|
|
The POUTROSOL is declined in two big families according to its operating processes:
- Obliteration in the ground
- Obliteration upwards, allowing to form a gauge of passage
The POUTROSOL is intended to prohibit completely and in a visible way the passage of any vehicle, or a category of vehicles (limitation height).
Its massive design makes it highly dissuasive all while giving him the capacity to stop any type of vehicle.
The POUTROSOL comprises a simple and robust control. Its automatism makes it possible to easily control it to your systems.
The POUTROSOL makes it possible to constitute hoppers of safety associated with a management by badge readers, controllers biometric, readers of number plates...
Its communicating interface makes it possible to you to reach remote maintenance and the telecontrol to increase the safety of the exploitation. It can also function in a manual way.
|
|
|
|
|
|
A simple solution and tested to control flows of vehicles
APPLICATIONS:
Equipment of the service station
Regulation of the road traffic
Reinforcement of indication
Urban development
Security of the access
The ANTIRECUL conceived by KOPP is the answer best adapted to control the direction of traffic. It consists of mobile spurs assembled in a robust box. While falling down only in one direction at the time of a passage of vehicle, they prohibit any passage to misinterpretation. Its robustness allows the passage of the trucks and semitrailers charged.
The ANTIRECUL constitutes an appropriate response even in urban area, where it reinforces a simple indication. It is about a road safety member adapted to the regulation of flows of vehicles.
The ANTIRECUL is also a member safety when it is associated with a human presence for the equipment of service station or any other type of trade, while making imperative the passage to the cases.
Its mechanical principle ensures a reliability without fault to him. It is possible to order it manually.
|
|
|
A Came patent which is widely applied in demarcating private and public parking for single or multiple spaces. High in technology content, it is uniquely designed and perfectly integrable even in particular architectural settings and historical town centers.
|
|
|
|
|
|
A protection being integrated in the environment
APPLICATIONS:
Forest accesses
Pedestrian precincts
Parks and gardens
Historic sites
Villas of character
The CHAINOSOL, chains heavy retractable, is intended for the prohibition or the control of the motor vehicle traffic, in mediums where esthetics must be taken into account. Indeed, its two boxes are designed to receive a preparing making it possible to integrate them in any site (example: preparing of the type hones).
This product is an answer adapted to the users who wish to control the passage of cars in a nonhostile environment.
The CHAINOSOL requires only travaus of civil engineering light. The chain, firmly anchored on both sides passage in its boxes, is in low position contained in a gutter, releasing thus completely the passage.
The CHAINOSOL comprises a simple and robust mechanics, and its automatism makes it possible to easily control it to your systems.
The CHAINOSOL makes it possible to constitute hoppers of safety associated with a management by badge readers, controllers biometric, readers of number plates...
|
|
BARRIER TO MOBILE CHAIN PILOMAT® CHAIN
PILOMAT® CHAIN is a sturdy barrier to mobile chain in order to delimit steps carrai and wide areas of parking till 20 m.
They Electronic incorporated with motor double quantity to 24V centers that she allows of
to raise chains till 60 kg of weight.
She is equipped of impact sensor
in order to guarantee the maximum emergency of operation.
She advises herself to add the guide to earth for
control of the chain when lowland.
Possibility to connect a card of recharges and batteries tempone
|
|
A new concept of automatic barrier
Designed for a range of large openings up to 7,6 m / 24.9 ft, the new Gard barriers are the ideal solution for control of roads and parking areas for industrial and public use. The Gard series is available in the 110V/230V A.C. motor and the 24V D.C. motor versions.
|
|
|
|
|
|
QIK: THE NEW DITEC BARRIER
Qik barrier has been launched, boasting newly designed shapes and uncompromising security.
Soft profiles, rounded edges, high performance and total installation flexibility.
Newly designed and technically advanced, Qik is the ideal solution to ensure total security access in medium to high transit environments such as: hotels, banks, shopping centres as well as blocks of flats, companies and camp sites, which always require access control to car parking areas, thus ensuring their use only by authorised people.
Safe and reliable
Smart, yet practical and safe, Qik has been designed to last.
The painted pickled metallic sheet metal will not deteriorate with time, even in extreme weather conditions, and gives Qik a clean look.
Clean lines and attention to details in a heavy duty solution
The single block pressure die-cast aluminium reduction unit ensures an easier installation, a longer life and a cleaner look.
The gear motor bronze reduction gears are subject to less wear and tear, thus ensuring a higher number of operations, up to 1.000.000, to be achieved.
Qik: DITEC solution to access control problems
|
|
Barriers series "EURO" and Special
The raising barriers of our series EURO are intended for the access control on sites where the robustness is the paramount element.
Only or associated, the barriers EURO can automate overpasses than 10 meters.
Their peripheral equipments allow them the integration of
Badge readers, remote controls, digicodes, readers biometric...
Cameras
Interphonie
Control with complementary stoppings (retractable gates, terminals, motorized harrows, plates of stopping,...)
The barrier EURO comprises a control simple and robust, its automatism also enables him to be easily controlled to your systems.
Its communicating interface makes it possible to you to reach remote maintenance and the telecontrol in order to still increase the safety of the exploitation.
The barrier makes it possible to constitute hoppers of safety associated with a management by badge readers, controllers biometric, readers of number plates...
|
|
AUTOMATIC BARRIER:
PILOMAT BARRIER
Automatic barrier with survey system obstacle to encoder magnetic with reversal of the movement. In the respect of relative norm EN 60335-2-103 to the automatic barriers, PILOMAT BARRIER inverts its movement also during last the 5 centimeters of race.
Incorporated PARK centers them electronic 24V.
Second time opening 3.
Body in aluminum and steel. Slowing down in opening and closing.
The confection comprises the slab to bury, the telescopic auction from 4 meters and the adhesive ones for the auction.
Simplified installation: without necessity of regulating the motivatings force of balance or the positioning of the finecorsa.
Manual release with personalized key.
Possibility to connect a card of recharges and backup batteries (180 cycles)
|
|
Market Segments
* Perimeter fencing
* Traffic management
* Parking areas
BL 229 versatile rising barrier advantages
Aesthetics
* smooth design
Technologies
* new mechanism
* new user-friendly control board
Performance
* fast, harmonious & silent movements
* intrinsic automatic opening mode (no crank, no accumulator)
Universal
* mechanism & casing : fit for all arm lengths and accessories
* programmable opening speeds for toll or perimeter fencing use
|
|
Rising barrier Boston/Bridge & tunnel
* Great reliability and robustness : 2.5 million cycles guaranteed
* Modular up to 8m
* Anti corrosion casing
* Wild range of options and accessories (traffic lights, signaletic panels, boom skirt)
* Adapted for all control access systems
|
|
Rising barrier Miami/Hospital & Clinic
* Great reliability and robustness : 5 million cycles guaranteed
* High speed performance : up to 15 vehicles / minute
* Modular up to 6m
* Automatic opening in case of lack of voltage
* Adapted for all control access systems
* Man-trap system
* Wild range of options and accessories (boom type PROTECTA, removable boom, ultrasonic sensor, traffic lights)
|
|
Road barriers
• A MODEL FOR EVERY NEED.
> Possibility of closing passages up to 8 m.
• SMART TECHNOLOGY.
> Electronic adjustment of the limit switches.
> The new position of the control panel makes it possible to operate in a vertical position.
• SAFE USE.
> The barrier features a very stout structure to guarantee greater protection from vandal attacks and constant reliability in use.
• SIMPLER INSTALLATION.
> The blinker and the support for the photocells are integrated in the frame (optional), the lights are integrated in the boom (optional).
> Cabling is simplifi ed by means of the ducting for housing the cables themselves.
|
|
|
|
|
|
MAG-12 Small Profile Gate
General purpose automatic rising barrier designed for vehicle access control in public and private parking lots as well as industrial sites. The MAG-12 barrier gate has been developed to provide low cost control in lanes up to 3.65m (12 ').
Description:
Seam welded cabinet is constructed from 10 gauge galvanized steel with polyester powdered finish for superior corrosion resistance.
Lateral door side mounted for easy access to mechanism.
Supports 3 - 3.6m (10-12') pine gate arms up to 4.5Kg( 10Lbs) or 10' Titan Flex arm.
Electromechanical assembly including:
120VAC single-phase motor.
Lubricated speed reduction gearbox with worm screw.
Easily adjustable limit switches with controller overrun protection.
Shaft configuration allows easy barrier model inversion from left to right.
Built-in 250W strip heater.
Easily removable 10 IO PLC logic control to ensure automatic closing of the barrier either by detector and loop or by push button. Opening of the barrier by push button, card reader or wireless remote. Controller provides for connection of two optional loop detectors.
Barrier anchoring by means of expanding bolts or threaded rods, thus allowing easy alignment with road-way.
Dimensions: 100cmHx33cmWx26cmD (40'x13'x10').
Technical Characteristics:
Flange connection left or right, to be specified with order.
Standard power supply 120V AC single phase ( ±8%).
Frequency 50-60HZ.
Reversing Motor 1/3 HP - 1625 RPM.
Operating time 2-4 seconds depending on arm length.
Worm screw type life lubricated gearbox.
Programmable logic controller with LCD display, allows for uploading of logic changes.
Run timer, safety edge input and onboard memory vend.
Operating Temp. - 35° to +70° C.(-31° to 150°F).
Net weight without arm: 61 Kg (135Lbs).
|
|
|
|
|
|
FLEX-18 Barrier Gate (New G89)
High-speed automatic rising barrier especially designed for access control in public and private parking lots as well as industrial sites. The Flex-18 barrier has been developed to ensure an economical vehicle access control for lanes up to 5.5m (18 Feet), while providing dependable efficient control and safe every day use.
Description:
Housing made of folded and welded 10-gauge steel sheet.
Removable upper hood. Upper hood fixed by two latches designed to resist vandalism.
Lateral door side mounted for easy access to mechanism.
Extruded aluminum arm.
Electromechanical assembly including:
120VAC single-phase motor.
Lubricated speed reduction gearbox with worm screw.
Balance achieved by built-in extension spring. No external counterweights.
Crankshaft-rod device ensuring smooth, progressive operation.
Mechanical locking of barrier arm in extreme positions (Closed/Open), with rubber bumpers.
Easily reversible main shaft.
Easily adjustable limit switches with mechanical and controller overrun protection.
Barrier arm shaft mounted on two pillow blocks with welded arm support.
Shaft configuration allows easy barrier model inversion from left to right.
Built-in heater.
Easily removable 10 or 26 IO PLC logic control to ensure automatic closing of the barrier either by detector and loop or by push button. Opening of the barrier by push button, card reader or other optional controls. The 26 IO controller provides for connection of up to three optional loop detectors.
Barrier anchoring by means of expanding bolts or threaded rods, thus allowing easy alignment with road-way (anchoring means available as option, to be defined depending on the type of ground). Fits over existing G89E bolt patterns.
Seam welded cabinet is constructed from 10 gauge galvanized steel with polyester powdered finish for superior corrosion resistance.
Dimensions: Approximately 42" Height x 15" Wide x 15" Deep
Technical Characteristics:
Shaft output left or right, to be specified with order.
Standard power supply 120V AC single phase ( ±8%).
Frequency 50-60HZ.
Reversing Motor 1/3 HP - 1625 RPM.
Operating time 2 -4 seconds depending on arm length.
Worm screw type life lubricated gearbox.
Compression springs available in 1 to 3 spring configurations depending on arm length.
Programmable logic controller with LCD display, allows for uploading of logic changes.
Run timer, safety edge timer, auto close timer (jumper enabled).
Operating Temp. - 35° to +70° C.(-31° to 150°F)
Net weight from 90 to 96 Kg (200-215Lbs), (arm included) depending on arm length.
|
|
The raising barriers of our series EURO are intended for the access control on sites where the robustness is the paramount element.
Only or associated, the barriers EURO can automate overpasses than 10 meters.
Their peripheral equipments allow them the integration of:
- Badge readers, remote controls, digicodes, readers biometric...
- Cameras
- Interphonie
- Control with complementary stoppings (retractable gates, terminals, motorized harrows, plates of stopping,...)
|
|
Rising barrier Tollgate / Motorway
* The reference for the motorway environments : 20 000 cycles / day
* Great reliability and robustness : 10 million cycles guaranteed
* High speed performance : up to 50 vehicles / minute
* Modular up to 3.5m
* Removable boom
* Wild range of options and accessories (boom type PROTECTA, ultrasonic sensor, traffic lights, colors according to RAL)
|
|
Rising barrier Peapark/High capacity car park
* The reference for the paid carparks environment : 20 000 cycles / day
* Great reliability and robustness : 10 million cycles guaranteed
* High speed performance : up to 50 vehicles / minute
* Modular up to 3.5m
* Delivered with articulated and removable boom
* Wild range of options and accessories (ultrasonic sensor, traffic lights, colors according to RAL )
|
|
|
|
|
|
RLG-46 Long Arm Industrial Barrier
The rising barrier type RLG46 with electric control, has been specially designed to control access of vehicles to large areas. Its precise balance, achieved by means of an integrated compression spring, permits a span of up to a maximum of 14m46ft.
DESCRIPTION
Housing made of heavy gauge steel sheet of 3 mm thickness, welded and shaped, with a framework of steel profiles welded into a strong section.
Removable upper hood, locked from inside.
Lateral doors with safety locks, ensuring easy access to the internal mechanism.
Boom made of extruded aluminum tubing, white enameled with red reflecting stripes. The boom is composed of three sleeves of decreasing diameter with an end sealing cap.
Bracing wires and adjustable stretchers in stainless steel. The number of wires varies from 2 to 4,according to the length of the boom.
Electro-mechanical assembly comprising:
120V motor,
life-lubricated speed reduction gearbox, ratio of reduction: 100/1,
gearbox driven by pulley and V-belt, allowing to adapt the operating speed in accordance with the length of the boom,
crankshaft/rod device ensuring progressive, shock less movements as well as mechanical locking of the boom in extreme positions,
safe passage is assured by an adjustable safety friction torque, regulated by Ferodo disks and self adjusting device for wear taking up,
llimit switches activated by adjustable cams.
Balance of the boom achieved by means of compression spring, eliminating all risk of accident to people, thanks to the limited number of movable parts to which the general public have access.
Electrical control board type PLC on a printed circuit remote controlled by a 3-push button box (open - stop - closed) supplied with the barrier.
Built-in heater for low temperature locations.
Emergency crank for manual operation in the event of power failure, with safety circuit breaker cutting the electrical power supply, providing the crank has not been removed from the barrier.
Adjustable tip-support.
Embedded framework composed of a fixing template with threaded rods and fixing claws.
|
|
Safety Bollards help protect warehouse equipment from scratches and dents, and employees from accidents, by creating a vertical physical barrier from fork trucks. Strong protection is provided by a square steel tube, measuring 5" x 5" x 3/16", welded to a 10" x 10" x 3/8" base plate, topped with a galvanized steel cap. Safety bollards are available in heights of 24", 36", and 42".
Safety Bollard Benefits:
- Protect loading dock doors, in-plant office corners, and warehouse equipment
- Square 5" x 5" x 3/16" thick structural tubing
- Topped with a galvanized steel cap
- Solid 10" x 10" x 3/8" thick base plate
- Available in standard heights of 24", 36", and 42"
- Custom 60" high bollards also available
|
|
|
Particularly recommended for the industrial sites and significant, the swivel (or High Drum of Safety) makes it possible to control and manage flows pedestrians. It offers a comfort for the user: after authorization, a simple initial pressure on an arm of the rotor is enough to actuate the automatic rotation of the swivel, in the authorized direction.
|
|
Robust turnstiles from the Kentaur range are ideal for securing outside areas. Used in conjunction with card readers they can be used to control access reliably without the need for personnel, ensuring controlled passage of individuals from one side to the other in the permitted direction.
Versions available with two, three or four wings in a variety of design options.
|
|
Our Full Height Turnstile product range is ideal to secure fence lines for monitoring and controlling users.
Gunnebo manufactures a wide range of indoor and outdoor Full Height Turnstile for applications in industrial entrances, sports arenas, military installations or other premises where you want to achieve a high degree of security without manned monitoring.
Main characteristics
Internal or external use
Electro-mechanical mechanism
90 or 120 degree configuration
Electronically controllable via card reader, pushbutton etc ...
Robust and reliable construction
Alternative colours and finishes
Fail safe emergency interface to facilitate escape
Alternative control devices can be integrated
|
|
|
|
|
|
Automations for sliding gates
Attractive to look at and with cutting-edge technological features
The new automations Cross 7, Cross 8 and Cross 30, amplify the broad range of already-available DITEC products.
Cross 7 and Cross 8
Designed to operate sliding gates weighing up to 600 kg (Cross 7) and 800 kg (Cross 8), these automations are ideal for heavy-duty use and, consequently, are especially suited for the entrances of condominiums, industrial and commercial buildings, wherever heavy-duty use is called for. They incorporate major technical and construction features such as:
- Incorporated electronic panel integrated with on-board easy-access radio
- 24 V version (Cross 7EH)
- Courtesy light with fade effect
- Easy key release by opening centre door
- Sturdy and powerful motor (600 - 800 N, according to model)
- ABS modern-design casing
Cross 30
Sturdy and powerful, with a capacity of up to 3,000 kg
Cross 30, designed for very heavy-duty operation - ideal for industrial and public entrances.
Sturdy and powerful, with a thrust of 3000 N and a 400 V three-phase motor, it is very easy to install.
The entire electromechanical system is in fact fitted inside a sturdy steel enclosure, featuring a practical and large front door for easy component access. Other interesting features are the incorporated control panel, the magnetic mechanical stop and the easy key release.
|
|
PNG 380
Market Segments
* High security
* Intrabuilding access control
The PNG 380 automatic gate accommodates:
* dissuasive access control in one or both directions
* high flow rates of people
* integration with all types of architectural decor
* standard height of glass leaves: 1000 mm
* passage width: 500-600mm
|
|
|
|
|
|
FOG-16 Rising Fence Barrier
The electro-mechanical rising barrier with upper and lower rigid skirt, type FOG18, simultaneously controls the access of both vehicles and pedestrians to a controlled zone. The rigid skirt effectively prohibits access to all pedestrians who have not been duly authorized. As an option, an electro-magnetic arm tip support further reinforces the pedestrian control and eliminates any possibility of opening the barrier by hand, due to its magnetic disk which generates traction of around 200 kg holding force. The maximum length of the barrier arm is 16ft. (5m).
DESCRIPTION
Cabinet fabricated of 3mm thick welded and folded sheet steel with skeletal structure of thick-section welded steel profiles.
Removable upper cover, locked from the inside.
Side doors with security locks affording easy access to the internal mechanism.
Arm of extruded aluminum tubes, white enameled with red reflecting strips. The arm is composed of 3 tubes with decreasing diameters that fit into one another and a tip end plug.
Rigid skirt formed by a frame constructed of square steel profiles of 30 x 30 mm, in-filled with hot-galvanized steel wire lattice work. In the standard version, the unit is painted white, except for the wire lattice.
Stainless steel rods absorbing the tension of the wire lattice on its frame
Electro-mechanical unit, including :
120V motor,
permanently lubricated endless screw speed reducer,
driven by grooved pulleys and V- belt, making it possible to adapt the speed as a function of the length of the arm,
transmission of the movements by crankshaft/rod system allowing smooth progressive accelerations and decelerations, as well as mechanical locking of the arm in the end positions,
passage security assured by a safety torque limiter with friction adjustable by Ferodo disks, with integrated automatic wear compensation system,
limit switches activated by adjustable cams.
Balance of the arm/skirt unit ensured by integrated compression spring, eliminating any risk of personal injury, due to the limited number of moving parts directly accessible to the public.
Electric control logic type PLC on printed circuit for control by 3-button box with change-over contactors, heat protection, general connection block and test toggle switches. Including a 3-button box (open - stop - close).
Integrated ambient heater.
Emergency handle for manual operation in case of power failure, with safety switch cutting off the electrical power supply when the handle is in place in the barrier.
Standard arm tip support provided as basic equipment. The model in the illustration is the electro-magnetic arm tip support, available as an option.
Frame to be sealed, composed of a basement template with threaded rods and fixing brackets.
|
|
The bulletproof guard station ensures the safety of guards at access control points to sensitive sites.
The bulletproof station is composed of:
. 1 tubular exterior frame made of aluminium profiles
. 1 upper section made of bulletproof glass
. 1 opaque lower section made of sandwich panel
. 1 double door opening outward with 750 mm passage width and a double lock system
As an option:
. mobile weapon ports
. built-in fold-down seat and table
. interior electrical equipment
. heating
. air conditioning
Different ballistic classifications possible. Please contact us.
|
|
Charon half-height turnstiles and swing doors are ideal for stylish interiors thanks to their wide range of design options. These stylish turnstiles and swing doors provide an effective way of managing the flow of guests and staff in impressive entrance halls, VIP areas or at the entrance to top management suites.
All options can be combined with time recording systems and ID recognition systems including contactless and biometric systems.
|
|
Conceived to ensure the safety of strategic access against ram-vehicles, the Urbaco range of High Security Bollards are the answer to the most demanding requirements of access control and impact resistance.
With applications in airports, government or military facilities and other buildings that may require heightened security, Urbaco bollards are so solid that three together can withstand the impact generated by a 7-ton truck travelling at a speed of 50km/h (31mph).
Even when fully extended, more than 1/4 the length of bollard head remains lined by the patented monobloc® double-lid, increasing the impact resistance
|
|
MANUAL SALVAPARCHEGGIO PILOMAT PARKY AR 600
Device for the protection of the parking, motor vehicle on private area sluice to the public transit.
Construction in elettro-galvanized steel tubes.
Cap of protection on the foot of implantation in steel elettro-galvanized realized in POLYAMIDE (NYLON) loaded with glass fiber "FIBER GLASS", resistant material many - new and searched design - rounded off forms.
Block automatic rifle to the manual return in vertical position.
Possibility of closing also in lowered position.
Certifyd product TÜV.
Anticorrosion treatment elettro-galvanizing
System of closing Cylinder European profile
Dowels to expansion (if the installation place uses allows some it)
|
|
|
|
Access control : Gates, Rising barriers, Retractable bollards...
