DN: 0.25 in - 2 in
Pressure: 0 bar - 21 bar
Temperature: 0 °C - 220 °C
The RT25 all stainless steel disc check valves have a compact design and were specially designed for use with steam and hot condensate.
DN: 0.5 in - 4 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 200 °C
The SRT10 all stainless steel disc check valve has a compact design and is specially designed for use with clean steam, hot condensate and other process fluid applications. They are particularly recommended ...
DN: 40 mm - 900 mm
Pressure: 10 bar - 160 bar
Bolted Bonnet or Pressure Seal Bonnet Coating: Standard Paint Coating Design Prohibits Galling or Scoring of Seating Surfaces Large-sizes Are Provided With Lifting Rings for Easy Hoisting One-Piece Disc Construction ...
wenzhou domos fluid equipment co.,ltd
DN: 2 in - 32 in
Type: Pressure seal swing check valve Pressure: Class 600LB ~2500LB Connect End: RF, RTJ, BW, Material: Cast steel, Alloy Steel. Low Temperature Steel, Stainless Steel. Duplex Steel. Etc. Application ...
wenzhou domos fluid equipment co.,ltd
DN: 2 in - 24 in
Pressure: Class 150LB ~ 2500LB Connect end: RF, RTJ, BW. Material: Cast steel, Alloy steel. Low temperature steel. Stainless steel. Duplex steel. etc. Application Standard: Design: ASME B16.34 Face-to-face: ASME B16.10 Flanged ...
wenzhou domos fluid equipment co.,ltd
... some leakage. This leakage can be avoided with the implementation of the Herzog valve, which is constructed and works on the principle of a non-return valve. These valves can be built ...
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C
A check valve, or non return valve, is a valve that prevents the fluid from flowing backwards and ensures that it flows in only one direction. It can be used to prevent ...
DN: 0.25 in - 3 in
Pressure: 12 bar - 40 bar
Temperature: -10 °C - 180 °C
... pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as ...
RIEGLER & Co.KG
DN: 15 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: -4 °C - 200 °C
Fully lined Ball Check Valves for safe non-return flow control of corrosive process media. Typical installations are in front of pumps, as overflow protection for liquids and in venting applications. Main ...
DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C
SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit
MHA ZENTGRAF GmbH & Co. KG
DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C
Available sizes: DN6 - DN40 (1/8" to 1 1/2") Panel mounting kit
MHA ZENTGRAF GmbH & Co. KG
DN: 8, 6, 12, 10 mm
Pressure: 350, 500 bar
Temperature: -20 °C - 100 °C
ANSI B1.20.1 NPT Female thread SAE J 514 / ISO / DIS11926-1 Female thread
MHA ZENTGRAF GmbH & Co. KG
DN: 15 mm - 300 mm
Pressure: 16, 40 bar
Temperature: -10 °C - 300 °C
Material: Brass, stainless steel Working position: Any Features •compact settlement •environment-friendly •no maintanance tests acc. to EN 12266-1 class D • face-to-face dimension according to EN 558 series 49 (DN15 - DN100)
ZETKAMA Sp. z o.o.
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
Material: Grey cast iron Working position: Any Features •closing thightness (class D acc. to EN -12266-1) •compact settlement •environment-friendly •no maintenance
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
Material: Grey cast iron, nodular cast iron, bronze, cast steel Working position: Any Features •closing tightness according to EN 12334 •compact settlement •environment-friendly •no maintenance •face-to-face dimension according ...
ZETKAMA Sp. z o.o.
Temperature: 0 °F - 250 °F
... Series Silent Wafer Check Valve has a spring-loaded poppet that allows the valve to close before flow reversal occurs, resulting in a silent, non-slam closure. It is a truly silent check ...
CLA-VAL Automatic Control Valves
Pressure: 0 psi - 400 psi
Temperature: -40 °F - 140 °F
... the pilot control. The integrated check feature protects upstream equipment like pumps by admitting downstream pressure into the main valve cover chamber, closing the main valve upon ...
CLA-VAL Automatic Control Valves
... effluent. The flexible sleeve provides maximum flow with a minimum pressure drop across the valve at all times. The “duckbill” concept check valve has been in use for more than 100 ...
CLA-VAL Automatic Control Valves
Overview CRANE® bronze body swing check valves in Y pattern design come with threaded and soldered end connections and are available in ASME pressure classes 125, 150, 200 and 300.
Crane Process Flow Technologies GmbH
DN: 300 mm - 1,500 mm
Pressure: 0 bar - 434 bar
... aspect of a check valve in a piping system is to protect equipment and prevent damage caused by backflow. Engineers today are very aware of the valve characteristics they need for ...
Crane Process Flow Technologies GmbH
Temperature: 0 °C - 130 °C
... With floating ball As start-up verdilation valve Ball made of other materials Flanges acc. to other standards DESIGN FEATURES With floating ball As start-up verdilation valve ...
Crane Process Flow Technologies GmbH
Pressure: 160 bar - 400 bar
Temperature: 200 °C
high pressure non return valve, both sides female thread, opening pressure 0,5 bar - 1,0 bar, material: 1.4571
... completes its product range by the full range of ball valves and non-return valves employed where fluid flows in one direction and has to be kept under pressure. Our non-return valves ...
Pressure: 350 bar
PG planetary gear units are divided into 21 basic groups depending on the different torques that are to be transmitted to the output shaft, which can vary from 0.05 to 65 kNm. In fact, the product modular construction permits the coupling ...
DN: 12 mm
Pressure: 350 bar
SKU:M530 204 012 000 Dimension: [mm]55 x 120 x 30 Connection port(s):DN12 Design type:Cone seat valve Name:Shuttle valve DN12 Operating pressure: [bar]350 Mounting position:Any Materials:All parts are ...
DN: 10 mm
Pressure: 350 bar
Spring loaded shuttle valve Connecting port: DN10 The spring positions the cone in a defined Position
Pressure: 320 bar
Flow rate: 60 l/min
... description - Cetop 03 Non-return valve SMC SATURN - Specifications - Check valve with spring - Benefits - Locking function - Technical information - Minimum purity of the ...
Kramp
DN: 100 mm - 1,500 mm
Pressure: 10 bar - 100 bar
Non-return Valves Non-return axial valves : one-way valves allowing the fluid to flow in only one direction and preventing the backflow. Main features ■ optimization of the aerodynamic ...
To avoid the backflow of materials up to category 4 into the drinking water installation, the backflow preventer BA (acc. to DIN EN 1717 a “backflow preventer with a controllable middle pression area”) is used as an approved safety device.
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
Brass swing check valve Novo • - Brass swing check valve, with brass seat, screwed ends • - Used for water • - BS 21 / ISO 228-1-2000 threads standard • - Max ...
Viet - Tiep Joint Stock Company
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 100 °C
Brass spring check valve Novo • - Brass spring check valve, screwed ends • - Used for water • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • ...
Viet - Tiep Joint Stock Company
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
Brass foot valve Novo • - Brass foot valve, screwed ends • - Used for water, petroleum • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • - Max working ...
Viet - Tiep Joint Stock Company
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 90 °C
Pressure fluctuations in a water distribution circuit can cause a reversal of the flow direction. In this case a check valves, installed between the water distribution system and the mains water supply, ...
DN: 4 mm - 12 mm
Pressure: 0 bar - 10 bar
Temperature: 32 °F - 316 °F
Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other.Fitted upstream of the circuit to be protected, they provide total protection. Non-return valves ...
Parker Fluid System Connectors Division Europe
DN: 1.813 in - 7.063 in
Pressure: 3,000 psi - 20,000 psi
Temperature: 121 °C
Cameron designs and manufactures various types of API Spec 6A valves suitable for the demanding environments of onshore and offshore drilling and production, including large-bore completions pressure and temperature ...
DN: 20 mm - 150 mm
Pressure: 27.6 bar
Temperature: -30 °C
... feature makes these valves ideal for systems that use a VFD or compressor unloading feature to reduce capacity as they can tolerate load fluctuations better than alternative check valve ...
Parker Refrigerating Specialties Division
Pressure: 420 bar
Temperature: -37 °C - 204 °C
Flow rate: 1.6 l/min - 500 l/min
... psi), Parker’s poppet and ball style check valves have a simple and robust design which are used to block flow in one direction, and allow flow in the opposite. Parker’s robust poppet and ball style ...
Please specify:
Help us improve:
remaining