|
|
Base to bury for lodging Parky® AR580.
Characteristics
of the base Rubber from king cycling.
Agglomerated of grain mixture of rubber (SBR) and from poliuretanico binder.
Lowest emissions of CO2 during the production process.
Elevated technical qualities and performances.
High resistance to the usury and the atmospheric agents (ices and beams UV).
Drenante ability.
Weight max 50 Kg. (± 5%).
Density max 1 Kg. /dmc.
I use: parking on private area sluice to
public transit.
I pack in cardboard characterizes them
|
|
MANUAL SALVAPARCHEGGIO PILOMAT PARKY AR 580
Device for the protection of the parking, motor vehicle on private area sluice to the public transit.
Construction in elettro-galvanized steel tubes.
Cap of protection on the foot of implantation in steel elettro-galvanized realized in POLYAMIDE (NYLON) loaded with glass fiber "FIBER GLASS", resistant material many - new and searched design - rounded off forms.
Block automatic rifle to the manual return in vertical position.
Possibility of closing also in lowered position.
Certifyd product TÜV.
Anticorrosion treatment elettro-galvanizing
System of closing Cylinder European profile
Dowels to expansion (if the installation place uses allows some it)
|
|
MANUAL SALVAPARCHEGGIO PILOMAT PARKY AR 600
Device for the protection of the parking, motor vehicle on private area sluice to the public transit.
Construction in elettro-galvanized steel tubes.
Cap of protection on the foot of implantation in steel elettro-galvanized realized in POLYAMIDE (NYLON) loaded with glass fiber "FIBER GLASS", resistant material many - new and searched design - rounded off forms.
Block automatic rifle to the manual return in vertical position.
Possibility of closing also in lowered position.
Certifyd product TÜV.
Anticorrosion treatment elettro-galvanizing
System of closing Cylinder European profile
Dowels to expansion (if the installation place uses allows some it)
|
|
Invented in 1984 by Urbaco, Mechanical Retractable Bollards are the ideal solution for a wide range of varied applications, including restriction of parking spaces, reservation of site for deliveries, regulation of urban flows and security for public buildings or private residences.
The sixth generation of mechanical retractable bollards is the result of over 20 years of continual research and development. Each bollard consists of three structural elements (box, cover and moulded bollard head), and is supplied with a key matching the imprint selected (see examples below). The chosen site must be out of the usual passage of vehicle wheels.
Mechanical Retractable Bollards are set in motion with a key that unlocks the mechanism. A push on the bollard's head will make it sink into the ground; locking in the retracted position is automatic. A simple turn of the key will make the bollard rise back by itself and lock in the upward position.
|
|
Rising barrier Manual/Industry tertiary
* Great robustness
* Balanced boom
* Positive locking pin for high and low positions
* Up to 8 meters
* Wild range of options and accessories
|
|
|
|
|
|
MANUALLY OPERATED RISING BARRIER MG19
The MG19 has been developed for use in locations that require barriers up to 18 feet in length but do not have any provisions for electrical supply. The MG19 utilizes cast iron counterweights to balance the gate to the point where it can be easily opened with one hand. Locking rings may be fitted with pad or combination locks to secure the arm in either the raised or closed position.
POSSIBLE OPTIONS
Standard tip support for arm length over 15 Feet.
Lockable tip support.
Octagonal "STOP" sign in one or two directions.
CHARACTERISTICS
Net weight: of a 6m-arm barrier: 146 Kg.
Arm length: min. 2m-6.5ft., max. 7m-19ft.
Overall dimensions: see below.
DESCRIPTION
Vertical posts made of tubular steel with bracket for mounting.
Barrier arm made of round tubular aluminum
Arm is white with red reflecting stripes on both sides.
Pivot assembly made of flat steel profiles, mounted on steel rotating shaft with arm fixing brackets.
Sliding cast iron counterweights for adjustable arm balancing whatever the arm length
Padlock fixing points for locking arm in closed or open position.
Tip support for arm length of 5,01m (16 Feet) and longer (optional for arm up to 5m).
|
|
Motorized harrow PIKOSOL ULTIMA RATIO is designed to stop Net any vehicle travelling.
Its characteristics are impressive:
Each spur weighs 4.20 kg for a diameter of 32 mm and is virtually unbreakable.
The angle of attack of each spur is calculated to allow a penetration in metal.
The spurs are isolated of 134 mm what makes it possible to undoubtedly shred the two nose gear wheels (tire + rims) of any vehicle.
The height of striking of the spurs can be regulated between 325 and 425 mm, which guarantees a minimum of 8 spurs driven by bottom of case.
The spurs rise in less than 1 second.
|
|
Bar Barrier
Dimensions: 2.5m x 1m
A low-level pedestrian bar barrier complete with hook fastening and fixed metal feet.
|
|
Pedestrian Gate
Anti-climb gates, available within 3.5m fence panel, or as a separate 1m gate.
Temporary Fencing : A range of Anti-Climb Temporary Fence Panels, to suit all budgets and security requirements.
|
|
An innovative Came idea to reserve one's parking space, in any setting, whether residential, industrial or collective. It allows you to open and close the barrier directly from the car using a remote control.
Application contexts:
Apartment blocks
Workplace
Technology:
24V operator
|
|
|
|
|
|
The BORNOSOL can be regarded as belonging to urban furniture; it makes it possible to control or prohibit the circulation of any type of vehicle.
Its operating processes, hydraulics or tire, put it at the shelter problems involved in the water infiltration. Equipped with inductive sensors, it is completely sinkable.
Its stud "anti-slicing" is an additional advantage in harsh environment. In addition, it is a system intended to make failure with the vehicles rams like resisting the accidental shocks.
The BORNOSOL comprises a simple and robust mechanism, and its automatism makes it possible to easily control it to any existing system or in project.
Its communicating interface makes it possible to you to reach remote maintenance and the telecontrol in order to still increase the safety of the exploitation.
The BORNOSOL makes it possible to constitute hoppers of safety associated with a management by badge readers, controllers biometric, readers of number plates...
Of new design, the BORNOSOL can be immersed without its operation being faded.
The BORNOSOL respects standard NF P98-310.
|
|
PILOMAT@ PASS 127/P-800A IRON PAINTED
Cilinder: steel mode FE37 painted anthracite
Cilinder Height: 800 mm.
Cilinder Diameter 127 mm.
Cilinder Thickness: 6
Moving Speed: 10 cm./s.
Manual neutral pulling: yes
Safety pressure switch: yes
Connection line to SP station: 10 mt.
Hydraulic pump: yes
Housing frame: yes
Counter-frame to be walled in: yes
Category Retractable Bollard - Retractable Bollards
|
|
PILOMAT@ PASS 220/C-600A STAINLESS STEEL SILKING
Cilinder: stainless steel AISI 304 painted anthracite
Cilinder Height: 600 mm.
Cilinder Diameter 220 mm.
Cilinder Thickness: 4
Moving criteria: Pneumatic
Moving Speed: 5 cm./s.
Connection line to SP station: 10 mt.
Housing frame: yes
Counter-frame to be walled in: yes
Blinking lifghting point: yes
Moving cylinder head: checkered plate
Category Retractable Bollard - Retractable Bollards
|
|
PILOMAT@ PASS 220/C-600A IRON PAINTED
Cilinder: steel mode FE37 painted anthracite
Cilinder Height: 600 mm.
Cilinder Diameter 220 mm.
Cilinder Thickness: 4
Moving criteria: Pneumatic
Moving Speed: 5 cm./s.
Connection line to SP station: 10 mt.
Housing frame: yes
Counter-frame to be walled in: yes
Moving cylinder head: checkered plate
Category Retractable Bollard - Retractable Bollard
|
|
PILOMAT@ PASS 275/K-700A IRON PAINTED
Cilinder: steel mode FE37 painted
Cilinder Height: 700 mm.
Cilinder Diameter 275 mm.
Cilinder Thickness: 10
Moving Speed: 8 cm./s.
Manual neutral pulling: yes
Safety pressure switch: yes
Connection line to SP station: 10 mt.
Hydraulic pump: yes
Housing frame: yes
Counter-frame to be walled in: yes
Category Retractable Bollard - Retractable Bollards
|
|
DISSAUSORE PILOAMT 275/K-12 L1 AUTOMATIC RIFLE
H. 900mm
From the 2006 we have dedicated themselves to the development of dissuasive of high emergency anti-terrorism called series K 12; to coronamento of this cycle in date 18.05.2007 we have executed near Institute TTI in Texas crash a test and obtained the certification K12 relative L1 to disciplining of the Department of State American: SD - STD - 02,01, Review To - March 2003.
Criterion of movimentazione: oleodinamico
Resistance to the collision with operation continuity: 19,000 J
Resistance to the break through: 1.800.000 J - a motor vehicle of 6.800 impatta Kg that to 80 Km/h. (developing an energy of equal collision to 1.685.000 J), also permanently deforming the PILOMAT (with consequent block to the operation) it arrests the vehicle.
|
|
PILOMAT@ PASS 275/P-600A IRON PAINTED
Cilinder: steel mode FE37 painted anthracite
Cilinder Height: 600 mm.
Cilinder Diameter 275 mm.
Cilinder Thickness: 6
Moving Speed: 10 cm./s.
Manual neutral pulling: yes
Safety pressure switch: yes
Connection line to SP station: 10 mt.
Hydraulic pump: yes
Housing frame: yes
Counter-frame to be walled in: yes
Category Retractable Bollard - Retractable Bollards
|
|
|
Luxor, the newest addition to the Urbaco family is a technologically advanced product that will hold up to any challenge. It is a retractable, pneumatic bollard, developed to meet any and all requirements. Luxor is the ideal answer to the requirements of heavy duty private use and public applications: business centres, supermarket chains, car dealerships, and historical centres where aesthetics are as important as public safety.
|
|
RB 60/80
Market Segments
* Perimeter access control
*Car park management
* Urban traffic management
The RB60/80 have been developed to secure access to sensible area, to manage pedestrian area and urban traffic. They offer :
*high impact resistance (still working after a 6000 joules impact = 1,250 T vehicle driving at 45 km/h)
*aesthetic obstacle matched to all environment
*3 models : automatic, manual or fixed (different height)
|
|
STOPPY SERIES
Electromechanical automaiton forrising bollards
• A MODEL FOR EVERY NEED.
> Version with lights and alarm.
• SMART TECHNOLOGY.
> Can be configured as follows for power failure: automatic descent or extracted position (with optional Stoppy BAT accessory); When there is no
battery power, Stoppy returns flush to the ground automatically with slight pressure and without causing obstacles.
• SAFE USE.
>Its reflective surface ensures visibility even at night.
|
|
|
|
|
|
The PLAKOSOL, plates retractable stopping controlled, is the result of a study intended to answer the security of the vehicle fleets.
This device meets perfectly the requirements for the public or private users who wish to make safe a site while controlling or by prohibiting in a selective way the passage of the motor vehicles. The reliability of the PLAKOSOL is the main reason of its adoption by the French Official Authorities.
The PLAKOSOL consists of a steel plate inclined with 45 degrees intended to stop Net a launched vehicle. Once retracted in the ground, it is completely invisible. Its robustness allows the passage of trucks and semitrailers charged. It is declined in various lengths, thus adapting to any site.
It is associated with the raising barriers so as to carry out a perfectly sure stopping for the users.
Its communicating interface makes it possible to you to reach remote maintenance and the telecontrol in order to increase the safety of your installation.
The PLAKOSOL makes it possible to constitute hoppers of safety associated with a management by badge readers, controllers biometric, readers of number plates...
The PLAKOSOL can be easily controlled to our systems. It can be associated with other products with our range to increase the effectiveness of the protection measures according to the threat.
|
|
|
Recommended for the security of sensitive sites, the retractable obstacles prohibit, in a dissuasive or strict way, the entry of vehicles at a perimeter, whether it is a parking facility or a very sensitive site.
|
|
|
|
|
|
RB-10 Mechanical Road Blocker
Light model rising blocker to be installed directly onto the road surface, without pit or special infrastructure. Specially designed to control access of existing high security parking areas.
DESCRIPTION
Folded and welded steel housing, 2mm thick.
Upper hood with security lock
Lateral door for access to internal mechanism with security lock
Electromechanical assembly comprising:
120V motor
Life-lubricated speed reduction gearbox with worm screw
Gearbox driven by pulleys and V-belt
Balance achieved by built-in traction springs
Obstacle driven by sprocket-wheels and roller chain
Limit switches activated by adjustable cams
Adjustable safety friction clutch regulated by Ferodo disks
Obstacle made of heavy-gauge goffered steel sheet welded on a strong steel profile frame
Step skirt made up of 1.5mm-thick telescopic steel sheets, white enameled with red reflecting stripes
Driving shaft on pillow blocks with crankshaft/rod device ensuring smooth operation and mechanical locking of step when in upper position
Control logic type D1 for control by3-push button box(open - close -stop),
Frame to be fixed on the road surface by means of rawl bolts.
Difference of level must be compensated by two concrete slopes (to be provided by customer).
Red/green traffic light mounted on cabinet.
Emergency crank for manual operation in case of power failure.
|
|
Geryon security revolving doors protect secure areas of a building against unauthorised access and offer a variety of options for different levels of security. They are equipped with sensors to monitor and analyse the interior of the unit. They can be activated by card readers, buttons, operating panels or by biometric identification systems. The well-rounded selection of optional extras includes reinforced units to protect against burglary and bullet impact and versions with special sliding wings which provide EI-30 fire containment.
Our Geryon product range also includes STS security turnstiles, suitable for use in medium-level security environments. Reduced mobility access can be provided by placing swing or sliding doors at the side.
|
|
|
|
|
|
PILOMAT® PARK
BARRIER SALVAPARCHEGGIO AUTOALIMENTATA
PILOMAT® PARK is a sturdy barrier saves autoalimentata parking (not feeding 220V:) for the safeguard of the single place car.
The installation of Pilomat® Park is much easy and fast one as it is solo to fix to the ground with six dowels to expansion and is quickly working.
Pilomat® Park incorporates 5 alkaline batteries formed D (easy sostituibili) that of it they allow the operation for beyond two years.
In order to carry out the Pilomat® raising Park it uses the released energy from the passage of the vehicle.
Pilomat® Park is equipped with: N 6 dowels to expansion N 1 dima of manual positioning n1 of installation N 2 emitters radius of commando to three push-buttons (in order to command till max 3 N Pilomat® Park with an only emitter).
Pilomat® Park, with the exception of other competitive products, beyond to being autoalimentato has the characteristic important of having the molleggiata barrier of block in order to prevent the breach in case of accidental impact.
|
|
Kerberos/Charon HSB: Sensor barriers
The complete HSB range was designed for access control of staff and visitors in the reception area of companies and public organisations. The barrier is a sensor-monitored channel with automatic waist-high swing doors. After access authorisation has been confirmed, the swing doors quickly open in the desired direction making it easy to move through, even with bags or luggage. The doors close automatically as soon as the authorised person has passed through to prevent any unauthorised access.
An additional version with a wider opening provides access for people with reduced mobility.
|
|
The TF 6000 Short is a pedestrian access control system combining powerful technology and innovative design, to complement your architectural style.
The TF 6000 Short screens traffic flow while ensuring fluid throughput of authorized people. It provides secure access control to sites, and will physically block access in the event of fraud, via its computer-controlled power doors.
|
|
The unit is composed of 2 pedestals that form a lane, with two central doors.
Each lane is controlled by a PLC unité that pilots two DC reversible motors.
Depending on traffic flow needs, each lane can be readily programmed to operate either as an Entrance and/or an Exit.
|
|
The TF6000 Long is a pedestrian access control system combining powerful technology and innovative design, to complement your architectural style.
The TF6000 Long screens traffic flow while ensuring fluid throughout of authorized people. It provides secure access control to sites, and will physically block access in the event of fraud, via its computer-controlled power doors.
|
|
All the “industrial” products developed by Gantois over a period of more than 100 years are well adapted to applications in architecture and decoration.
The diversity of our offer has created for us a unique profile, because we are capable of extending our skills beyond a simple family of products.
Our knowledge and experience, associated with a policy of constant alertness and innovation, are the principal tools of our success and your satisfaction.
|
|
|
|
Access control : Gates, Rising barriers, Retractable bollards...
