|
|
| Products 151 to 180 of 216 |
Eclipse® 100LY Lamp-Pumped Laser Marking Systems
For the Ultimate in High Speed, High Quality Product Identification, the Eclipse® 100LY Lamp-Pumped Laser is designed for hard surface treatments. It's the powerful, reliable choice for marking titanium and their high strength alloys, medical implants and hard plastics.
|
|
|
Our Nd:Yag Laser etching System is "Q-switched" or cycled at very short pulses in order to optimize peak power for a very effective material interaction. Precise beam quality with our laser etching system provides a tightly focused, accurate laser spot with exceptional power density. The laser is controlled by a DSP Board, which is inserted on the PCI Bus in a normal PC.
|
|
Mobile marking system with needle engraver
Machine type: MÖ-RI-HA-024-M
Manual marking system
Mobile marking station.
mobile carriage with integrated central unit and receiver for needle head and device with hose winder for pneumatic connection and cable winder for electrical connection
Needle engraver
Markator MV5 UV4 – Flexible CNC-needle- and engraving system as mobile marking system
Marking zone
100 x 100 mm
Receiver
for needle head, adaptable for workpieces with positioning pin and swing clamp.
Spring type-balancer
as ergonomic lift aid
Workpieces
Transmission case
Z-axis / lift
300 mm motor driven
|
|
|
|
|
|
LaserStar’s turnkey marking systems offer the benefits of a non-contact, abrasion-resistant, permanent laser mark onto almost any type of material.
A wide range of standard and custom platforms are available incorporating LaserStar’s DPSS, Q-Switch laser source technology. Choose a portable platform or a custom designed workstation which offers the speed, reliability and flexibility required for meeting stringent quality control and process certification standards.
LaserStar marking systems range from a simple enclosure to an advanced, integrated XYZ motion for step and repeat laser marking or coordinated rotary motion for seamlessly marking around a circumference, all controlled through the marking software.
As a turnkey solution provider, LaserStar’s Applications Specialists will evaluate your marking or engraving requirements, define the application goals and objectives, specify and verify the correct marking platform, and define a complete system configuration to accomplish the desired results.
• Solar & Semiconductor
• Bio Sensor Production
• Thin Film Polymers
• General Marking & Engraving Automotive (Parts and Displays)
• ID Cards & Mobile Phones
• Medical Devices & Implants
• Electronics & Sensors/Instruments • Industrial Components
• Manufacture of Processed Parts
|
|
|
|
|
|
3000 Series LaserStar Marking Sources
LaserStar Marking Sources offer the benefits of a Direct Metal Marking, non-contact, abrasion-resistant, permanent laser marking onto almost any type of material. High-speed, high precision, micro-marking LaserStar sources are ideal for a wide range of industries and integration applications.
State-of-the-art technology with the highest laser beam quality and high peak power are the fundamental principles defining LaserStar Marking Sources. High precision markings are achievable on almost any type of material including stainless steel, strength alloys, carbide, copper, titanium, gold, platinum, aluminum, marble, rubber and leather, as well as a wide variety of medical-grade alloys and plastics.
Identification text, serial numbers, corporate logos, 2-D data matrix, bar coding, graphic and digital images, or any individual process data can be produced with laser marking.
• Logos, certification symbols, barcodes, serial codes, and 2-D data
matrix code
• Simple custom text, serial numbers, bitmaps, graphic and CAD-files (HPGL)
• Marking and cutting of foils and light-gauge steel sheets (i.e., labels)
in one cycle
• Rapid marking on precious metals with heat-sensitive materials items such as
mobile phone keyboards, dashboards, and other illumination components for
aerospace and automotive markets
|
|
|
|
|
|
With our OEM marking devices you can label quickly and precisely in your production. The investment/benefit ratio is extremely favourable. We have developed the quality and working life of the device to a high level.
Our marking systems have a wide range of applications. Metal, plastics, ceramics or glass can be marked. The lasers can be used as a single workplace or integrated into an automated production facility.
Our sophisticated software „Mark“ enables quick setup and safe working procedures. We provide standard parameters for a good production result on a very wide variety of materials.
You can choose from 2 marking systems: LEO Mark or AQUILA Mark. Both marking systems have a high quality laser beam source: LEO or AQUILA.
LEO Mark - the precision professional
Precision is to the fore in the LEO Mark. Wherever high-resolution structures are to be generated, this laser is the fi rst choice. When labelling with LEO Mark, you will achieve an excellent edge sharpness. Due to its extremely compact dimensions, LEO Mark can easily be integrated into your production. In addition, this laser is a particularly inexpensive solution.
AQUILA Mark - the high speed specialist
AQUILA Mark is the ideal solution for marking at high speed. It can cope with large numbers of parts in short cycles. With AQUILA Mark, larger marking areas can also be labelled. In addition, this laser can produce deep engravings.
|
|
The SpeedMarker FL is a galvanometer-based marking system which is powered by a fiber laser. This system stands for rapid processing speed and top precision as well as highest durability of the realised markings on a broad range of materials.
The SpeedMarker FL laser source is a state-of-the-art fiber laser which means that the laser is very robust ("all-in-fiber-design"), compact and efficient. Whereas the emission wavelength is comparable to a normal YAG laser (1064nm), lifetime and reliability of a fiberlaser are significantly higher. The SpeedMarker FL can be easily integrated into existing production lines, even if the available amount of space is very limited. However, the SpeedMarker FL can also be operated as a stand-alone solution when combined with the specially designed workstation.
|
|
|
|
|
|
The Q-Switched Fiber Laser Marking Kit is a safe, state of the art, low-cost alternative for laser marking with Nd:YAG and Nd:YV04 lasers(Lamp-pumped, Side-pumped Diode and End-pumped Diode).
It features independent components, including a Q-switched Fiber Laser, Scanning Head, PCI Control Board, Power Supply, and software configured for your specific application.
Main Features:
- Up to 2mJ Energy Per Pulse
- Q-Switched Fiber Laser With Pulse Energy - 80 to 500ns Pulse Duration
- Excellent Beam Quality (M2 < 1.05)
- 10 to 80 or 20 to 100kHz Tunable Repetition Rate (depend on the laser module)
- 1064 -1080 nm Center Wavelength
- Fiber Delivery - Fiber Outputs With Integrated Beam Expander and optical isolator
- Up to 50% Wall-Plug Efficiency
- Maintenance Free Operation - 50,000 to 100,000 Hours MTBF
- Compact Rugged Air-Cooled Package
- Sealed Optical Path From Laser to Scan Head
- Custom OEM Specifications Available
- No alignment required
- Takes 110 Volts standard plug.
- Laser draws only 300 watt (less than computer).
- 2 year warranty on laser
- 5 years warranty plan
|
|
|
|
|
|
CO2 - Laser Marking System OEM
The ultra-compact Laser Marking System OEM is air-cooled and consists of a 20 Watt or 32 Watt laser source with RF-generator. The package contains a beam expander, a 2D scanning head, a plan field objective, power supply units, a marking controller LM201 and the corresponding Windows-based standard software.
With the standard objective it is possible to mark fields of 75 mm x 75 mm. The „on-the-fly“-option makes marking of moving objects possible.
Pointing laser and software-packages are optional available. The system is a plug-in system and designed for integration in machines and installations of laser class 4 and laser class 1. It is also available as an OEM-version without marking controller – alternative deliverable with PC-Interface-card.
- Ultra-compact Laser Marking System OEM for integration in laser class 4 or class 1 environment
- Plug-in
- Air-cooled CO2 – laser
- Laser power 20 Watt and 32 Watt respectively
- Pulse rise times: ca. 70 µs
- 2D scanning head
- beam expander
- Marking software (Windows)
- Scanning field 100 mm x 100 mm
- Scanning fields up to 250 mm x 250 mm - optional
- OEM-version without laser controller - optional
- Pointing laser - optional
- Marking "on the fly"- optional
- additional software - optional
|
|
|
|
|
|
Power and precision.
Diode-pumped laser sources for marking and engraving.
End Pumped Solid State Laser solution for industrial laser marking applications. An industrial optical fiber connects the laser Head to the Power Supply unit.
The laser diode pump is located in a sealed module inside of the air cooled electronic power supply rack.
Characteristics of the ViolinoTM 3 are an excellent beam quality, high peak power, short pulse width. Highly aggressive on metals while at the same time limiting thermal effect for optimum marking of plastics.
Ideal for marking a broad range of materials with the best results on steel, titanium, aluminum (bare, anodized or coated) as well as on plastics (such as ABS, Lexan, PES, PET, PVC), polycarbonate and many others.
The simple end-pumped architecture using a TE cooled diode laser pump with high MTBF, assures the reliability and availability of the system which is required by the standards of many industrial applications including automotive and electronic manufacturing.
Power, long term stability and precision of ViolinoTM 3 laser allow successful use in all laser marking applications: ENGRAVING, ANNEALING, ABLATION and COLOR CHANGE. ViolinoTM beam characteristics permits material interaction effects such as vaporization, surface marking, removal of coatings as well as alteration of the molecular structure of a material area without affecting the material as a whole. Whatever the case may be, the result is always a visible and high contrast marking.
|
|
General description
Application: Engraving alpha-numerics on flat and curved surfaces.
Features: A 25-watt CO2 laser system with bowl feeder contained in a noise reduction enclosure.
|
|
|
|
|
|
Fully-automatic system for ‘UTC’ laser marking of beverage closures. The system is characterised by its compactness and the option of integration into existing production lines. The closures are fed fully automatically and in the correct position depending on the feed system selected. Depending on the layout of the feed system, closures with a diameter of up to 50 mm can be marked on the inside, but also on the outer surface (top).
They are transported by means of a vacuum band where they undergo ‘On The Fly’ marking. This significantly speeds up the whole process, since no processing time is wasted handling the products. The result is an extremely high marking speed of up to 1500 parts per minute. This depends on the material being marked as well as the text or logo.
A piece of software specially developed for the application called ‘TP_mix’ allows the user to deal with all common variants of marking of ‘UTC closures’. These range from simple logos to the marking of codes (unique message). The user can generate all these variants with great ease and, more importantly, with the level of security (passwords, logging etc.) required for this type of production.
|
|
Laser marking machine with Möck-twin rotary table
Machine type: MÖ-BL-HA-027-H
Marking laser
VectorMark compact VMc5
TRUMPF-LASER
Remote diagnostics of the laser system via modem
Wave length
1064 nm
Dimensions
1826x1740x2284 mm (LxWxH)
Workpieces
Plastic parts for the day and night design
Receiver
Receiver on patented Möck- twin rotary table to increase in productivity
Options
Vacuum extraction system LMD 508
filter unit
|
|
|
|
|
|
The new Hand-Held Fiber Laser Marking System is the industry’s first 12/24 volt hand held fiber laser system.
The standard configuration of the handheld marking system allows for many different options to meet any production need. This extremely versatile unit can be moved easily for convenient operation from any location and is capable of marking materials ranging in size from minuscule to considerably large equipment that would not fit into traditional marking systems. Additional features include ease of installation allowing for quick start-up and graphical-based programming for a minimal learning curve. Requirements beyond those listed above will be quoted upon request.
Due to the increasingly worldwide nature and importance of the optics/electro-optics industry, detector/sensors industry, components industry, and materials industry, the United States government and the Department of Homeland Security initiated a variety of programs where lasers became an essential part of present and future defense applications. In the private sector, a variety of government contractors elected to use lasers and advanced optics to comply with strict government regulations. Laser Photonics envisioned the opportunity and successfully introduced and delivered applications compatible with military standards, while continuing to perfect the use of our laser technology for future commercial and defense applications.
|
|
Demo-Case
mobile CO2 Laser Marking System
TAUFENBACH has developed a mobile CO2 Laser Marking System for a flexibel use in different areas of applications.
Typical applications:
- sales support
- research / developement
- laboratory use
- small batch series
- production
|
|
Portable with Mobile Cart
20 Watt Ytterbium Fiber Laser with Hand Held Portable Marking Head
20 Watt Ytterbium Fiber Diode Pump
Marking Laser
Scan Head Assembly
3" X 3" Marking Field
8.1 Focal Length
3 Meter Fiber Optic Cable Assembly
Mobile Cart Base Station for Laser Controls and Computer
Spring Loaded Locking Casters
Battery Back-Up and Surge Protector
Industrial Rack Mount Components
Includes: Scan Head Docking Station with Manual Z
Tooling Plate with Fixture Locating Holes
Extended Z-Axis for Parts 1 to 20 Inch Height
Back-Pack Controls for Scan Head
|
|
|
|
|
|
Pulsed Fiber Laser Coder for Metals, Plastics and hard-to-mark Materials
ALLTEC LF100 & LF200: Small, flexible, reliable
ALLTEC LF100 and LF200 are small and compact, flexible, versatile and highly reliable for many applications in the electronics, automotive, tools and metal as well as aerospace, and medical devices industries. LF100/ LF200 are capable of static and on-the-fly marking on a variety of plastic, metal and other hard to mark materials with 10 watts (LF100) and 20 watts (LF200) of output power respectively. They provide an unrivalled compact mechanical design with one of the smallest marking heads of its kind and straight-out or right-angle beam exits for increased versatility in tight spaces (esp. in OEM machines). Less-frequent maintenance intervals and extreme reliability maximize uptime and reduce costs.
ALLTEC LF100/LF200 use a maintenance free, air-cooled Ytterbium fiber laser source instead of a gas laser tube or a laser rod which are used in CO2 gas and Nd:YAG solid-state laser coders. Both can quickly apply complex variable data such as high-quality identification matrix codes, bar codes, logos and serial numbers.
Additional advantages include further ease of integration due to the systems dovetail joint; the ability to decide for PC independent operation via a special software interface; the possibility to choose from a selection of languages displayed on the user interface (e.g. English, Chinese, Turkish, and many more) along with password-protected security levels provided by the flexible and proven Windows®-based Smart Graph™ software.
|
|
The Fibre200 is the ideal solution for high volume personalization.
Able to mark on both metals and plastics at unparalleled speeds in high resolution. A versatile machine providing permanent, black marking for optimum productivity. No additional consumables or external cooling system required.
Minimal maintenance needed, long diode life span (MTBF of 100 000 hours). Its speed and marking quality offer complete satisfaction.
Laser:
_Pulsed fibre laser: 1,064 nm
_ Average power: 20 w
_Peak power: 12kw
_Safety: CDRH Class 1 (EN60825)
Size and Weight:
_Casing dimensions: 590*827*806 mm
_Casing weight: 75 KG
_CCU dimensions: 483*184*376 mm
_CCU weight: 17 kg
|
|
|
|
|
|
3800 Series Turnkey FiberStar Marking Systems
FiberStar turnkey marking systems offer the benefits of a non-contact, abrasion-resistant, permanent laser mark onto almost any type of material.
A wide range of standard and custom platforms are available incorporating fiber laser source technology. Select a standard platform or custom designed workstation which offers the speed, reliability and flexibility required for meeting stringent quality control and process certification standards.
FiberStar marking systems range from a simple enclosure to an advanced, integrated XYZ motion for step-and-repeat laser marking or coordinated rotary motion for seamlessly marking around a circumference, all controlled through the marking software.
As a turnkey solution provider, LaserStar’s Applications Specialists will evaluate your marking or engraving requirements, define the application goals and objectives, specify and verify the correct marking platform, and define a complete system configuration to accomplish the desired results.
Solar & Semiconductor • Bio Sensor Production • Thin Film Polymers
General Marking & Engraving Automotive (Parts and Displays) • ID Cards & Mobile Phones
Medical Devices & Implants • Electronics & Sensors/Instruments • Industrial Components
Manufacture of Processed Parts
|
|
|
|
|
|
LP-V series
SUNX’s latest generation of laser markers utilises an enhancement of YAG technology called FAYb (Fibre Amplified Ytterbium).
These fibre lasers provide several advantages over traditonal Nd:YAG systems, such as a better marking quality (laser beam diameter, e.g. LP-V10U-C 60µm), smaller housing dimensions, a significantly longer lifetime of more than 60,000 hours and lower fixed costs because FAYb systems consume much less power (390VA) and get by with simple air cooling.
Due to their average output of 12W (compared to 50W of a YAG laser), SUNX’s LP-V series Laser Markers can mark nearly all metals using the laser processes of deep marking or black marking. Using the laser processes of internal foaming, carbonisation (colour change) or bleaching, resins can be marked or even modified with outstanding quality.
The LP-W052U-C is especially well suited to mark products of the electronics industry, e.g. semiconductor devices, due to its extremely small laser beam diameter of just 30µm and because it marks in continuous wave mode.
Both the LP-V and LP-W series come equipped with an encoder interface to mark moving objects, e.g. objects on an assembly line. Other standard features of the LP-V and LP-W series include a code function (Data Matrix, various bar codes, etc.) and standard functions such as counters, expiry date and lot number generation.
|
|
GALAXY ROBOT Laser Marking Center
The best solution for the laser marking , engraving and cutting operations with any laser source (CO2, Yag and Fiber) on materials like wood, plastics , paper, fabric , rubber , marble and stones, metacrilate, leather, metals and more other. This machine series is the first choice for some world-wide leader companies as, for example, Luxottica, ABB, Mercedes Benz, Askoll e Maino International, the warranty for the best price/performance ratio available on the market for this type of laser . This version "ROBOT" is equipped with 6-axis Kawasaki robot, to move the part for the most difficoult processing.
The robust and practical mainframe, the innovative technical solutions and the components accurately selected assure a high level of finish, sturdiness and reliability of the whole system, as well as ease of utilization thanks to the software MatriX based on Linux RTI operating system.
|
|
Fiber Laser Cutting Robot :
The Fiber Laser Robot is ideally suited to integration and automation for cutting & welding applications. Fiber lasers in the multi-kilowatt range offer dynamic material processing capabilities for manufacturers. These custom-built systems offer increased flexibility, reliability, and quality. Optimum return on investment is guaranteed with these fully programmable machines.
- High Power Fiber Laser up to 5000 watt.
- Capacitive sensor for metal surfaces cutting
- A new generation of industrial laser equipment
- Fiber laser allows Multi Axis flexibility.
- Optical isolator for hi reflective metal cutting.
- Integrated aiming beam for programming and process training
- Excellent performance in material handling, machine tending and process applications
- Robotic Arm Brand: ABB, KUKA, Panasonic.
|
|
Integrated laser in our systems
A laser integrated with chain conveyor and robot
B laser integrated with chain conveyor
C laser integrated with automatic turntable
D laser integrated with automatic feeder of cards, suitable for greeting
cards engraving and/or cutting
E laser integrated with automatic feeder of metal tags
and nameplates
F laser integrated with Rotary device
|
|
Standard Features:
- 10-watt CO2 laser
- LaserGraf™ precision control software
- 16 bit high precision galvanometers
- Safety interlocked door
- Fume extraction port
- Computer, monitor, keyboard, mouse
|
|
Being a table top system, the NAUTILUS is suitable for stationary use as well as for mobile use. It operates with a conventional power of 230 V (110 V optional) and does not require any external cooling.
The classification laser class 1 means, the marking system has got the same safety requirements as a hifi system.
With the NAUTILUS you can mark almost any material – flat and shaped parts, standard marking tasks or serial numbers – this marking system simply offers you maximum fl exibility. Marking with NAUTILUS means high resolution and precision – great speed guarantees high effi cieny in your production process.
|
|
The table top laser marking system NAUTILUS opens up the possibility to benefit from an industry proven technology in a cost-effective way, even for smallest volume productions.
The compact table top system has a low weight and can be installed quickly. In spite of its enormous power, the NAUTILUS is easy to handle.
Due to the high resolution and precision of the NAUTILUS system, it is possible to perform quick and permanent markings on almost every kind of material.
Furthermore, the extraordinary housing of this table top system sets standards in terms of product design.
|
|
|
OT-LAS has setting up Mistral, a system that completes and diversifies the existent production range. The flexibility of Mistral is the competitive answer to the most varied line production requirements. Dedicated and with the possibility of personalization the hardware accessories supplement themselves in a powerful and multipurpose software management. Entirely developed and realized inside the group it combines efficiency and flexibility.
|
|
| ... products without technical information |
| |
|
|
Laser marking and engraving
