{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 5.5 mm
Pressure: 0 bar - 280 bar
Temperature: -40 °C - 149 °C
... as well as in both forward and reverse configurations. Screened models are also available. IMH Restrictor Check Valves are, functionally, an orifice in series with a check valve, ...
DN: 5.5 mm
Pressure: 0 bar - 280 bar
Temperature: -40 °C - 149 °C
... purchased in a variety of Lohm rates. IMH Press-in Restrictor Check Valves are, functionally, an orifice in series with a check valve, all in one 5.5mm diameter, cartridge-style package. ...
DN: 65 mm - 600 mm
Pressure: 110 bar - 760 bar
... The Edward Tilting Disk Check Valve is a large bore valve designed to close as quickly as possible, minimizing loud, damaging slamming and vibration noises caused by high-velocity reverse flow in high-pressure ...
DN: 100 mm - 100 mm
Pressure: 20.7 bar - 20.7 bar
... Overview
This compact 4-inch swing
check
valve CV-300B provides reliable one-way
water flow control for fire sprinkler systems. Designed to allow flow in the forward direction and prevent backflow, ...
DN: 40 mm - 500 mm
Pressure: 40 bar
Temperature: 80 °C
... Applications
- Check valve for pumping and booster stations
- Prevention of backflow and reduction of surge in uphill and vertical pipelines
- One-way flow assurance in waterworks and industrial
BERMAD CS Ltd
... suction hose Corrosion-resistant materials throughout Xylem’s Jabsco In-Line Non-Return Valves fit in a pump’s suction hose to aid priming and prevent backflow of water into the bilges. ...
Pressure: 300 psi
Temperature: 32 °F - 230 °F
... Pilot-operated check valves work as standard check valves but can be opened with an air pilot signal to permit free flow in the normally "checked" direction. This provides the user with ...
Clippard
DN: 0.25 in
Pressure: 0 psi - 150 psi
Temperature: 32 °F - 230 °F
... -N seals. This device is suitable for use with air, oil and water, and is fitted with an electroless nickel-plated brass needle and stem. JFC-4K devices are combination needle and check valve flow controls, ...
Clippard
DN: 0.375 in
Pressure: 150 psi
Temperature: 32 °F - 230 °F
... needle and check valve flow control that enables you to control the air flow from air cylinders thus controlling the piston strokes speed, while extending or retracting, depending on their circuit location. The J-Series ...
Clippard
DN: 40 mm - 300 mm
Pressure: 6 bar
Temperature: 0 °C - 60 °C
... Wafer check valve in PVC-U/EPDM. The CR wafer check valve is designed to be installed directly between stubs and flanges in accordance with ISO/DIN standards. Technical features ...
FIP - Formatura Iniezione Polimeri
DN: 32 mm - 400 mm
Pressure: 8, 10, 5 bar
... The FR type swing check valve is designed to be directly installed between stubs and flanges according to ISO/DIN or ANSI 150 standards. ...
FIP - Formatura Iniezione Polimeri
DN: 32 mm - 400 mm
Pressure: 10, 8, 6, 5 bar
... The FR type swing check valve is designed to be directly installed between stubs and flanges according to ISO/DIN or ANSI 150 standards. ...
FIP - Formatura Iniezione Polimeri
DN: 0.88 mm - 1.01 mm
Pressure: 0 psi - 250 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve is required ...
DN: 0.88 mm - 3.2 mm
Pressure: 0 psi - 250 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve is required ...
DN: 75 mm - 200 mm
Pressure: -10 bar - 7,000 bar
... name
Flap
valve FV10 (UPVC)
Short description
Flap
valve designed for
wastewater and industrial piping systems, available in multiple nominal diameters.
Key information
- Type:
DN: 15 mm - 100 mm
Pressure: 16 bar
... UPVC
check
valves for pressure piping systems.
Check
valve female with female threaded sockets.
Product details
- Brand: U-PVC Check Valves
- Category:
DN: 2 in - 12 in
Pressure: 350 psi
Temperature: 0 °C - 80 °C
... Model HCV-350GG, theUL Listed Groove Swing Check Valve, allows and easy and faster installation, this valve is commonly used in water pumping in Fire Systems. T he main function the ...
DN: 25 mm - 300 mm
Temperature: -20 °C - 100 °C
... Main applications ■ - Drinking water ■ - Shipbuilding ■ - Water transport ■ - Coolant ■ - Irrigation systems ■ - Chemical industry ■ - Power plants ■ - Sea water desalination ■ - Water ...
DN: 50 mm - 500 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 80 °C
... straightforward removal of the cover. Applications and Benefits of Threaded Ball Check Valves Wastewater discharge, purification, sanitation, and pumping. Water, drinking ...
DN: 50 mm - 500 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C
... straightforward removal of the cover. Industrial Applications of the Ball Check Valve Wastewater discharge, purification, sanitation, and pumping. Water, drinking water, ...
DN: 100 mm - 1,800 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 90 °C
... left to the right. Upon request, it is possible to provide this check valve with a protection cover for more safety Main Characteristics and Advantages of the Weighted Check Valve ...
DN: 1 in - 16 in
Pressure: 1 bar - 10 bar
... Altitude Control Valve, Rate of Flow Control Valve, Surge Anticipating valve, Solenoid Control Valve, Check Valve ...
DN: 0.02, 1 dm
Pressure: 1.5 bar
Temperature: -20 °C - 60 °C
... The angle check anti-siphon valve is an essential safety accessory designed to prevent the siphoning of liquids from an aboveground tank. Constructed from stainless steel, this valve ...
DN: 2 in
Temperature: -20 °C - 60 °C
... The STAINLESS STEEL ANGLE CHECK VALVE RIDART is designed to prevent the drainage of fuel (loss of prime) in the suction line and permits the product flowing only towards a dispenser. The valve is normally ...
DN: 10 mm - 100 mm
Pressure: 0.2 bar
... industrial facilities • Water treatment • Galvanotécnica Use • To regulate a prescribed passing direction – reflux inhibitor Fluids • Neutral media free from solids and aggressive liquid or gaseous media if ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 0 l/min - 20 l/min
... The PKV-06 valve, made of stainless steel W.St.1.4301, allows unrestricted flow from V to C ports and blocks flows in the opposite direction until pressure is applied on the pilot port. PKV-06 is used as a static load holder. ...
DN: 0.5 in
Pressure: 200 bar
... Application PKV-30 is used as a static load holder. Specifications The PKV-30 valve, made of stainless steel W.St.1.4301, allows unrestricted flow from V to C ports and blocks flows in the opposite direction until pressure is applied ...
Pressure: 3 bar - 230 bar
Temperature: -30 °C - 80 °C
Flow rate: 14, 380 l/min
... The valve is made of high-quality stainless steel and has a metallic seal. Available in different thread designs. ...
Pressure: 4.2 bar - 350 bar
Temperature: -40 °C - 220 °C
Flow rate: 1 l/min - 90 l/min
... Soft sealed non return valve as screw-in valve G1/8 from stainless steel ...
Pressure: 0.2 bar - 230 bar
Temperature: -40 °C - 230 °C
... Soft-seated non-return valve with low opening pressure and large nominal size. ...
DN: 0.5 in - 1.5 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 95 °C
... shut-off in closed-circuit piping systems with gravitational circulation in the warm water distribution circuit. - distribution of drinking- and process water ...
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 90 °C
... Pressure fluctuations in a water distribution circuit can cause a reversal of the flow direction. In this case a check valves, installed between the water distribution system and the ...
DN: 0.5 in - 2 in
Pressure: 150 psi
Temperature: 0 °F - 280 °F
... The Chemtrol® True Union ball check valve stops the flow of media in one direction while allowing flow in the opposite direction, with minimum turbulence and chatter while maintaining pump prime. The valves ...
NIBCO
DN: 0.5 in - 4 in
Pressure: 145 psi
Temperature: -20 °C - 100 °C
... Clamp, Spring Return Dimensions to ISO2852, DIN32676 ...
Taloar
DN: 15 mm - 150 mm
Pressure: 1 bar - 6 bar
Temperature: 0 °C - 150 °C
... types of valves are designed to allow the liquid to flow in one direction only, preventing reverse flow and assuring process integrity. They are designed for guaranteeing the highest level of hygiene both internally and ...
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... Check valves, Check valves streamlined flow type, Check valves streamlined flow type on carbon steel PN 40 - ANSI 150 (1.0619) Streamlined flow check ...
Mival
DN: 50 mm - 800 mm
Pressure: 10, 16 bar
... Straight-seat check valve with internal shaft and optional lever and weight. Highly cost-efficient due to high opening degree. Available with stainless-steel wire guard and limit signal for the open position as options. ...
VAG-Group
DN: 15 mm - 50 mm
... Spring loaded, globe style lift check valve ASME Class 800 may be installed in horizontal and vertical piping applications. 5540 series lift check valves are designed for ASME boiler ...
Pentair Valves & Controls
DN: 15 mm - 80 mm
Pressure: 10, 16 bar
Temperature: 10 °C - 60 °C
... • Completely made in plastic - corrosion free. • 100% factory tested. • Excellent flow rate. • Easy installation and maintenance. • May be used either vertically and horizontally. • Available in PVC-U and Corzan® PVC-C. • Resistance to many inorganic ...
Cepex SER
DN: 50 mm - 400 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 100 °C
... housing, water distributions, protection of drinking water networks A double check valve composed of 2 standard range single non return valve type ...
SOCLA
DN: 40 mm - 100 mm
Pressure: 1 MPa
Temperature: 425 °C
... Wear-resistant Check Valve is to prevent medium backflow in pipeline. Medium is allowed to flow in only one direction. Under the medium pressure of one direction flow, the spring force acting on the valve ...
DN: 50 mm - 300 mm
Pressure: 50 bar
Temperature: -29 °C - 425 °C
... Body material Steel A216WCB Stem material Stainless steel A182 F6 Connection Flanged RF ANSI 150 / ISO PN20 Seat Stellited steel A105 Working pressure 150 Lbs ...
TECOFI
DN: 50, 32, 40 mm
Pressure: 16 bar
Temperature: -10 °C - 250 °C
... These brass check valves come in spring types can be used in all positions in respect to the direction of flow. They have metal tightness and stainless steel discs for maximum protection. They are beneficial in watering, ...
SFERACO
DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 150 °C
... Di Nicola manufactures Swing check valves in carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content alloys for conditions of extreme corrosion from over fifty years with dimensions between ...
DI NICOLA INFINAM
DN: 0.375 in - 2 in
Pressure: 0.1 bar
Temperature: -25 °C - 180 °C
... INFORMATION1. Spring check valve2. Made by AISI 316 (CF8M)3. Seat PTFE4. Thread ends EN 10226-1 (EX ISO 7-1 e DIN 2999)5. Max working pressure 16Kg/cm26. Working temperarure -25C° / + 180 C°7. Minimum opening pressure ...
DN: 50 mm - 200 mm
Pressure: 10, 16 bar
Flow rate: 60 m³/h - 1,103 m³/h
... Check valves protect the pipelines and plants against flow medium back-streaming The flap opens automatically in the flow according to the arrow on the valve housing Body length according ...
Hawle
DN: 2 in - 36 in
Temperature: -54 °C - 350 °C
... carrier and pin eliminates the phenomenon of valve sticking so that it can close and open. - Low-noise type. - Widely used in the pipeline system with high flow requirements to prevent the harm of liquid flow back. - ...
Athena Engineering S.r.l.
DN: 50 mm - 400 mm
Pressure: 16, 25, 40, 64, 100 bar
Temperature: -20 °C - 200 °C
... Flapcon® CV10 Series spring double check valve design is manufactured to withstand high operating pressures. The discs are opened 85 ° to provide positive closing. Sealing materials can be changed for different temperature ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
DN: 0.5, 0.75, 1 in
Pressure: 10 bar
Temperature: 0 °C - 85 °C
... Connectivity standard Internal thread GAS cylindrical ISO 228/1. Max working temperature 85°C Colors White (RAL 9003) ...
Bucchi S.r.l.
DN: 50 mm - 600 mm
Pressure: 0 psi - 175 psi
... Design Features:Rubber Flapper Swing Check Valves feature a unique, simple design with only one moving part. The flapper does not swing from a hinge pin; it simply flexes open. The seat is on a 45° angle. The flapper ...
DN: 50 mm - 300 mm
Pressure: 10 bar - 16 bar
... the lever and weight to protect against unintentional contact Also for potable water Product Description The SWING check valve is a non-return valve that can be flexibly used for ...
DN: 300 mm
Pressure: 0 Pa - 1,600,000 Pa
Temperature: -10 °C - 80 °C
... ART. 170 Cast iron (GJL 250) PN 16 horizontal swing check valve brass-rubber trim. Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning ...
MARAN E PERACINI
DN: 0.25 in
Pressure: 4.3 psi - 435.1 psi
Temperature: 0 °C - 70 °C
... Operating features Cv = 0.68 Working temperature = 0°C+70°C Working pressure = 30 bars max 4.3 psi ...
the best suppliers