- Hydraulics - Pneumatics >
- Pump >
- Pump accessories
Pump accessories
Flow: 2.4 m³/h - 25.5 m³/h
Pressure: 6, 10 bar
Pressure boosters with two single-phase or three-phase pumps, horizontal or vertical type, prearranged for connection to membrane, air cushion and air feeder autoclaves, with factory programmed parameters, particularly versatile thanks ...
EBARA PUMPS EUROPE
Flow rate: 20 l/min
Programmable 2-point vacuum control Inlet separator and outlet condensor for excellent solvent recovery Reliable and maintenance-free Chemically-resistant PTFE/FFPM flowpath Complete vacuum system with chemically-resistant diaphragm ...
KNF NEUBERGER
• Fast and convenient tube changes • Low pulsation due to 5 roller system • Pump head features ball bearings • Rollers made of stainless steel • For tubes with a 1.6-mm wall thickness (wt) • Depending on drive and tubing, flow rate ...
• Accepts 12 cassettes small • Built-in reduction gear allows feeding of smallest quantities • 8 rollers minimizing pulsation Multi-Channel Operation • Increase your throughput by running up to 12 cassettes small on one single pump ...
Flow: 2.9, 6 l/min
Pressure: 6,200 bar
KMT Waterjet Systems has the broadest range of abrasive waterjet intensifier pumps with the introduction of the Ultra High Pressure (UHP) KMT STREAMLINE PRO®-III Series 6.200 bar Waterjet Pump. The PRO-III 6.200 bar | 45 kw Pump will ...
Flow rate: 590 ft³/min - 760 ft³/min
Suction pressure: 15 psi
The leading extraction solution. Always the right capacity. The FlexPAK high vacuum unit represents the foremost solution on the market. The unit is designed for the extraction of welding fumes, grinding dust, metal chips etc. FlexPAK ...
NEDERMAN
Flow rate: 0 m³/h - 4,200 m³/h
Suction pressure: 0 bar - 0.033 bar
The KRVS are liquid ring vacuum packages developed for generating vacuum in the most varied sectors, such as the chemical, petrochemical, pharmaceutical or textile industries. Vacuum up to 33 mbar(a) Pressure up to 2,000 mbar(g) ...
The new Steptronic range is designed to operate as either a panel mounted or "stand alone" OEM cased unit. The Steptronic features an accurate, high resolution, integrated stepper drive which is suitable for continuous duty and critical ...
Ejectors are suitable for grippers where the need for high vacuum flow is not excessive. Ejectors are easy to integrate as only compressed air needs to be connected to the gripper. UniGripper ejectors come in three housings allowing ...
Flow rate: 12 m³/h
Suction pressure: 0.5, 150 mbar
The vacuum pump is assembled directly to the steel tank to reduce clearance requirements. The system can be supplied with an oil pump or dry pump depending on the required application. The pump is equipped with a safety suction filter, ...
Bgs General Srl
Flow rate: 6 m³/h - 340 m³/h
Suction pressure: 0.5 mbar
The vacuum pump is assembled directly to the steel tank to reduce clearance requirements. The vacuum pump is equipped with a safety suction filter, non-return valve and shut-off valve. The electrical power panel and controls guarantee ...
Bgs General Srl
Flow rate: 12 m³/h - 42 m³/h
Suction pressure: 10 mbar
Vacuum system consisting of 3 rotary vane vacuum pumps with oil injection lubrication, a vertical frame reducing clearance requirements, a vertical tank assembled onto a common base, primary electrical panel, emergency electrical panel ...
Bgs General Srl
Flow: 50 l/min
Pressure: 0.5 bar
Automatic high pressure groups coupled with selfpriming jet pumps. They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups. LIMITS ...
Speroni
Flow: 50, 60 l/min
Pressure: 0.5 bar
Automatic high pressure groups coupled with selfpriming jet pumps. They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups. LIMITS ...
Speroni
Flow: 50, 70 l/min
Pressure: 1.6 bar
Automatic high pressure groups coupled with selfpriming jet pumps. They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups. LIMITS ...
Speroni
According rules: VDE,CEERugged & compact constructionLonger lifeWith ON/OFF switch Use : MillingDrillingGrindingPlanningMachining Voltage : 230 ou 400 VAC
Rugged constructionEffectiveLonger lifeSureWith ON/OFF switch . oil-lubricated rotary vane pumps . Starting box (to CE standards) . Vacuum switch-manually adjustable vacuum threshold value . Vacuum gauge . Air filter and strainer . Air ...
Flow rate: 8 l/min - 10 l/min
small rocking piston type oil-free, 115V or 220V MP-10V-S
Yuh Bang Industrial Co., Ltd
Flow rate: 12 l/min - 15 l/min
Yuh Bang Industrial Co., Ltd
Flow rate: 14 l/min - 18 l/min
Yuh Bang Industrial Co., Ltd
TATSUNO OCEAN TOWER BMP 4024 OWD The fuel dispensers Tatsuno-Benc of series Ocean BMP 4000.OE EURO serve for dispensing of liquid oil products into road vehicles on retail and commercial outlets. We are speaking about progressive single ...
Eurial
TATSUNO Ocean SMART WSE for windshield fluid - WSE - water & soap & ethanol solution STANDARD SPECIFICATIONS The support is made of electrostatically painted steel. Stainless steel hose column (AISI 316) Removable panels ...
Eurial
Capacity: 3,000, 5,000 l
Aboveground container for AdBlue storage and distribution 1. Tank configuration • Painted steel structure, color: blue RAL 5010 or other RAL colors on request; • Thermally insulated cover for UV, rain and snow protection; • Electronic ...
Eurial
The DAB offers a series of water-lifting sets that is equipped with 1/2/3 NKP - G/K series of centrifugal pumps. These equipment are constructed with a galvanized-steel base, suction and delivery manifold (for models with 1-pump delivery ...
Suction pressure: 10 bar
GUCUM oil circulated vacuum units are used many industrial aplications through it's specifications. It works with high performance up to 10 mbar absolute pressure use to working with only oil circulated. There is no water consumption ...
GUCUM water circulated vacuum units are used many industrial aplications through it's specifications. It provides ideal solition at processes contain much water vapour. The vapour that enters the pump is condensen and discharges as ...
Multi-user diesel dispensing station + electronic meter Descriptive Technical data: Encased diesel dispensing station Hose: 4 metres Automatic dispensing gun Current: 3.3 Orifice Ø: 1" Specifications ...
Diesel dispensing station with K33 meter and automatic dispensing gun Descriptive Technical data: Encased diesel dispensing station Hose: 4 metres Automatic dispensing gun Power: 0.37 (COJEV2533A), 0.75 (COJEV5833A) ...
CEMO
Capacity: 210 l
CEMO
Capacity: 600 l
CEMO
MultiPlier 2000 is a hydraulic pressure intensifier for high-pressure power packs up to 3,000 bar/43,500 psi. Features: In-line pressure intensifier End pressure range: 800 - 3,000 bar / 11,600 - 43,500 psi Multiple intensification ...
ScanWill
Flow: 1.5 m³/h - 570 m³/h
Fixed speed pump pressure boosting sets for domestic use with 2 MXH, MXP, NM, NG, NGX
PRODUCT FEATURES Rated power range of 3.1 – 3.7 kW Thrust range of 430 - 460 N Solids removal Mixing and flushing Non-clogging test content Dual, superior performance Flygt hydro ejectors perform two different operations depending ...
Jabsco
Flow rate: 5, 10, 40 m³/h
This type of vacuum pump is not adversely affected by air-admittance during the moulding process (‘rough’ vacuum) unlike oil-lubricated pumps which, despite achieving higher levels of vacuum, can vent oil vapour if used in this type of ...
Composite Integration Ltd
Flow rate: 16, 4, 25, 40 m³/h
A range of oil-filled vacuum pumps ideally suited to ‘infusion’ type processes where high level vacuum is required. Reliable and robust oil-filled rotary-vane, air cooled pumps Vacuum levels down to 0.2 mbar absolute Oil mist separator ...
Composite Integration Ltd
Flow rate: 80 m³/h
Rotary-claw type pumps are ideally suited to large scale VRTM processes, combining exceptional toughness, high flow rates and low output noise.This type of vacuum pump is not adversely affected by air-admittance during the moulding process ...
Composite Integration Ltd
Flow rate: 0.2 l/min - 12.3 l/min
Suction pressure: 1.1 bar - 4 bar
The Magic Grippers are a general purpose, all-in-one vacuum system that covers most applications. The Magic Gripper has eliminated the need to purchase separate fittings, connection hoses, filters, and suction cups as they come as a one-piece ...
Flow rate: 2.3 l/min - 42.2 l/min
Suction pressure: 4, 2.2, 3.3 bar
The Magic Grippers MC20A series are a general purpose, all-in-one vacuum system that covers most applications. The Magic Gripper MC20A has eliminated the need to purchase separate fittings, connection hoses, filters, and suction cups ...
Flow rate: 3 l/min - 85 l/min
Suction pressure: 2.2, 4, 3.3 bar
The Magic Grippers are a general purpose, all-in-one vacuum system that covers most applications. The Magic Gripper has eliminated the need to purchase separate fittings, connection hoses, filters, and suction cups as they come as a one-piece ...
Flow rate: 4,000 m³/h
Suction pressure: 0 mbar - 0.001 mbar
The SIHI Dry Chemical PD two-stage roots system is based on a dry-running screw pump and a roots pump. The spreader rotates in the opposite direction without touching. The intake is on the upper side and the outlet is in the geodetically ...
Flowserve SIHI Pumps
Flow rate: 2,700 m³/h - 6,000 m³/h
Suction pressure: 0.001 mbar - 1,013 mbar
SIHI Boost Screw Booster Chemical PB A Vacuum Pumps have been developed for the requirements of booster pumps in fine vacuum pressure range in hazardous areas. Offering high compression ratio allows significantly lower backing pump capacity. ...
Flowserve SIHI Pumps
Flow rate: 160 m³/h - 1,000 m³/h
Suction pressure: 0.001 mbar - 1,013 mbar
SIHI Dry Industrial GD V vacuum systems have been especially developed for use in industrial applications. It is based upon a dry running twin screw principle working as a single stage vacuum pump. - No wear parts / contact-free shaft ...
Flowserve SIHI Pumps
Capacity: 500 l
•For the mobile filling of machinery and vehicles directly at the place of use •Time-unlimited UN approval as a transport container •Explosion pressure shock resistant and double-walled, hot dip galvanised inside and out •High level ...
VACUUM GENERATING STATION This system ensures a high degree of cost optimisation by removing the vacuum generation function from individual lines or autoclaves and centralising it in a single apparatus. The rationale guiding the ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining