|
|
| The industrial professional laser safety housing LSG65 enables to mark workpieces inside the marking area of the laser (110 x 110 ) according to laser protection class 1. The laser cell eliminates any risk of laser radiation to the operator’s skin or eyes.The integrated focus finder used to adjust the focal length ensures a fast setup time for marking products of different sizes. Focus finder adjustment is controlled by means of a stepper motor driven Z-axis from two push buttons in the integrated operation panel or by an interface at the PC. Backlash free z-axis adjustment with ball bearing manufacturers suppliers of spindle and guide is ensured. The laser coding area may be internally illuminated for user observation. The laser cell includes integrated vacuum piping for extraction of particles and contaminants created during laser marking. Different accessories required during the marking process may be clamped right-angled to the marking area on the base plate. Furthermore, the working area is optionally air-conditioned. The housing is made out of solid sheet metal. Moreover, a swinging arm provides support of professional keyboard and monitor for the operator’s ease and convenience. |
|
| The professional laser professional turntable 400 enables to mark single workpieces in the area of the laser according to laser protection class 1. The turntable rotates throughout 180 degrees. New parts may be placed at the front side and at the same time parts may be laser-marked in the back. Release of a rotation is made by two-hand operation on release of the laser after having finished a marking process. The laser irradiation does not cause any danger neither for the operator’s skin nor eyes. The laser may be adjusted by means of a stepper motor manufacturers driven depth-axis from two push buttons in the external operation panel. The laser safety cover includes integrated vacuum piping for extraction of particles and contaminants created during manufacturers of laser marking. Different accessories needed during the marking process may be clamped right-angled to the marking area on the base plates of the turntable. For positioning workpieces the housing includes at one side a set-up door with integrated laser protection glass. A switched power socket for external accessories is provided at the rear panel of the housing. The laser turntable may be connected to all different standardized voltage supplies. Cable installation between laser and laser safety housing is daisy chained and interlocked to ensure user safety during laser operation. The cover is color-coated in grey. |
|
| The industrial professional laser safety housing LSG100 enables to mark workpieces inside the marking area of the laser (110 x 110–180 x 180 mm) according to laser protection class 1. The laser cell eliminates any risk of laser radiation to the operator’s skin or eyes.The integrated focus finder used to adjust the focal length ensures a fast setup time for marking products of different sizes. Focus finder adjustment is controlled by means of a stepper motor supplier driven Z-axis from two push buttons in the integrated operation panel or by a serial interface at the PC. Backlash free z-axis adjustment with ball bearing manufacturers spindle and guide is ensured. The manufacturers of laser marking area may be internally illuminated for user observation. The laser cell includes integrated vacuum piping for extraction of particles and contaminants created during laser marking. Different accessories required during the marking process may be clamped right-angled to the marking area on the base plate. Furthermore, the working area is optionally air-conditioned. The housing is made out of solid sheet metal and may be moved either on industrial rollers or placed on machine mounting pads.The machine’s substructure includes an integrated 19” PC. Moreover, a swinging arm provides support of professional keyboard and monitor for the operator’s ease and convenience. |
|
| The cab Professional laser type plate module THS4 provides to mark plates of steel, aluminum and plastics.The system’s handling is centralized in one separate unit and is therefore most suitable to be integrated into the cab laser safety housing LSG 100. The handling provides to work off inflexible type plates. They must be with a tolerance, be plane and free of burr. The handling provides an automatically tracked in- and output magazine. While the input stack undertakes an upwards motion the output, i.e. the destacking magazine moves downwards. The laser always marks the top level plate of the stack. After having been marked the plate is removed from stack by means of a vacuum gripping pliers and forwarded to the output magazine by linear drive. Then, the stack is automatically moved up so that the level where the plates are marked remains the same height. Type plates with different thickness are automatically identified by the help of a sensor.The magazine’s side professional guides are adjusted by slotted holes and locked by cylinder head screws. 2 sides of the magazine remain fixed to maintain the angles’ alignment. The device thus has a fixed zero point in relation to the marking field of the laser system. For shifting the magazines one allen key is required and for modifying a time of maximum 10 minutes is needed. The software of the laser provides the logical control of the type plate marker. This software is included in standard delivery and contains appropriate routines. |
|
| As biggest European manufacturer of Thermal Transfer Printing systems cab Produkttechnik GmbH presents a further innovation - the cab professional laser professional label marker LM. Based on the cab Ytterbium fiber laser, acrylic labels or colour laser film can be marked in high resolution and be cut optionally in different sizes. Due to the high impulse frequency, industrial fiber lasers can mark with maximum speed. The largest roller diameter of labels and continuous material is 300 mm. There are two machine types available with different marking resolution and marking area.Laser labels are used for security-relevant identification and can be self-destructive as an option. Applications are in the electronic-, automotive industry and in tool building. cab offers a variety of interfaces to databases, ERP systems and SAP. By the use of Ccd camera specification systemn labels can be verified according to DIN/ISO standards. |
|
| cab has expanded it's product range in the area of professional laser systems with focus on the development of the Ytterbium fiber laser manufacturer systems FL10 and FL20 which can mark on most diverse materials like steel, aluminum, precious metals and plastics.The laser marking systems consist of a laser source and a fiber-coupled galvo head.Different F-Theta Lenses are available. (100/160/254)The development of the FL series especially focuses on industrial use. The professional diodes have a MTBF of more than 50.000 hours.The high focused laser beam and first pulse suppression provide marking results up 1000 dpi - perfect conditions for marking two-dimensional codes. Even at high ambient temperatures the laser systems are working most precise and fast. Fiber laser systems are adjustment-insensible and maintenance-free. The integrated diagnostic system shows the device's status. Either modules or the whole device can be exchanged fast and easily.cablase provides both a multilingual user interface and a freely programmable COM interface. In addition the possibility to control and to supervise external NC axes and digital in- and outputs is provided. |
|
| The cab professional laser typeplate marker transports and marks flat and inflexible workpieces with a thickness of up to 3 mm. Maximum size of the type plate is limited to 100 x 50 mm. The laser marker is most suitable for marking materials like aluminum, steel, copper, glass or plastics. The workpieces are conveyed in a fully automatic manner from the input magazine to the marking area and from there to an output magazine. If different sizes of workpieces are marked the magazines and slide-in unit must be interchanged. The logical order of the typeplates is kept during transport. Individual orders may be worked off and ejected in a separate output device. The handling system is controlled by an integrated Siemens S7 MANUFACTURER OF PLC. All transport and marking functions are controlled from the PLC operator control panel with integral digital display. The system requires r compressed air supply. The laser’s operational status is indicated by an indicator light. A separate machine table may be supplied, if required. |
|
This technology of marking high quality is characterized by a single flexibility.
ÖSTLING proposes a range of industrial lasers Nd to you: YAG with professional diodes and light among most complete of the market.
From 6 to 150 W!
Able to answer the industrial applications most severe, these lasers are available in integrable model, semi-automatic station or specific configuration. |
|
ALLTEC LC100: LESS POWER – MORE PERFORMANCE
• Fast and expressive: excellent marking quality, reliable legibility and extreme reproducibility thanks to advanced high-speed technology.
• Higher yield: more information at high speed, from multi-line texts through graphics to machine-readable codes.
• Simple installation thanks to flexible beam delivery options and a unique communication concept.
• Better marking with high definition precision optics in an exceptionally large marking field.
The ALLTEC LC100 laser marking system delivers high resolution marks on products such as packages (labels, paper, carton, glass, PET, plastic tanks, tubes, cardboard cartons, etc.), automobile parts, electronic/electric components, electrical appliances and extrusion products as profiles and door/window sealings.
This professional laser stamping system is well-suited for applications in the food, beverage, pharmaceutical, cosmetics, automotive and electronics markets.
ALLTEC LC100 marks expiration/ manu dates, ticket numbers, line codes, ID matrix/barcodes, logos, symbols and individual data. ALLTEC’s new 10 Watt laser marker also accepts most common data formats to enable use of standard CAD and graphics programs.
|
|
Videojet 3120 Laser marking system
The Videojet 3120 is the fastest industrial laser marker in its class producing consistent high quality, multi-line codes even on high volume production devices.
- Superior Speed and Quality: reliable, high quality, permanent marking with no degradation of print at high line speeds
- Complex Marks: multi-line alphanumeric codes, foreign language fonts, graphics, symbols and machine-readable codes
- Easy Integration: compact design, a variety of industrial lenses and beam expanders with flexible user interface professional software |
|
| Trotec’s Speedy 300 offers a Co2 laser machine that is specially designed to deliver top productivity for all types of applications - including industrial laser machine engraving and marking, as well as laser sawing and etching. From the minute you look at the Speedy 300, you can see the quality construction and design excellence that sets this CO2 laser system above its peers. What you can’t see from the outside is that the same level of quality is designed into the laser system’s body – reflected in its state-of-the-art motion system, electronic components, optics, work platform and laser tube. |
|
| Trotec’s Laserati Carbon dioxide laser system is specifically designed to support the laser engraving, cutting and manufacturers of laser marking of high-volume, heavy-duty applications, such as the mass production of rubber stamps and other dust-intensive industrial laser materials. The Laserati CO2 laser delivers the highest quality results, with minimum maintenance. All sensitive components are protected by our unique In-Pack Technology to minimize contamination from smoke and debris. This also reduces production time, leading to both increased outputs and higher profits. The Laserati CO2 laser system is also useful for other laser marking and laser engraving jobs, such as the production of signs, woodworks, professional displays, stencils, and more. |
|
The Concorde is a computer controlled compact, self-contained CO2 system. This lightweight system, with its 360o rotating head, makes it easily integrated into a CDRH compliant enclosure.
Available in 10, 25, and 50 watt power
Long life CO2 tubes- 20,000 hours before recharging
Easy to use marking software included
High speed marking head with built-in error correction
Mark either stationary or optional "on the fly" |
|
Compared to conventional flatbed professional lasers, the Trotec Vmax is a Galvo System. Due to this technology, very high marking speeds can be achieved. The Vmax can be integrated into existing production centres, but can also be used as stand-alone solution. Further requirements to the Vmax very often are very high marking speed, marking on the fly, easy and fast marking of data coming from ERP systems, small marking area required.
|
|
Laser type: CO2, water cooled or air cooled
C-series products, CO2 vector industrial lasers for industrial use, are available for high-quality laser coding.
Mark your products permanently and flexibly, either while stationary or during movement of the product (MOTF), and you benefit from innovative technology from a single source.
|
|
QUADRA CO2
The QUADRA series perform one of the most complete solutions available on the market for the buttons marking and engraving with a Co2 laser. QUADRA is able to automatically select, load, centre, mark (on the face and on the edge) and unload more on 100 buttons/min. with a size 12-60 Lin and 10 mm of thickness. For any button QUADRA is able to do automatically a visual check of the quality and discharge the rejected pieces and the correct positioning and centering of the marking in function of the button holes position. |
|
THUNDER 1 and THUNDER 2
Professional laser Type : CO2 / Yag / Fiber. The exclusive solution for speed and flexibility. The possibility to make marking , engraving and cutting operations using both galvo and plotter systems, the laser with up to 600 Watt power available, the capability to machine in continuos on a working area up to 2.000 x 1.000/1.500/2000mm |
|
The PLIII is a plotter with elevated performances is of speed that of acceleration equipped with source professional laser CO2 high-quality and long duration.
These characteristics allow the machine to catch up a high speed in the short time, thus concurring with the customer to execute the workings in reduced times a lot.
The PLIII moreover is equipped of a system of modulation of the beam that facilitates the maintenance of the laser at call and a red gunlayer () that it facilitates the operations of centratura of the piece.
The driver of writing it has an interface function customer who allows the user to replace the language of dialog with that wished.
The PLIII comes supplied with a workspace of 610mm x 457mm (24 x 18 in),
- motorized axis Z
This PLOTTER extremely precise laser, reliable express and, is particularly apt to the labelling to high speed of polyester, wood, skin, ceramics, jeans, leather, marble, glass, superficial enameled and material organic. |
|
Apparatus professional laser with source to C02 lamp sealed with powers from 30 to 200Watt entire planned and realized from the Tullio Giusi spa.
Thanks to the technology with system of transmission of the laser beam to scanning head, can be obtained labelling high-quality and precision on on an immense range of natural materials, be polyestere, woven and meths-acrylate
Our laser can be easy inserted on existing production systems. Upon request, the Tullio Giusi spa can realize complete solutions of labelling, adapted to the specific requirements of every user |
|
OEM SC-CO2
The OEM professional laser subsystems SC- CO2 series represents the “eternal” tool, always sharpened, easy to install on any Cnc milling centre centre to mark, engrave and cut materials like glass, wood, plastics , paper, professional fabric , rubber , marble and stones, metacrilate, leather and more others. Thanks to the immediate “plug and play” installation with any CNC machine or production centre , the SC series is the ideal solution for any machine builder to differentiate the product with an “aggregate” essential for some operations not possibles to do ... |
|
Unit professional laser with applicable C02 source on blots some automatic and on production centers
Entire planned and realized from the Tullio Giusi spa using sources and efficiency.
Thanks to the system of transmission of the beam laser to head of galvanometrica scanning, can be obtained markings high-quality and precision on natural materials and plastics
Laser WINNER comes supplied with powers to chosen between 50 and 60 Watt.
Thanks to its versatilitŕ can be easy inserted on existing production lines or arrange automati us of feeding.
Upon request, the Tullio Giusi spa can realize complete solutions of marking, adapted to the specific requirements of every user.
Technical characteristics
Wavelength of emission (10640 nm)
Sealed optical distance
Highest quality of the bundle laser
Spot of writing ridottissimo
Stability in power
Cooled source to liquid in order to guarantee the maximum efficiency with elevated temperatures ambient.
Software
Software WINPROGRESS entire realized of the Tullio Giusi, beyond using files vectorial the more municipalities, is in a position to managing static witnesses, dynamic numerations, markings on cylindrical objects, codes professional barcode, datamatrix and, at call, managing markings on pieces in motion (MARKING ON FLY).
Types of files usable:
Hewlett-Packard HPGL (.PLT) AutoCAD (DXF) Rich Text Files (.RTF)
Languages:
Italian, English, Turk, Spanish, Portuguese, German, French
Usable characters:
font True Type Windows (.TTF)
font special monoline GiusiLaser (.PLF) |
|
The FineMarker Hybrid incorporates MultiWave Technology™. Patents are pending on the proprietary technology.
The industrial lasers are installed on Trotec’s proven plotter type flying-optics motion system that has an active work area of 29" x 17" (730mm x 436mm). Combining these two laser sources increases the range of materials that can be processed with one laser. Marking, cutting and engraving are all possible depending on the material. The operator has professional software control over the laser source by defining the colors in the layout file so that both sources can used in one application.
The FineMarker Hybrid is capable of marking text as small as 1pt., machine readable 2D barcodes and JPEG images. It offers unique solutions for many identification applications that were either previously not possible, or difficult to do with a laser including marking on polycarbonate and day-night professional displays.
|
|
ProWriterTM F20
Blazing Fast Marking Times
High Repetition Rates Providing High Production Throughput
Exceptionally Clean Marks with little Heat Affected Zone
Means no detrimental effect on sensitive applications
High Contrast Marking Ratios
Important for Character & Logo, Visibility, Professional barcode & 2D Matrix Code Readability
Excellent for Marking : Metals, Plastics, Ceramics, Composites & More!
Annealing - Black surface marks on metals created by bringing carbon to the surface
Surface Etching - Creating high contrast surface marks by changing the material characteristics without material removal
Ablation - Shallow, permanent marks with some material removal
Engraving - Deep marks in all materials for performance or 2D, 2˝ D and 3D effects
Ultra Compact Marking Head Design for Easy Integration into any Automation System
Integrated Fiber Laser coding systems for all Industries - Automotive, Aerospace, Commercial, Electronic, Medical, Tools & Tooling, Packaging, and Trophies & Awards
Automatic, Semi-Automatic, and Manual Parts Handling devices
Most Powerful CAD/Graphics Based Software in the Laser marking Industry - Professional laser Marking Studio
Total Software Control of all Marking & Engraving Processes with our Graphical Point & Click Interface
Advanced Interface for Seamless Coupling of Automation and Marking Parameters
3D Layering of CAD & Graphics Files
Most Comprehensive list of Barcodes & 2D Matrix Codes - includes free updates for two years |
|
With the entry model FC 100 Trotec has developed the world’s first series-produced flatbed professional laser system with cw - fiber laser manufacturer source. In this inspired combination the FineMarker 100 unites the advantages of both technologies.
The FC 100 from Trotec combines fiber laser technology with the reliable Trotec flatbed concept. In contrast to the standard galvo laser, the FC 100 offers a large working area on which either a few large or several small work pieces can be processed in one marking procedure.
|
|
|
Laser marking and engraving
