|
|
-Hinged latch cover
1. Stainless steel hinge&latch type keeps water proof rating even though opening the cover frequently.
2. Changeable hinge&latch size or addable hinges&latches according to box size in order to keep more strong water proof rating
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 81 kinds sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Optional for modifying all latches instead of hinges
7. Available stainless steel wall mounting bracket
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
COMMAND BOXES – INDUSTRIAL CONTAINERS
To choose an appropriate container is a crucial phase in the development of a project. It is necessary to proceed with systematic investigation, methodical assessment and application variables: where are we going to install our equipment? In what environmental conditions? What level of protection must we have? How much space is available? How should it be arranged? By working out this information we can define the most suitable product and meet the demands of the project. New Elfin produces a vast range of containers:
- aluminium: 70x118 up to 400x400
- stainless steel: 82x82 up to 230x26
- thermoplastic: 50x52 up to 254x361
- polyester: 250x300 up to 500x600
|
|
A completely new housing concept facilitates the simple connection of up to 19 special cage-tension spring clamps from Wago and can be directly snapped onto the housing. To bonding to the board on the housing cover accepts the associated power strip.
Advantages of the new concept:
- Freeley accessible, large wiring space
- Plug-in cable entries
- Modern, screwless clamping technology
- Rapid exchange of the automatic control engineering without dismantling the electrical connections and the housing underpart.
|
|
Often overlooked until the last minute, the terminal box plays an important part of most projects.
Although a price sensitive product, the terminal box is traditionally used in large quantities and needed in a hurry. After reviewing our current range of terminal boxes, we have decided to reduce the number of sizes and options available, and concentrate of a number of core sizes. Our intention is to invest in more inventory, albeit in fewer sizes, so we can offer more product from stock more of the time.
|
|
From simple emergency stop switches to complete industrial PC's or CNC units - such complex modules need to be adapted to the rough conditions prevalent in industrial environments.
ROSE operating, display and mobile control enclosures provide reliable protection to the built-in electronics while offering a high degree of user comfort.
Depending on the area of application the enclosure systems can be adapted individually to provide higher protection degrees.
|
|
|
|
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
The CC-4000 SL is a perfect addition to the existing Bernstein
control housing range CC-4000 thanks to its elegant, slim-line
profile.
This high quality dynamic housing will enhance the appearance
of any modern machine or system. Available with either 55 or
99mm external depths, the system profile can be tailored to
match the exact size of the control unit (HMI, IPC etc.).
Controllers can be mounted easily, economically and securely
thanks to the many excellent technical properties of CC-4000 SL.
|
|
|
|
|
|
Modular design
The Bernstein light control housing CC-3000 is especially suitable for
mounting display components or control elements, (HMI's, IPC's etc). Its
height and width are variable up to a maximum recommended size of
approx. 600 x 600 mm. Various combinations of the 55, 120 and 200 mm
wide aluminium profiles give the housing several depth possibilities.
Customer-specific housing
The light control housings CC-3000 are supplied from the factory as standard housings or as custom-built versions. The modular concept is superbly suited for customer-specific solutions. The aluminium profiles are simply cut to length and assembled with the corner modules to create various sizes. The basic housing profile sizes can be combined with each other to achieve the required housing depth.
Besides the dimensions, many other housing properties are selectable in customer-specific configuration, e.g.: the hinged side of the door
the housing configuration for suspension systems the colour of the corner modules.
The front panel is also available ready for use: machined to customer's specifications, screen printed or engraved. A checklist helps to define the required housing configuration and at the same time serves
as an enquiry and order form.
|
|
|
|
|
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request.
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
Switch and control systems
- Electric switch and control systems
- Marshalling and distribution panels
- Electrical switch panels in accordance with national and international standards
- Special cabinets (steel, stainless steel, aluminum) for instrumentation, control and electro-technics and for use in hazardous areas
BARTEC BENKE designs and manufactures control system solutions for automation of machines and processes.
|
|
The one-piece desk is used in simpler applications but still offers an up-to-date technical specification.
These styles have bottom entry gland plates with an adjustable, removable section and an adjustable mounting plate.
Accessories are common to the three styles. The shelf lid of LE-ME and SBA are supplied with gas springs.
The design concept of the PE console allows the installation of racks or monitors and a supplementary casing can be fitted up to the back to increase the usable depth to 500mm.
The cabinet desks are manufactured from pressbent and welded 1.5mm and 2mm sheet steel.
The ZBA control desk range has been manufactured in parallel to the SBA range to meet simpler applications.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
|
Stainless steel enclosures are suitable for many environments, such as the chemical, food, pharmaceutical and oil industries. Being one of the fi rst on the market with stainless steel enclosures. Eldon have a long history and experience with this kind of product.
|
|
|
GE's multipurpose enclosure range for indoor and outdoor applications has the answer when you're in need for permanent and safe protection of electrical and electronic equipment.
|
|
The modular aluminium enclosure CC-4000 from Bernstein is a high value housing for industrial controllers and automation components in protection degree IP 65. Alu-minium profiles in different depths are easily assembled for their own or in combina-tion to create the desired housing dimensions in width and height. For better func-tionality a swivelling front door or rear cover provide direct access to internal circuits. The Bernstein suspension systems and base brackets guarantee the best integration of the housing at the customer's machine or plant. High functional accessories re-plenish the program to a high standard automation system.
|
|
Water-tight wall mounted enclosures IP 66 protection
Description
In steel ACM
Epoxy-polyester textured finish (RAL7032).
Automatic locking systems.
Reversible door.
Top or bottom cable gland plate.
In stainless steel ACM.X
Made in stainless steel (type AISI304).
Brushed stainless steel finish.
Enclosure fully symmetrical.
Double bar locking system.
In polyester ACP
Made from glass reinforced polyester.
High resistance to UV.
Seamless Monobloc construction.
Top and bottom built-in canopy.
Locking system outside protected zone.
|
|
|
IMO's range of Enclosures manufactured in ABS offer IP66-67 protection and are pre drilled for base plate or din rail fixing.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
