single phase 240V supply, thereby making the unit fully portable.
Features
Small and compact. Easy to locate and install in confined spaces.
Only maintenance requirement is periodic cleaning around emitter pin. Easy maintenance and minimum downtime.
Flexible knuckle trunking extension Delivers ionisation precisely where it is needed. Effective in "difficult to reach" places.
"Stay put" knuckle trunking. Enables simple and quick installastion.
Rapid decay times Highly effective in sheer feeder applications.
|
|
|
The blowing anti-static bar with curtain of standard air ELCOWA ECOFLOW, allows by the power of its air blast ionized the neutralization of the electrostatic loads. The association of a capacitive electrode ECA 88 B and of a slope of blowing to laminar flow creates a curtain of ionized air. This one allows, by its power and its strong ionic concentration, the neutralization of the electrostatic loads remotely and the expulsion of the parasitic particles.
|
|
957 - Ionising Air Curtain
The Meech Model 957 Ionising Air Curtain is an extremely versatile unit that provides effective static neutralisation and dust removal in a wide range of industrial applications. The unit comprises a Model 910 bar mounted on to a linear air flow amplifier (air curtain) to produce a high speed, laminar beam of ionised air. The Model 957 requires a compressed air supply. High voltage input is provided by a Model 904 power unit
Technical Characteristics
Operating voltage 7kV
Maximum temperature 85°C
Weight Approximately 1.1Kg per metre length
Construction (air curtain) Extruded from aluminium
Air consumption 112 litres/min at 5 bar pressure per 25mm of air curtain length (4.3cfm at 80psi per inch length)
|
|
|
|
|
|
Static Eliminator - Air-Blade Ionizer:
The Standard Air-Blade Ionizer combines the superior designed Standard Air-Blade™ Air Knife with a quality static bar made by Haug, a world leading static control manufacturer. Charges can be eliminated quickly, even over large distances and surface area.
The Standard Air-Blade Ionizer uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.
Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For washdown applications (such as pharmaceutical areas), even a washable model is available at extra cost.
All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).
Features:
- Connections on the back or ends
- It flows from end to end (full flow).
- Stainless steel models are available for high temperature and corrosive models.
- Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage.
- Patented connectors with the ground intrinsic to the cable design.
- Instant ON/OFF with no moving parts.
- Repairable Power Supply with a two year warranty.
|
|
A SIMCO anti-static bar with airknife combine the effects of air amplification and ionisation to produce a high-velocity ''sheet'' of ionised air (amplification ratio as high as 25:1). This combined effect can be used for static neutralising and dust removal in a single operation, for instance in the automotive finishing, printing, packaging, plastics and textile industries. The airknife is very compact and does not have any moving parts. SIMCO anti-static bars produce an electrical field which causes air molecules to break down into positive and negative ions. These ions are
picked up by the high-velocity airflow produced by the airknife and propelled into the work area where they neutralise the charged surface or product.
|
|
|
Ionizing Air Knives deliver a curtain of ionized air over a distance to both large and small parts that need cleaning or neutralizing. SCI provides both a standard and a high output airknife with ionization. The AK1200 is our standard ionizing air knife. The AK 2200 is our hi-output ionizing air knife.
|
|
JetStream Ionising Air Knife System
Unbeatable performance, unrivalled efficiency
The Meech JetStream ionising air knife system is more than just a piece of equipment. It's a world-beating solution to contamination removal. Capable of being used in a diverse range of applications - both large and small - JetStream's unique technology provides ultimate performance combined with outstanding energy efficiency.
World leaders in Static Control and Air Technology
No-one knows the specialist fields of static control and air technology better than Meech. The practical benefits can be seen at work in JetStream. Unique design characteristics such as integral ionising bars, deliver important benefits - including enhanced performance and extended lifespan - that help you to maximise the return on your investment.
|
|
|
The Meech Model 942 Flexi Nozzle is a small, lightweight in-line ionizing air nozzle with the discharge outlet extended by flexible knuckle trunking. The 942 Flexi Nozzle is designed for use with low pressure compressed air lines and for applications requiring the removal of electrostatically attracted dust and/or static neutralization. It is particularly suited to applications on sheet feeder and delivery systems. The 942 Flexi Nozzle is connected to a suitable high voltage power supply (the Meech Model 905). The addition of flexible knuckle trunking enables the system to deliver ionized air with accuracy into "difficult to reach" places, where conventional systems would be ineffective or impossible to install.
|
|
|
|
|
|
261F - Flexi Nozzle
The Meech Model 261 Flexi Nozzle is a small, lightweight ioniser with the discharge outlet extended by flexible knuckle trunking. The 261 Flexi Nozzle is designed for use with Meech Pulsed DC Controllers and is suitable for installation into machinery and equipment in both industrial and electronics environments. It is particularly suited to high speed applications such as sheet delivery systems. The addition of flexible knuckle trunking enables the system to deliver ionized air with accuracy into “difficult to reach” places, where conventional systems would be ineffective or impossible to install.
Technical Characteristics
Dimensions - body 30mm diameter x 66mm long
Dimensions - trunking (standard) 118mm long
Air fitting 6mm diameter push fit
Max air pressure 7 bar (100) psi
Typical pressure 1.5-3.0 bar (20-40 psi)
Emitters Machined Titanium
Input voltage ±8kV DC nominal
Ion balance Typically ±10V at 20Hz at set up
Decay Time (1,000V to 100V) Typically < 0.5 seconds at 150mm and 2 bar
Ozone < 0.01 ppm
|
|
|
|
|
|
NZK30 Ionizing Nozzle
Static Control Nozzles are designed to neutralize the high static charges for industrial applications in which anti static bars can not be mounted. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Statik Control Nozzles seperate air molecules to positive and negative ions by the electric field it generates and transports them with its air nozzles.
Any static charged product passed from the efficient distance of the nozzle will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines. At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented.
Thanks to static control nozzles which don't need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems. Even if the user touches the needles of the nozzle, each end of the bar are connected capacitively to high voltage so user won't be exposed to a shock which will harm human health. Air which will be applied to the system by the compressor should be clean and dry. Because of its an ergonomic and light structure, nozzle has a simple,quiet and efficient way of operating.
|
|
|
Ionizing air nozzles produce a high-velocity ionized air flow which simultaneously cleans and neutralises static charges on parts and materials. The nozzles operate on compressed air and provide a pinpoint ionized air source for being used in critical cleaning and/or static neutralising. Nozzles can be fitted and installed in many configurations to meet specific requirements. SIMCO power units supply the high voltage necessary for operation.
|
|
Ionizing Air Nozzles
Ionizing air nozzles work off compressed air to provide a source of cleaning to surfaces in the manufacturing process. Nozzles can be a single unit mounted on a bench or equipment or in series with many nozzles to reach tough areas or cover wide webs and parts.
|
|
The Meech Model 913 Flow Tube is designed to neutralise static charges on materials in handling and conveying systems. The Model 913 Flow Tube incorporates in-line ionisation, which eliminates material clinging and clogging in ducting systems due to static charges. The 913 Flow Tube comprises a stainless steel or PVC tube fitted with Model 910 static elimination bars, which are driven by a Model 904 power unit. Please refer to the separate 910 and 904 product data sheets for more information on these items. The 913 Flow Tube is available in a range of diameters to suit the specific application.
Features
Available in stainless steel or PVC Can be matched to existing ducting materials
Available in a wide range of standard diameters Easy to incorporate into existing ducting systems
Highly effective neutralisation of static charges Allows product to flow freely, thereby preventing clogging and improving productivity
Inductively coupled bar design Shockless operation
|
|
|
|
Electrostatic generators, Antistatic bars, Air ionisation...
