|
|
The Red Rooster range of manufacturers of hoists is widely used both on- and off-shore, throughout the world; typically in marine, shipbuilding, chemical and petrochemical, food, paint and papermaking industries, wherever reliability of performance and safety in use are paramount. Red Rooster air manufacturer of chain hoists are compact in design and low in headroom. The hoists have infinitely variable speed, and are rated for continuous use.
Another advantage of the air hoists is the soft start and stop. Air hoists do not impose shock loading during acceleration and deceleration. The Red Rooster air hoists are of compact construction with cast iron bodies for durability and safety. |
|
Electric chain hoist particularly designed for theatre and staging applications for loads of 125 to 2500 kg.
STAGEMAKER COMPACT is specifically designed for mechanical handling of theatre and stage equipment. It enables sound, lighting and decorative professional fittings to be positioned and supported safely.
The technical characteristics and upgrade ability of STAGEMAKER have established its essential role in numerous international events whether they could be cultural, sport or commercial. |
|
| The DC-Pro chain hoist manufacturers for loads up to 5,000 kg is a fully featured, highly versatile chain supplier of hoist, which can be installed and put into service in a minimum of time. It is extremely user- and maintenance-friendly and features an ergonomic design with a high standard of safety and reliability. The particularly long service life (FEM 2m+) provides even greater operating efficiency. |
|
Housing
- Cast aluminium housing with maximum solidity (no plastic material)
- For extreme working conditions: casted cooling gills
Motor
- Design for tough working conditions
- Normal, fast and super fast speed models available
Transmission
- Helical-toothed first and second gear step for quiet running
- Permanent lubrication for wear resistant operation
Brake
- Maximum safety (construction: brake after slipping professional clutch)
- New advanced brake design
Slipping clutch
- Simple and precise adjustment
- Maintenance free and highly resistant to wear
Chain guidance
- 2-part construction to optimize maintenance
- Reinforced plastic material highly wear resistant
Chain wheel
- Made of hardened steel
- With additional chain pockets (4 mm): hence quiet running
Hoisting chain
- Zinc plated
- Surface-hardened
Geared limit switching (standard)
- Simple adjustment
- Exact positioning
Contactor control system
- Simple technology (no electronics susceptible to interference)
- 42 V control system allowing highest safety of operation
Control switch
- With built-in support wire as a standard
- 2-buttons: design especially ergonomic
|
|
Low headroom version
designed specially for low ceilings
block adapted to the load
|
|
This endurable "colleague" makes your purchasing decision easy:
Using our SILVERLINE hand chain block the lifting and lowering of loads is achieved by pulling the hand chain %u2013 whilst the load pressure holds the load securely. As standard our SILVERLINE lifts loads from 500 kg up to 10000 kg and offers the option of larger lifting heights (standard 3 m) and the mounting of a chain professional container.
|
|
Demag DCM-Pro Manulift:
The DCM-Pro Manulift was developed for handling loads quickly and safely with only one hand. The new DCM-Pro is based on the lifting unit of the DC-Pro manufacturer of chain hoist and the DSM-C control unit which is connected to it by a helical cable. Thanks to the control unit which is rigidly connected to the load handling attachment for right and left-handed operation, the operator only needs one hand to operate the chain hoist specifications and guide the load. |
|
Synchronized supplier of hoist low headroom 2 falls
for absolutely synchronised raising and lowering
for long and bulky loads
assures precise positioning of the loads
Synchronized hoist normal headroom 2 falls
specially for high rooms
for absolutely synchronised raising and lowering
for long and bulky loads
assures precise positioning of the loads
Synchronized hoist 4 falls
for absolutely synchronised raising and lowering
for long and bulky loads
assures precise positioning of the loads
prevent rotating or pivoting of the load
|
|
STAHL CraneSystems's ST manufacturer of chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain supplier of hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
Eurochain VL is the solution for all your lower and medium load hoisting applications. One of a new range of high-tech hoisting units, Eurochain VL is perfectly adapted to your industrial requirements.
Furthermore, in order to meet your hoisting and mechanical handling needs in the possible way, Eurochain VL can be fitted to manually-driven and electric trolleys mounted into monorails, jib cranes, overhead handling lines or EOT cranes. |
|
STAHL CraneSystems's ST chain hoist manufacturer programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist manufacturers is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
STAHL CraneSystems's ST chain hoist manufacturers programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain manufacturer of hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
ABUS Electric chain hoists are available for a safe working load up to 4 tonnes and feature user friendly advantages such as:
Extreme low headroom, dual speed lifting as standard, brake linings with exceptionally long lasting wear characteristics as well as a large variety of additional features.
|
|
The DMK electric chain hoists respond to the needs of the international markets which require products of guaranteed quality with a wide range of uses, long-term reliability, safety guarantees in all phases of operation, and excellent value for money. The DMK hoists manufacturer stand out for their careful and modern design putting them a the top of their category. The quality of the components, the high technology used in the production of the mechanical parts, in the finishes and in the surface treatments, the constant and checked quality system UNI EN ISO 9001 which covers the company's entire production, allow Donati Sollevamenti to offer a product in line with the latest international standards.
The special water-repellent paintwork is applied with an electrostatic process in complete isolation which guarantees its durability and a constant high performance, also in particularly hostile environments.
The DMK electric chain hoists are part of the lifting products range manufactured by Donati Sollevamenti, a leading company in its filed in Italy, and one of the leading companies in the world in the lifting equipment sector. The warranty lasts 3 years from the delivery date. |
|
STAHL CraneSystems's ST chain hoist manufacturer programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist suppliers is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
Basis on the Eurochain VL the EX version offer explosion protection according to EEx de IIB T4 degree (EN/DIN)as standard :
1 or 2 speeds hoisting motor (according to EExd IIB or IIC).
Pendant push button box with manufacturer of emergency stop button type EExd IIB or IIC.
Electric cubicle and cable plug according to EExd IIB or IIC.
Motor protection IP55 according to EN 60 529.
|
|
| The ST chain hoist programme from STAHL CraneSystems ranks among the most distinctive and comprehensive on offer. In use in thousands of applications for many decades, modernised and optimised over and over again, the STAHL chain hoist manufacturers is a classic. Powerful, reliable and undemanding as regards maintenance and power consumption. The ST series is available in 13 S.W.L. ranges, from 125 kg to 6,300 kg. It can be used as a stationary hoist with suspension hook or eye, with rigid mounting, or with a push or electric trolley, and is particularly suitable for rugged applications in industry. The extremely short headroom available as an alternative for every type optimises the effective hook height while keeping wear on the chain to a minimum. In addition to the standard designs, off-standard versions and individual solutions for customers are available. The STAHL ST chain hoist programme is also available in EX-protected design for Zone 1, Zone 21 and Zone 22. STAHL CraneSystems was the first manufacturer to convert the whole chain hoist programme to ATEX. |
|
| The ST manufacturer of chain hoist programme from STAHL CraneSystems ranks among the most distinctive and comprehensive on offer. In use in thousands of applications for many decades, modernised and optimised over and over again, the STAHL chain manufacturers of hoist is a classic. Powerful, reliable and undemanding as regards maintenance and power consumption. The ST series is available in 13 S.W.L. ranges, from 125 kg to 6,300 kg. It can be used as a stationary hoist with suspension hook or eye, with rigid mounting, or with a push or electric trolley, and is particularly suitable for rugged applications in industry. The extremely short headroom available as an alternative for every type optimises the effective hook height while keeping wear on the chain to a minimum. In addition to the standard designs, off-standard versions and individual solutions for customers are available. The STAHL ST chain hoist programme is also available in EX-protected design for Zone 1, Zone 21 and Zone 22. STAHL CraneSystems was the first manufacturer to convert the whole chain hoist programme to ATEX. |
|
~ Can be used as a work station manufacturer of hoist or as a production unit hoist
~ Lightweight, rugged and compact design
~ Capacities 250 - 1,000 lbs
~ Speeds up to 31 ft./min
~ Normal operating pressure is 90 PSI (capacities based on 80 PSI)
~ Standard Protector overload device
~ Variable flow, two lever pendant for precise load spotting
~ Threaded external exhaust for piping away exhaust in washing room or painting applications
~ Small, compact design for commercial & industrial applications
~ Gear train is lifetime - lubricated with non-oxidizing grease
~ Lifetime warranty against defects in materials and workmanship |
|
~ Hoistaloy load chain for heavy duty or stainless steel chain for spark resistant, medium duty loads
~ Positive action, heavy-duty professional shoe type brake that holds the load
~ Multi-vane rotary pneumatic motor for high torque, smooth operation
~ Accurately machined heat treated alloy steel spur gears
~ Spark resistant models available for hazardous environments
~ Pull cord or pendant throttle control available
~ Pull cord control manufacturer of hoists provide a lightweight, economical hoist for accurate control of loads
~ Made in U.S.A. |
|
| compact and light, insensitive with dust and moisture, pressure of use 6 bars, button box equipped with an emergency stop, controls precise speed, apparatus designed for intensive uses |
|
~ Up to 3 ton capacities for heavy-duty industrial applications
~ Gear train lifetime lubricated with non-oxidizing grease
~ Precision machined and hardened liftwheel with hardened chain professional guides for precise chain liftwheel fit
~ Gearing designed for exceptionally long life and quiet operation
~ H4 duty standard
~ Rugged control station (NEMA 4)
~ Manufacturers of hoist duty motor, standard Industrial protector overload device and standard screw type limit switches
~ Made in U.S.A. |
|
HSZ-A 619, 622,620,623
TBM Chain block have four types according to the different marketing requirements which are HSZ-A 619, 622, 620, 623.
Capacity ranges from 0.5T-20T, automatic double pawl braking system, double cover protection, light weight robust construction, Low effort to lift maximum load, Extra thick asbestos free friction discs. Fully forged hooks are fitted with safety latches as standard. Unique hand wheel cover for guiding hand chain at any angle, Built in overload protection device. ISO high grade alloy load chain, Zinc plated hand chain as standard.
|
|
TÜV-proofed TM-CHAIN BLOCKS and TM-LEVER BLOCKS with carrying capacity of 500 kg to 6 tonnes complete our manufacturer of hoist program. Both designs are delivered with an individual test certificate and a detailed instruction manual. They also have the following advantages:
- minimum effort to raise maximum load
- stocked with high grade chains in grade 80, protected against corrosion through galvanization and yellow chromating
- compact design
- pollution protected closed pinion gear
- weather protected automatic Weston brake
- durable baked enamel paint protection |
|
Demag introduces Model DC, a new generation of chain hoists. Precision quality with innovative features for added safety and serviceability.
- Plug in electrical connections
- Diagnostic service data
- Integrated 3 axis motion controls
- CSA approved
- 24 volt pendant control voltage
- Cycle and load spectrum monitoring
- Upper and Lower limit switches suppliers
- Slip professional clutch to prevent overloads
- High safety factor for load chain
- Gearbox lubricated for 10 years
- State of the art controls
- Long life low amp switching
- Easily adjustable pendant height
- Pendant or available with professional remote control |
|
~ high H4 duty cycle, up to 1,000 pounds and 300 motor starts per hour
~ 10 pocket oblique lay liftwheel provides longer chain wear
~ NEMA 4 industrial rated control station
~ Gear train lifetime lubricated with non-oxidizing grease
~ CM Industrial hoist Alloy Load Chain
~ Dual braking system - D.C. plus regenerative |
|
3 ranges: electronic hoist CPS, capacities of 125 kg to 500 kg, casing aluminum, thermal protection,...
Electric industrial hoist CPM, capacities from 250 to 2000 kg, 1 or 2 speeds of lift, groups FEM 1Am, hour counting and of startings, end of the road high and low electric,...
Electric hoist CPE, capacities from 1.6 to 10 T, 2 speeds, engine designed for high duty ratios. |
|
| Shh serie electric chain hoist have newest square shape complied with the international demand. the high intension aluminium alloy outline cover in very beautiful,light construction,strong corrosio resistance,which suitable for the high classification working.the distance between hooks invery small. unique friction professional clutch overload protection, which can protect the machine when overloading and overwinding. the column rotor taper breakong motor with dish reliable,low yawp,long using life.the bidirectional lifting limited confirm use safety.the carbonized load chain with high tension and abrasive resistance.high quality electric control component with low malfunction and high safety protection,new construction,modularze designing etc., which can assemble multiform with one economy,It's very convenient for repair and tear open.theproduct is complied with the up to date international standard. |
|
| ACI's single-phase electric chain hoists are among the most dependable on the market. The MH series was designed for heavy duty applications, which greatly reduces down time and operational costs. Ideal for mechanics and other shop applications, where lightweight suppliers of hoists and portability count. Operates on standard 110-120V AC, which means you can plug it in just about anywhere! The long fifteen foot power cord plugs into any standard outlet. No three-phase hook-up necessary! ACI manufacturer of chain hoists tolerate large loads with ease and require little maintenance. May be purchased on its own or bundled with a heavy-duty push trolley. |
|
Standard equipment
- 1 or 2 lifting speeds
- top professional hook on request
- mechanical overload protection
- IP 54 protection for motors
- F insulation for motors
- 48 V professional control device
- IP 65 push button pendant
- two speed or variable speed (frequency control) on request
- suitable for ambient temperature - 20° +40°
- thermal probes for two-speed motors
- professional screw of limit switch manufacturers on lifting, over 1000 Kg capacity |
|
... see all the products in the category
Hoists
|
|
