|
|
|
The Meech Model 904 is a constant voltage power supply, designed to provide a 7kV source for Meech AC ionising equipment. It is adjustable to operate at 100-120v or 200-240v input voltages and is available in either 50Hz and 60Hz versions to suit local conditions. The 904 utilises a modified shape of output wave form and is uniquely designed to allow automated manufacture for increased reliability and extended product life.
|
|
Static neutralizating bars by ELCOWA
These ionizating bars are designed to remove static charges on travelling materials. They are used on dielectric materials such as plastics, paper, textiles, wood, etc. The electric field generated by the bars creates a high concentration of ions which cancels the undesirable effects of static charges accumulated on the surface of materials. Free from these charges, the material is no longer subject to such behaviours as attraction, repellance or sticking effects. The capacitive coupling design of our bars prevents high voltage from being directly applied on the needles. Therefore, they are shockless and safe for the user
|
|
|
|
|
|
The Meech Model 976 Pulsed DC Bar is unique and has been designed to provide highly effective long range ionisation up to distances of 600mm. It is shockless and is easily maintained. The Model 976 can be powered by any of the range of Meech Pulsed DC Controllers (refer to separate datasheets). Patent No. ZL200530000277.6
Features
Air boost option Enhanced range (up to 1200mm) and speeds
Easy wipe casing Reduced dust contamination, easy maintenance & sustained performance
Sharp titanium emitter pins Reduced pin contamination & longer effective life
Unique profile & emitter layout Reduced ion recombination & enhanced performance
Bar inter-connect option Installation of bars in-line to minimise HT cabling
Unique "T" channel mounting system Simple & quick installation
Removable & replaceable emitter pins Reduced downtime for maintenance. System efficiency maintained without total replacement and life of bar is substantially lengthened
Resistively coupled emitter pins Shockless, thereby enhancing operator safety
Fast, long range performance (up to600mm without air assistance) Flexibility in positioning. Effective at fasterweb speeds.
|
|
The Meech Model 915 Shockless AC Bar
The Meech Model 915 AC Bar has been designed to meet the most arduous of static elimination problems, including those encountered in high speed applications. The powerful performance of the Model 915 provides very fast decay times and effective ionisation up to distances of 150mm. It is shockless and is easily maintained. The Model 915 is powered by the Model 904 (refer to separate datasheets). Patent No. ZL200530000276.
Technical Characteristics
Dimensions 18mm x 42mm x length (up to 4000mm)
Weight Approx 1,100gms per 1000mm length
Operating voltage 4.5-7.0kV
Operating current Less than 5 mamps
Maximum operating temperature 60°C
Cable 2 metres shielded in flexible conduit; longer lengths can ordered
Construction Anodised aluminium and fire retardant PVC extrusion
Emitters Titanium
Mounting Two M4 x 20mm studs into “T” slots
|
|
|
Nex Flow™ uses quality Haug static bars rather than cheap products because Haug static bars have been proven to last in difficult environments. The most fragile part of any ionization system is the static bar and Haug bars have proven themselves against others to have be rugged.
|
|
|
|
|
|
H&O Anti-static bar blower with compressor connected to air apparatus is designed to neutralize the static charges which causes problems in long distances. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Anti-static bars seperates air molecules to positive and negative ions by the electric field it generates and transports them with its air apparatus.
Any static charged product passed from the efficient distance of the bar will draw the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines. At the same time electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented. Thanks to anti static bars which don’t need any calibrations and can be cleaned and cared easily, machines will perform hygienic, safe and high quality production with high performance without problems.
Even if the user touches the needles of the bar, each end of the bar are connected resistively to high voltage so user won’t be exposed to a shock which will harm human health. Air which will be applied to the system by the compressor should be clean and dry. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. H&O Bars can be produced in different lengths in order to meet application needs.
|
|
|
|
|
|
Blower Driven Air Boost Bar
H&O Anti-static bar with air apparatus connected blower is designed to neutralize the static charges which causes problems at long distances. High technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Anti-static bars separate air molecules to positive and negative ions by the electric field it generates and transport them with their air apparatuses.
Any static charged product passed from the efficient distance of the bar will attract the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines.At the same time, electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented. Thanks to anti static bars which do not need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems.
Even if the user touches the needles of the bar, each end of the bar are connected resistively to high voltage so user won't be exposed to a shock which will harm human health. Air which will be applied to the system by the blower should be clean and dry. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. H&O Bars can be produced in different lengths in order to meet application needs.
|
|
|
|
|
|
KDA 75 Anti Static Bar
H&O Anti-static bar high technology used in design can produce more efficient results for static electric problems even in high-speed applications. It provides high performance and efficient ionization with fast discharging time. Anti-static bars separate air molecules to positive and negative ions by the electric field it generates and transport them with their air apparatuses.
Any static charged product passed from the efficient distance of the bar will attract the opposite charged ions and neutralize the product. This will prevent the sticking of products to other products or parts of machines. At the same time, electrical shocks, explosions, fire danger and dust attraction of which is caused by static electric will be prevented. Thanks to anti static bars which don?t need any calibrations and can be cleaned and cared easily. Machines will perform hygienic, safe and high quality production with high performance without problems.
Even if the user touches the needles of the bar, each end of the bar are connected resistively to high voltage so user won?t be exposed to a shock which will harm human health. Air which will be applied to the system by the blower should be clean and dry. System can be mounted to places which are hard to reach by the connection apparatus that is provided on the system. H&O Bars can be produced in different lengths in order to meet application needs.
|
|
SIMCO anti-static bars generate an electrical field through a high voltage on a row of ionizing emitter points. This causes the air molecules in the vicinity of the bar to break down into positive and negative ions. Because opposite charges attract, any charged material passing near the bar will attract ions until the charge on the material is neutralized. The materials will no longer be attracted to each other or to the machine parts. Attraction of dust, explosion or fire hazards and electrical shocks to personnel caused by static discharge are avoided.
|
|
A high effeciency industrial static eliminating system for neutralising static charges form a distance without air.
FREATURES:
- Allows mounting of the bar up to 150mm away, or on webs at speeds up to 1000 m/min.
- Open-channel design for easy cleaning, resulting in longer bar life.
- Insulated bar cable, for easy cable routing along machine frames
- Easy snap-on/snap-off holders allow for easy removal of the bar once it has been mounted
- Shock-less bar design and integral bar/PowerPack grounding prevents operator shock
- Service friendly Powerpack is dust & debris-free
|
|
|
|
|
|
The Model 212v2 Benchtop Ioniser is a compact unit which complements the Meech Series 200 product range. The Model 212v2 provides excellent work station coverage and a high level of ESD protection. It has been specifically designed to meet the demanding performance requirements in applications such as: ·Semiconductor manufacture · Electronics assembly & testing · Test and re-work · Optics, contact lenses & fibre optics · Medical device manufacture & packaging · Wave soldering
Features
Removable pins Easy to clean and replace. Minimum maintenance downtime.
Balance ionisation (typical) +/- 10V Prevents possible ESD damage in sensitive electronic applications, reduces scrap and saves on replacement costs.
Two fan speed settings Can be set for optimum operator comfort and ionisation range.
Dirty pin indicator and audible alarm Particularly important in applications where balanced ionisation is key to prevention of ESD damage to components. Also, informs the operator when maintenance is required (emitter pin cleaning).
Small footprint Takes up little room, allowing more space for operators' work activity.
|
|
|
The Model 271 Flexible Ion Nozzle is a compact, "hands free" ioniser, designed for repetitive cleaning tasks. It is powered by the Model 233v3 Pulsed DC Controller. It is suitable for electronic and cleanroom environments and is quick to install and easy and safe to use.
|
|
The Model 912 range of circular static eliminators is based on the popular Model 910 shockless bar. The inductively coupled design provides powerful static neutralisation and completely shockproof operation. The Model 912 is powered by the Model 904 (refer to separate datasheet) and is suitable for applications where 360° neutralisation is required
Features
- Shortcircuit-proof Accidental earthing of one electrode allows the remaining electrodes to continue to operate
- Powerful ion production Fast charge decay times
|
|
|
The Estaquick is a quick disconnect electrostatic air atomizing spray gun. The spray head is lathered directly in Peek material to make it robust and compatible with all paint materials available in the industry. The gun disconnects for service in less than 5 seconds thanks to an easy 90° turn mounting bracket.
|
|
|
The Nordson Sure Coat powder spray system provides a solution with patented Select Charge technology, which allows you to choose the ideal electrostatic parameters for your particular application. With it, you can achieve a level of coating quality, efficiency and consistency.
|
|
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
|
|
|
992v3 - 30kV Static Generator
The Meech Model 992v3 30kV Static Generator creates a controlled level of static charge to impart temporary bonding between materials, at least one of which is insulative. The 992v3 provides a high voltage output adjustable over the range 0-30kV or a constant current that can be adjusted between 0 and 500µA. The selected output voltage or current is shown on a digital display. The adjustability of the output voltage and current enables the unit to be used in a multitude of applications and with a variety of materials. The 992v3 is used in conjunction with the Model 993R sparkfree generator bar (refer to separate datasheet) and is available in either negative or positive output polarity versions.
Technical Characteristics
Output voltage 0-30kV
Output polarity Dedicated positive or negative
Maximum Output current 0 to 500µA
Power input requirements Mains supply of 85 to 265V, 47 - 63Hz
Maximum temperature 60 ºC
Dimensions 95mm x 180mm x 235mm (HxWxD)
Weight 3.25Kg
Construction Painted steel enclosure
|
|
|
HVDC 2000 Charging Generator is suitablefor high voltage applications in industry and for DC powered bars. The unit output voltage and protection current value are set digitally by using the front panel. The output voltage can be set between 3kV-20kV and current can be set between 0-740uA. The power supply includes remote on/off and remote voltage andjustment settings and is available as positive or negative.
|
|
|
SIMCO Chargemaster systems are excellently suited for temporarily bonding materials; adhesion between the material surfaces is brought about by generating an electrostatic charge. As a result, production processes can often be simplified and accelerated. A system consists of a DC highvoltage generator and one or several charging electrodes. The generator generates the high voltage for the high voltage points in the electrodes. The high voltage points produce ions to charge the materials, which then adhere to each other or to other surfaces electrostatically. Highfrequency switching technology is used in the generators. This technology ensures a consistent output voltage at a preset value, until overloading. The generators are electronically current limited and protected from spark-over. Features of the modern design include the control panel, which has membrane switches and rotates through 180°.
|
|
The Meech Model 993R is a high performance Generator Bar for use with the Meech range of 30kV and 50kV high voltage DC static generators. Resistively coupled emitter pins deliver smooth, controlled pinning whilst spark free operation avoids tripping out on intermittent applications.
Features
Resistively coupled emitter pins Power is delivered in a smooth, controlled manner. Spark free operation. Eliminates incidences of flash over often experienced with bars directly coupled to the high voltage supply. Greatly improved operator safety.
Removable emitter pin option Optimum performance can be maintained. Life of the bar is substantially lengthened.
|
|
|
|
|
|
KDA 75 04 DC Charging Bar
H&O charging bars are used in applications in which the materials should be sticked to a place or each other. Many production steps require sticking of components or materials to each other. This sticking shouldn?t leave marks and damage surfaces of the products when the materials are seperated. High resistant materials such as paper and plastic can be bonded to conductive surfaces without using glue.
Electrostatic charging which is provided by ionization, is a charger system consists of a charging generator and a charging applier. Charging bars are designed to execute a specific charge. Their needles are resistively connected to high voltage so don?t cause sparks and provide a secure operation.
n case of a positive and negative polarity, the voltage of power supply should be adjusted. For static charge applications, charging bar is installed to a distance of 10-20mms. Connection channels placed in the back of charging bars provides an easy and safe installation with the plastic connection apparatus that has dimensions of M8x60. For proper operation, each static charged material should be neutralized with the most appropriate ionization system before they are bonded.
|
|
|
SIMCO offers a variety of charging bars and electrodes, depending on the specific applications and conditions. These bars are connected to a DC high-voltage generator. A strong, ion-saturated electrical field around the single polarity high voltage points forces the material to a reference earth. The material is charged by the ions. Being attracted by different polarities, the surfaces temporarily cling together. There are various methods of temporarily charging materials electrostatically, using a SIMCO Chargemaster system.
|
|
|
StaticBond Charging System as a process tool provides the means of bonding materials together in many applications that require a temporary bond. Static charge is induced onto a product to keep the product intact as it travel along a conveyor or for manual and automated In-Mold Labeling/Decorating lines on molding machines. Applicators are in the form of a Spot Charger or a Charging Bar in lengths that are specific to the application.
|
|
The 995 Edge Pinning Claw is a powerful pinning head intended for use on cast-film lines. Pinning the edges of the cast film to the chill roller prevents necking of the film. Resistively coupled titanium pins deliver spark free pinning. The 995-CLAW can be powered from either our 30kV or 50kV range of 992v3 generators.
The 995R range of Pinning Heads have been designed for use with all Meech static generators*. All can be operated at up to 50kV and being resistively coupled are near shockless in normal operation.
*Three sizes cover widths from 70, 110 and 150
The Model 995v3 Flexible Pinning Head is designed for use with the Meech range of high voltage static generators. Resistively coupled emitter pins deliver smooth, controlled pinning whilst spark-free operation avoids tripping out on intermittent applications. The flexible trunking permits accurate pinning of non-conductive materials.
mm
|
|
ITW Ransburg expands the Vector line of manual electrostatic spray guns with the introduction of the Vector AA90
The Gun combines superior airassisted airless atomisation technology with powerful electrostatic features, all in one gun. This integration results in a comfortable, lightweight gun with superior spray pattern characteristics, unmatched 'on gun' fan pattern adjustability with extraordinary high transfer efficiencies.
|
|
Vector SOLO
Our World Famous Electrostatic Technology comes up with a new Cordless Gun that stands out – And Alone – in the liquid coating Industry.
Vector Solo is the result of years of work to develop a cordless electrostatic gun worthy of the Ransburg name and the quality tradition we’ve upheld world wide.
This new low pressure spray gun represents an extraordinary accomplishment
representing significantly improving paint atomisation, transfer efficiency, durability and operator comfort with complete compliance with European Environmental Legislation.
• Cordless portability and convenience
- no generators or controllers
• Superior atomisation and transfer efficiency
• Lighter weight with superior ergonomic balance
• Quick and easy to set up „straight from the box“
• Lower running costs and maintenance.
|
|
The Vector Solo AA combines airassisted airless technology with proven atomization in a portable, cordless model. With superior Ransburg electrostatics, this gun delivers advanced spray pattern characteristics, unmatched pattern adjustability and extraordinary transfer efficiency.
Solo’s cordless design increases flexibility. Operators have a greater range of movement to achieve consistent applications. The superior
ergonomic balance improves user comfort and lessens fatigue for an
increase in productivity.
Vector Solo AA’s efficiency, convenience and versatility helps to lower your bottom line.
|
|
|
|
|
|
SPRAYMIUM the new electrostatic paint gun from SAMES and KREMLIN
SPRAYMIUM is a paint gun combining ergonomics, reliability and performance of application. It is dedicated to companies wishing to improve their application process by facilitating the work of the operator.
SPRAYMIUM combines Innovation and Experience in providing access to low pressure and high pressure spraying technologies, the qualities of AIRMIX and VORTEX ® which are guarantees of high quality for industrial finishing.
All components offer a technological breakthrough leading to an optimization process of formal painting.
SPRAYMIUM offers controls on the rear of the gun from where the operator can, with a single hand, choose from 3 pre-set electric settings and from there the flow management painting is done instantly. These electric settings are modifiable by the operator in order to better adapt to the types of items to be painted.
A pressure sensor integrated into the gun is used to know in real time pressure for a very precise adjustment of the spraying and perfect repeatability on a daily basis.
This is a patented novelty, exclusive to SPRAYMIUM.
SPRAYMIUM means also the dedicated control module SPRAYBOX, extremely friendly, easy to use, based on simple icons and easily understandable. The module can work immediately with the application programs preset. Of course, the operator can adjust these programs to their needs easily thereafter.
|
|
The Meech Model 915Ex has been designed to extend the exceptional performance and other benefits of the 915 AC system to classified hazardous environments. It is particularly suited to coating, laminating, finishing and gravure printing applications. The 915Ex is certified by Baseefa to comply with Article 9 of the Council Directive 94/9/EC (ATEX). EC Type Examination Certificate No. : Baseefa04ATEX0347X II 2 GD EEx m Gas Group IIA, Temp Class T6 (T85°C) T amb -20 to +35 Deg C. (IP65)
Features
"T" channel mounting system Simple & quick installation
Sharp titanium emitter pins Reduced pin contamination & longer effective life
Slim profile Can be installed in restricted places
Powerful, intense ion production Very fast decay times and effective at faster web speeds
Easy wipe casing Easy maintenance, sustained performance and reduced machine downtimes
Resistively coupled emitter pins Shockless, thereby enhancing operator safety
Effective at distances up to 150mm Flexibility in positioning
|
|
976Ex - Hazardous Area Pulsed DC Bar
The Meech Model 976Ex is unique and has been designed to extend the exceptional performance and other benefits of the 976 Pulsed DC system to classified hazardous environments. It is particularly suited to coating, laminating, finishing and gravure printing applications. The 976Ex is certified by Baseefa to comply with Article 9 of the Council Directive 94/9/EC (ATEX). EC Type Examination Certificate No. : Baseefa04ATEX0348X
Technical Characteristics
Dimensions 50mm x 50mm x length (up to 4000mm)
Weight 400gms per 300mm length
Operating voltage Up to 10kV DC
Operating current Less than 50 mamps
Cable 5 metres shielded in flexible conduit; longer lengths can be ordered
Construction FR ABS extrusion
Emitters Titanium (replaceable)
Mounting M4 x 20mm studs into %u201CT%u201D slots
|
|
|
|
Electrostatic generators, Antistatic bars, Air ionisation...
