|
|
Intelligence and high power density in a tiny space
maxon's compact drives feature controllers, sensors and motors in a modern aluminium casing, which, when combined with existing compatible maxon products, produce robust, space-saving and high power density drive solutions. The new MCD EPOS is a highly dynamic, maintenance-free positioning drive with a fieldbus connection and a maximum 60 watt output.
maxon's compact drives are ideal, in that they take up very little space yet provide excellent functionality. They are also extremely flexible and can be used, for example, in automation, robotics or even for laboratory applications. The MCD EPOS combines a brushless maxon EC motor, a digital encoder MR and a fully digital EPOS positioning controller. Cost-savings have been made thanks to the careful optimisation of components, creating an unrivalled and competitively priced drive that works out slightly cheaper than the price of the individual parts.
|
|
Series M21R 80T to 132T
M21R 132 to 180 VS
Output range 0.55 to 7.5 kW (M21... T)
7.5 to 22 kW (M21... VS)
Frequency setting range 0 to 132 Hz (M21... T)
0 to 100 Hz (M21... VS)
Features Modular design, VS: vector-controlled,
sensorless, superior operating standard, DC link reactors, PID controller, temperature monitoring, simple start-up, degree of protection IP 54/55 and higher, class F insulation, energy-efficient and environment-friendly, series are compliant with standards EN 61800-3, VDE 0160, EN 50081, EN 50082
|
|
|
Compact drives consist of flywheel, planetary gear and clutch brake combination (pneumatically/hydraulically) and by our experienced engineers with the specific requirements of your press are co-ordinated. Address us.
|
|
... see all the products in the category
Clutches
|
|
IclA intelligent compact drives consist of a motor and control electronics. The drives are controlled via a fieldbus or a pulse interface. IclA are used as decentralised drives in machine and automation applications. In connection with a motion controller or a PLC, complex automation tasks can be performed in a simple and cost-effective way. Complete function modules are available for easy motion programming with a Schneider Electric motion controller.
|
|
SERVO-MOTOR FHA-MINI
hollow shaft Mini-servo-motor associating an engine brushless, a coder and a reducer without play HARMONIC DRIVE.
Mini servo-motor cubes with hollow shaft.
There exists in 3 sizes: a cube of 50,60 or 75mm on side.
Benefit produced:
* Most compact of the market: 4,8Nm in a cube of 50mm of with dimensions!
* High dynamics with its engine brushless
* Utmost precision with the reducer with null play HARMONIC DRIVE.
Characteristics produced:
* Vmax up to 200 tr/min,
* Cmax until 28Nm,
* Mini hollow shaft of 6,2 with 13,5mm,
* A cube of 50,60 or 75mm on side,
* Report/ratio of reduction: 30,50 or 100,
* 2 tensions of winding to the choice for a maximum adaptability,
* Hollow shaft, high integration, facility of startup,
Sectors of use:
* Robotics,
* Machine tools,
* Special machines,
* Embarked solutions.
|
|
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact AC drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Thanks to an extremely effective design, everything is included as standard. The units can be installed on the wall without additional cabinets because of high protection classes. The RFI filters and brake choppers are always integrated. The standard units fit almost everywhere in both industrial and residential areas. The integrated AC choke is the most effective way to protect the drive against the overvoltage spikes and to reduce the stress on supply transformers, cables and fuses.
More features, more performance
No additional cabinets required
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
Easy to install, easy to use
Low noise (both drive and motor)
Large amount of control possibilities (via I/Os, field buses or display panel)
Large amount of features (e.g. fully programmable I/O, autoidentification, PID controller, flying start)
High performance
Convenient installation and programming
The installation and programming is extremely quick and convenient with the help of the credit-card-size Quick Guide. The programming is often just a selection of load type and fine-tuning of the motor nominal current and speed.
|
|
AF-300 Mini Micro Drive
230V : 1/8 - 5Hp, 460V : 1/2 - 5Hp. The AF-300 Mini Drive is a compact, but powerful and easy to use AC variable frequency drive.
AF-300 C11 Mini-Micro Drive
230V : 1/8 - 5Hp. The AF-300 C11™ drive is designed for use in small machines such as fans and conveyors, as well as other machines in which motor speeds can vary.
VAT 20 Mini-Micro Drive
230V: 1/4 - 3HP; 460V: 1 - 3HP. The VAT 20™ drive is designed for use in small machines such as fans and conveyors, as well as other machines in which motor speeds can vary. The VAT 20 series is available in ten models, from 1/4 to 3 hp.
AF-300 M$11 Micro Drive
230V: 1/4 - 5HP; 460V: 1/2 - 5HP. Torque vector control, automatic tuning, auto-restart after momentary power failure, and extensive diagnostics are just a few of the seventy-nine standard features available in the AF-300 M$ II™ .
|
|
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact AC drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Thanks to an extremely effective design, everything is included as standard. The units can be installed on the wall without additional cabinets because of high protection classes. The RFI filters and brake choppers are always integrated. The standard units fit almost everywhere in both industrial and residential areas. The integrated AC choke is the most effective way to protect the drive against the overvoltage spikes and to reduce the stress on supply transformers, cables and fuses.
More features, more performance
No additional cabinets required
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
Easy to install, easy to use
Low noise (both drive and motor)
Large amount of control possibilities (via I/Os, field buses or display panel)
Large amount of features (e.g. fully programmable I/O, autoidentification, PID controller, flying start)
High performance
|
|
AF-300 C11 Mini-Micro Drive
The AF-300 C11™ drive is designed for use in small machines such as fans and conveyors, as well as other machines in which motor speeds can vary. The AF-300 C11 series is available in thirteen models, from 1/8 to 5 hp, allowing you to select the model that best suits your application.
Features and Benefits:
Built-in terminal block
Requires only power and motor connections for use
Easy-to-use keypad panel
Program drive and set output frequency
9Quick response time
Reliable operation against load fluctuation
elf-diagnostics
Shut-off protection and fault failure messages
Standard frequency setting POT
Allows quick adjustments
Applications:
Fans
Conveyors
|
|
Drive Technology - Rexroth IndraDrive Power Units
Rexroth IndraDrive C Converters
* Power Range from 1.5 to 75 kW with Maximum Currents from 11 to 210 A
* Compact Construction for Single-Axis Solutions
* Direct Mains Connection up to 500V
* High Overload Tolerance
* Internal Control Voltage Supply (sometimes optional)
|
|
Delta Drive Micro from MOTRON is a miniature plug and play LOW COST frequency converter, intended for variable speed regulation of fans etc up o
370W max with a 2-10V input range and apr. 5-50Hz output range with linear
V/F control. 0V on control line will stop the motor. Delta Drive Micro is an extremely robust product in a Die Cast Aluminium Box which can be placed almost anywhere. It is simple to use, and yet very efficient in control. The electronics has been sealed with resin for maximum robustness and user connections are avaliable throgh terminals inside the cabinet.
Delta Drive Micro will connect to 230VAC powersupply, a standard 230V AC motor and a simple 2-10V isolated control signal will command the motor to run at specified speed. Typical 5kOhm input impedance !!
Delta Drive Micro has an input detector, which will STOP the motor, if the inputsignal is less than apr. 1V=, so no need for an extra start/stop signal, its all been taken care off.
Delta Drive Micro has a number of build in safety funtions, which all will stop the motor, and retry after apr. 30 seconds. Overtemperature, motor shorts, overvoltage, undervoltage, ground failures etc will be detected and stop the motor.
Delta Drive Micro comes in different versions. Mainly, a Wall Mount version with integrated bottom flanges for mounting. Also, a Flange Version is supplied for mounting directly in some kind of Air Convection systems. This type needs to be cooled by forced air , as in Chimneys etc.
Delta Drive Micro is designed with an integrated EMC filter to comply with International regulations. Isolation between control input and live supply is designed to withstand min 3kV, according to the LVD directive. CE Pending
Delta Drive Micro is as standard supplied with glands and snap in terminals for connections, but an alternative is a Complete Delta Drive with integrated Cables as per Customer requirements. Cable and Drive..
|
|
|
... see all the products in the category
AC drives
|
- Smallest Linear Slide with High-Speed Linear Motor Drive
- 20 mm Travel Range
- Velocity to 500 mm/s
- Acceleration to 20 g
- Resolution to 50 nm
- Self-Locking
- XY-Combinations Available
- 20,000 h MTBF
- Vacuum Versions to 10-7 hPa
PILine® - Ultimate Motion in the Smallest Package:
PILine® M-661- and M-662-series piezo motor linear slides are the smallest high-speed piezo-motor-driven translation stages currently available on the market.
Working Principle:
M-661 and M-662 linear stages have a new, patented, ultrasonic drive developed by PI. The highly compact, integrated P-661 piezomotor drive can provide accelerations of up to 20 g and velocities of 500 mm/s and more, together with high resolution and holding force. Because the ceramic stator is pressed against a slider of the stage, piezomotors resist motion with an intrinsic holding force when the stage is at rest. The result is very high position stability without the heat dissipation common with conventional linear motors. Furthermore, there are no gears, leadscrews or other mechanical components to contribute play or backlash.
|
|
SIMATIC Microbox PC 427B – ultra-compact, flexible and maintenance-free
The SIMATIC Microbox PC 427B is equipped with powerful, energy-saving Intel Celeron M and Pentium M processors up to 1.4 gigahertz and offers more than double the computing power of the predecessor model. Thanks to its rugged PC technology, it is suitable for use in the machine.
The absence of moving parts (fans) and the application of CompactFlash ensures maintenance-free continuous operation - up to an ambient temperature of +55 °C and with high system availability. High adaptability and flexibility for measuring and control tasks are provided by the 4 USB and 2 Gigabit Ethernet interfaces as well as the optional PROFIBUS connection. Expansions can be carried out using up to 3 PCI-104 slots.
|
|
With ECODRIVE Cs, Rexroth proposes a generation of servos AC in the beach of low power from 100 to 750 W.
The compact variators are satisfied d’ a mono and three-phase network with a tension d’ entry being able to reach 230V.
Teams of modules of communication to interface SERCOS, Profibus DP, DeviceNet or analogical and parallel interface, they are ideally adapted to l’ use in systems with multiple axes with interconnection and can be also used in so much qu’ intelligent single axis connected by bus of standardized ground. The software of startup intuitive on basis Windows, DriveTop, allows l’ user to parameterize the apparatuses easily. L’ interface SERCOS allows moreover l’ use without problem in the control devices SYNAX, VISUALMOTION, IndraMotion MTX and in the ordering of robot RHO 4.
|
|
| ... products without technical information |
| |
This universal compact and sturdy gear motor is based on a modular system featuring high output torque and a monoblock housing with integral motor adapter. A large number of variants are available for each size. The opportunity to mount brake motors makes the bevel helical gearmotor most suited for traverse movements in cranes or other large mobile applications.
Main features:
• Horizontal or upright fitting position
• Torque reaction arm integrated in the casing
• 6 frame sizes rated according to a modular system
• Price-advantages through series manufacturing.
Technical Data:
Torque (T2 nominal): 3,000 up to 25,000 Nm
Transmission Ratio: 18 up to 112 iN
Power Rating: up to 173 kW
|
|
| ... products without technical information |
| |
Mini reducer under casing CSF
A component last generation (standard HFUC) associated with a powerful bearing of exit (at 4 contact points). From 20 with 48mm for a couple max from 1,4 to 28 Nm.
Benefit produced:
* Reducer with null play. It is particularly compact with a bearing of exit at 4 contact points and a strong integration of the reducer in the casing
* Particularly compact with a bearing of exit at 4 contact points and a strong integration of the reducer in the casing.
Characteristics produced:
* C max from 1,4 to 28 Nm
* Report/ratio of reduction from 30 to 100
* Diameter X length of 20x17 with 51x45
* Very high compactness (component last generation) and bearing of exit at 4 contact points.
* 3 versions: - adaptation engine in entry and flask of exit (2XH-F),
- adaptation engine in entry and output shaft (2XH-J),
- tree of entry and output shaft (1U)
Sectors of use:
* Robotics,
* Special machines,
* Semiconductors,
* Machines of assembly.
|
|
|
|
