|
|
|
|
|
|
Pearson Packaging Systems' CS40-G Case Sealer is the newest addition to the Pearson product line. This fully-guarded case sealer is available in either mild or stainless steel construction. The CS40-G will top seal a wide-range of case sizes with hot melt glue at speeds up to 40 cases per minute.
Designed to Perform
Pearson's CS40-G is a fully automatic case sealer that includes a host of new and innovative features. By utilizing continuous motion and Pearson's innovative Compensating Independent Roller System™ (patented) and our Synchronous Drive System™, the CS40-G will consistently and reliably seal cases weighing up to 65lbs (29.5Kg). Need to go faster than 40 cases per minute? As the length of the case gets smaller the machine will seal cases even faster. Plus, with the newly designed, externally accessible adjustment points, changing over to different case sizes is easier and quicker than ever.
Reliability Plus
The Pearson CS40-G Case Sealer is engineered for safe, reliable performance. Like all Pearson machines, the CS40-G is constructed using only the highest quality components. Plus, each design is rigorously tested by our team of Six Sigma quality experts before any machine is shipped. Our manufacturing and quality control processes ensure reliability in the most demanding production environments.
Every CS40-G is supported by Pearson's team of service and technical support professionals who are available 24-hours a day, 7-days a week-worldwide.
|
|
|
|
|
|
Pearson Packaging Systems' CS40-T Case Sealer is the newest addition to the Pearson product line. This compact, fully-guarded case sealer is available in either mild or stainless steel construction. The CS40-T will top seal a wide-range of case sizes with pressure sensitive tape at speeds up to 40 cases per minute.
Designed to Perform
Pearson's CS40-T is a compact, fully automatic case sealer that includes a host of new and innovative features. By utilizing continuous motion and Pearson's innovative Compensating Independent Roller System™ (patented) and our Synchronous Drive System™, the CS40-T will consistently and reliably seal cases weighing up to 65lbs (29.5Kg). Need to go faster than 40 cases per minute? As the length of the case gets smaller the machine will seal cases even faster. Plus, with the newly designed, externally accessible adjustment points, changing over to different case sizes is easier and quicker than ever.
Reliability Plus
The Pearson CS40-T Case Sealer is engineered for safe, reliable performance. Like all Pearson machines, the CS40-T is constructed using only the highest quality components. Plus, each design is rigorously tested by our team of Six Sigma quality experts before any machine is shipped. Our manufacturing and quality control processes ensure reliability in the most demanding production environments.
Every CS40-T is supported by Pearson's team of service and technical support professionals who are available 24-hours a day, 7-days a week-worldwide.
|
|
A complete reliable, versatile and workable range of automatic and semi-automatic machines for the closure of American style cardboard boxes with a strip of adhesive tape or gummed paper. Operating since 1975 we have gained the trust of big and small companies alike both in Italy and in Europe. The unique and advanced characteristics that feature on our machines, above all on the taping machines for gummed paper, make them unrivalled and reliable up to the present day.
ICMI specializes in custom made machines, finding solutions to satisfy all our customers’ needs.
Among our many solutions, there could be one that is suitable for you and if not, we can all talk together to find a solution that is right for you.
To complete our range, we have a large selection of taping machines for adhesive tape by DNC (E), economical and competitive with others on the market today. Products produced by DNC (E) are only available in Italy.
|
|
Sealing cartons using a carton sealer is faster, provides a better result and is more economical. Using a carton sealer also ensures ergonomically correct working conditions.
The carton sealers are designed for a variety of different tasks and needs: uniform or random carton sizes, wide or narrow tape, top and bottom sealing, side sealing, automatic flap folding etc. There is a wide range of auxiliary equipment such as packing tables with bottom flap folder.
The carton sealers may be used as part of individual packaging stations or as part of a fully automatic packaging line.
www.socosystem.fr/Popup/F-100.aspx
|
|
Need reliable tape sealing? Hot melt adhesive sealing? Both? We’ve got you covered, with a workhorse machine built with interchangeable sealing modules that make it easy to convert from adhesive to tape. Or tape to adhesive. And back. With a super small footprint (only 10’ long) and A-B-C’s trademark rugged construction, this sealer will satisfy your most challenging sealing requirements.
Quality components include a pacer-belt case transfer that automatically feeds and spaces cases for precision sealing, a rotary tucker for smooth, high speed flap folding, and flexible compression rollers for secure adhesive sealing. For quality, value, and versatility in a production case sealer, choose the Model 436 from A-B-C.
|
|
Combi XL Sealers
The TBS-500 is part of our XL equipment line for handling the widest range of oversized cases.
Erectors and sealers feature right or left hand execution
Heavy-duty oversized components
Easy no-tool setup using crank adjustments
Heavy-duty welded tubular steel framework
easy load walk-in case magazine
safety interlocked machine guarding
From our 2-EZ Xl to our TBS-500, we offer a range of solutions for erecting and sealing. even our Ergopack handpack system has been scaled up to transform your large case handling headache into an efficient and space saving operation.
Features
Erectors and sealers feature right or left hand execution
Heavy-duty oversized components
Easy no-tool setup using crank adjustments
Heavy-duty welded tubular steel framework
easy load walk-in case magazine
safety interlocked machine guarding
|
|
TBS series Case Sealers
The newly redesigned TBS-100 case sealer is the heavy duty solution for a wide range of case sealing applications. The welded tubular steel fits a wide range of applications and is integrated with many Combi systems. This workhorse features extra heavy duty construction and oversized motors and drive components. The TBS-100 is a modular system that is adaptable to many applications including top and / or bottom sealing, and many flap folding configurations.
Combi Case Sealer Features:
Seamless controls integrated with case loaders or erectors
Heavy duty welded tubular steel construction
Safety-interlocked guarding
Dual over-sized motors
High-speed operation up to 50 cases per minute
No-tool crank adjustments for changeovers
Automatic indexing
Four flap folding
3M Accuglide II+™ tapeheads
Available in top and/or bottom only models
Available in stainless steel and water washdown configurations
|
|
|
The Supertaper™ ST1A Automatic Case Sealer is a premium grade automatic case top taper that folds the and seals case top flaps with tape or optional hot-melt glue.
|
|
SR4 – SR46
Semi automatic carton sealer - automatic adjustment on different box sizes
Centring Unit to keep the boxes centred and stable during manual filling.
Top & Bottom motorized driving belts (2 x 50 mm wide each)
Driving Belts speed 20 mt./min. Motors 0,13 HP
2 taping heads K11 50mm width – (K12 - 75mm wide on request)
Adjustable working high 500 – 750 mm.
Working cycle:
Boxes filled with flaps closed touch the switch on the top taping head frame that moves it up till the box high, the driving belts transport the box through the machine sealing the box top & bottom flaps
Box dimensions
SR4 SR46
Min. W. 140 H. 110 L. 150 mm Min. W. 160 H. 100 L. 200 mm
Max. W. 650 H. 650 L. = = = Max. W. 500 H. 500 L. = = =
TRADITIONAL ACCESSORIES
Casters
4 wheels with clutch
RN04 – 500 mm. Long / RN1 - 1 m. Long (other on request)
In feed rollers conveyors – 500 mm – 650 mm Wide
GTL500/3 – 650/3 (other on request)
Out feed Conveyor Flexi Extendable from 1.5 up 4.5m L. – 500/650 mm Wide
|
|
The NASTROPACK line is the ideal solution to tape-seal automatically standard- or random-size carton boxes. Manual or automatic adjustments allow the setting of the machine to the required box size. The top and the bottom flaps are simultaneously sealed (the carton box must be introduced into the machine with the top flaps already closed).
These machines work with PP adhesive tapes with width up to 60 mm and core diameter 75 mm.
Visit our website for all the NASTROPACK MODELS.
Machines made according to CE rules.
|
|
LD-16A
24 hours/365 days per year reliability are what you can expect from this Heavy Duty fully automatic top and bottom case sealer for applications involving large runs of boxes. Box adjustments can be made in less than one minute. Plug -in operation, minimal operator training make this compact, 77" length sealer, an assembly line workhorse. Also available in Bottom belt and Side belt.
|
|
« HOT-MELT » BOX SEALER
Top-Bottom sealing for a range of box formats. Semi-automatic HM 900
or automatic HM 1200
STANDARD FEATURES OF HM 900 & HM 1200 SEALERS
- top/bottom sealing, using the « MELTON » hot melt system
- programming of adhesive strip lengths
- « pistol purge » function
- integrated box squaring function
- adjustable output rollers
|
|
|
Here's a tape case sealer that can handle real-world production demands. It's built tough for high speed, three-shift-a-day case sealing operation. It seals cases squarely and securely, with A-B-C's exclusive case-squaring flight lugs and contoured flap folders. It's sensibly designed with quality components, built into the heavy stainless steel frame, to virtually eliminate downtime for maintenance. For a case sealer built to fulfill your production needs today and in the future, choose the Model 30 tape case sealer.
|
|
Top-bottom sealing with lateral guide belts. Chassis mounted on 4
directional casters
DIMENSIONS
Length in mm : 900
Width in mm : 825
Height in mm : 1355
Weight in kg : 87
TECHNICAL CHARACTERISTICS
Speed (appl.) : 15 - 20 /mn
Belt speed : 20 m/mn
Voltage : 380 V
Frequency : 50 Hz
Power : 0,36 KW
|
|
Semi-Automatic Sealers for Uniform Cases
LD-7
An economical top and bottom case taper with a small footprint for sealing large runs of uniform cases, or for those applications that require infrequent case size changes.
|
|
GEM XF62 HS represents the acme of Comarme technology and the ideal
solution for every fully automated end of line.
GEM XF62 HS was designed to meet the highest demands, always aiming
at constructional strength, quality and reliability, the current key feature of the
new range of Comarme machines. GEM XF62 HS, an automatic machine
for closure and sealing with adhesive tape of boxes with variable format,
carries out a series of operations which make it flexible for every use.
The boxes, coming from several filling lines, are conveyed into a single
closure station. The machine closes the four upper flaps of the boxes,
adapting to the various sizes of the incoming boxes and then spacing them,
each process performed automatically.
The boxes are later sealed with adhesive tape, thus completing the work cycle.
|
|
CORRUGATED CASES SEALING MACHINE - FS 15
Production speed : 15 boxes / min
Adjust automatically to the format of the case (identification of the format by bar code reading)
Ideal for the integration of a packing line treating multiple formats of corrugated cases
|
|
Machinery designed to seal cardboard boxes by applying adhesive tape, adjusted to the size and quality of the boxes (incl. weight, size, volume).
* The SK2 is equipped with a powered transport system both at the top and bottom to ensure equal transport of the boxes.
* The S 8 is equipped in a side-transport system which is highly suitable to seal empty boxes.
|
|
|
|
|
|
Semiautomatic taping machine which seals with adhesive tape the upper and lower parts of fixed-format boxes with manual adjustment.
GEM350/360 is especially suitable for sealing tall, narrow boxes as four belts, two upper and two lower ,horizontal and parallel to the work surface, are used for conveying.
GEM 350/360 can also be used for irregularly shaped boxes. The use of a single motor for driving the four conveyor belts simultaneously is totally innovative and patented, allowing smooth and even feeding of the boxes.
The speed of the upper and lower belts is in fact the same in mechanical terms. The upper taping unit has a patented system which, by regulating a spring, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed. Adjustment by means of handwheels is easy and fast, enabling use by non-specialist operatives.
Main machine structure in bent, bolted and painted sheet steel. The boxes are fed by mean of 4 flat drive belts, 2 bottom and 2 top, driven by a single motor. The regulations for the various formats are carried out using hand-wheels
|
|
Semi-automatic carton sealer with manual adjustment. Easy to be used and simple to be adjusted, it can be started by any operator in few minutes. It allows a perfect closing of the box by adhesive tape thanks to the double top and bottom driving system and the super reliable taping unit K11.
The carton sealer has been designed and built according to the CE 392 Machine Directives and subsequent revisions.
|
|
|
The Lantech automatic case sealer handles all types of flutes, double wall and single wall, and most common size cases. No scheduled maintenance or periodic lubrication required.
|
|
HM-1500
Gluing machine Freestanding
Output: 1500 cartons/hour
The automatic carton closing machine HM-1500, freestanding version, is used to close cartons with hot-melt glue.
The machine receives the cartons filled with the product directly to the carton packer Serie MEGA. This machine is linked with conveyor belts.
The introduction, the carton spacer, the closing of the superior layer and the hot-melt glue application are automatic operations.
The machine has got a closer-layer system that is suitable to close rigid carton.
The intervention of the machine operator is only necessary in order to regulate the machine to take cartons of different sizes. It is a very simple operation which does not required skilled labour.
|
|
Hot Melt Glue Case Sealer - Wexxar WSH
The WSH is a fully automatic hot melt glue case sealer. Compact, versatile case sealers for top seal only or top and bottom seal. Stationary major flap folding and internal platen-compression system ensures perfectly butt-jointed and aligned flaps.
- Heavy duty compliant side drive belt transport through the machine: gentle to the product yet powerful enough for the heaviest loads
- Excellent accessibility for operation, set-up and service with convenient centrally mounted electrical controls and adjustability from both sides
- Interlocked safety guarding
- Corrosion resistant finished throughout
- Equipped with choice of Nordson or ITW Dynatec hot melt system
- Space saving compact footprint
- PLC (Programmable Logic Controls) equipped
|
|
CXFA
Features:
- The width & height of carton are adjusted by automatic pneumatic system and it is suitable for the fully-automatic packing system with various sizes of cartons.
- The top flaps of the carton will be automatically folded and be sealed smoothly at a time. It will save the labor and a lot of time.
|
|
NS-1000
Taping machine
Output: 600-1.200 cartons/hour
The automatic carton closing machine with adhesive tape, series NS-1000, is particularly suitable for closing cartons on top and bottom with adhesive tape.
The machine receives the cartons filled with the product straight from a cartoning machine or from conveyor belt and it close the cartons with adhesive tape.
The machine is fitted with a pneumatic flap-folding device for closing flaps on especially stiff cartons.
|
|
Pressure Sensitive Case Taper - BEL 252 Overview
The BEL 252 is a fully automatic, pressure sensitive uniform case taper. It is an affordable high quality fully automatic case taper that offers highly advanced production duty design. No other brand of automatic case taper compares with the BEL 252 for compactness, safety, quality of construction, operating performance and value.
The BEL 252 pressure sensitive case taper is equipped with DEKKA High Performance stainless steel tape heads and the exclusive BEL Snap Folder system providing sealing speeds up to 25 cases per minute. Quick three step size change with simple hand wheel and clamp adjustments enable the BEL 252 to seal a wide range of case sizes.
The BEL 252 fully automatic uniform case taper is a perfect choice for the production packer looking to automate case sealing lines at a practical cost.
|
|
|
|
|
|
CX3 Features:
Equipped with top and side double-belts can transport both heavy and light cartons and keeps sealing on the center of cartons.
suitable for various carton sizes for adhesive tape sealing, with compact design can be used in many different working spaces
Simplified operating device can easily to fit different shapes of cartons and seal two tapes on top and bottom at one time.
Durable and stable driven belts can provide operators with working ease when proceeding continued sealing applications.
Could be worked with other auto packaging equipments among the process such as auto strapping machinery with sensors.
by using advanced peak type cutting blade can easily cut off adhesive tape not to jagged or tear to shred.
Optional extensive working tables can integrate various packaging equipments working on a packing line.
Specifications
Power Supply 1 Phase 110V/220V/240V
Packing Size Max. : 500W x 500H mm Min. : 150L x 150W x 130H mm (under 2"Tape) 170L x 150W x 130H mm (under 3"Tape)
Tape Width 50 mm (2") or 76 mm (3")
Working Table Height 580~780 mm
Sealing Capacity 20 cartons per Minute (Carton: L500 mm, Power: 60HZ)
Dimension 880L x 900W x 1210H mm
Net Weight 165 Kg
|
|
|
|
|
|
The TSC-090 seals and closes top-loaded tri-seal paperboard cartons and is ideally suited for applications in the food, bakery, pharmaceutical, and frozen item markets. It features an innovative in-line closing process that closes the top lid and major and minor flaps after gluing, while maintaining the carton in a single forward motion. Many conventional tri-seal carton closers mechanically turn the carton during the closing process, creating the potential for errors and misalignment. By eliminating the turning process, the TSC-090 reduces the threat of malfunction and associated downtime.
The TSC-090 closer is capable of speeds of up to 90 cartons per minute and handles a broad range of carton sizes. Continuous positive carton control throughout the closing process ensures accurate closing to minimize downtime. The machine features integrated feeding belts for smooth operation. Servo controlled machine adjustments guarantee repeatability and accuracy and an open frame construction assures easy cleaning and maintenance.
Changeover between size parts is achieved in 15 minutes and standard changes require no tools. The closer is typically integrated with top loading equipment, such as Delta robotics, and a carton forming system, also available from Bosch.
|
|
Automatically closes and seals randomly supplied tri-seal top load cartons
Straight line tri-seal carton closer
Accepts cartons randomly or back to back
90 degree bump turn with on demand servo powered carton squaring section
No mechanically synchronized running parts.
Overhead drive conveyors with flexible grippers
On demand, servo powered right angle carton transfer section
Powered side compression/discharge belts
No-tool size changeovers with digital readouts
Metric construction
PLC control system with touch screen interface
Washdown construction
Speed: Up to 150 or 200 cartons per minute depending on configuration
Full safety guarding
Casters and leveling feet for portability
Integrate with a packing conveyor and AF, AFB, or AFC carton former to create a complete Top Load Packaging Line
Ink Jet or Laser coding is also available
|
|
|
|
