The MAXp is a PCI bus-based motion controller with up to 8 axes of user-definable servo & stepper motion control. The MAXp is ...
The PCIx is a PCI 4 axis motion controller that conforms to the PCI Rev. 2.2 specification. The PCIx is a
four-axis controller for either servo or stepping motors. It supports 12 general purpose bits which are
opto-isolated for optimum noise immunity. The home and over travel inputs are opt-isolated. The architecture
of ...
The VX2 is a VME bus motion controllers with a step and direction output. Encoder feedback is available as an option on specific models. ...
Features
On-board 250 MHz DSP
Built-in PID with feed-forward gain closed-loop control algorithm - reducing the following error
Available with 3/6 encoders - providing up to 6 axes
3/6 axes of ±10 volts analog command for controlling servo
Maximum servo update rate is less than 50μs per axis
...
Features
Multi-axis continuous interpolation
2-axis circular interpolation
2 - 4 axes linear interpolation
Pulse output options: OUT/DIR, CW/CCW
...
Features
3 axes helical interpolation
Pulse output frequency up to 6.55 Mpps
Linear/Circular interpolation; T/S-curve speed profile
Hardware position compare
...
Corvus PCI
- stepper motor controller for up to 3 axes in PCI slot
- resolution 690,000 pos./revolution
- max. velocity up to 25 rev./s
- joystick mode
- closed loop interface
- ASCII command language glossary ...
Pollux-F
- resolution up to 600,000 pos./revolution
- step width down to ...
Hydra CM 2-axes motion controller
- motion control up to 2 axes
- extension up to 4 axes possible
- supports stepper motors, servo motors up to 500W and linear ...
ISD720 and ISD860 Intelligent Servo Drives
ISD720 and ISD860 are fully digital high-precision servo drives with embedded intelligence and a built-in power amplifier (720, or 860 W). Used to control brushless DC, brushless AC (vector control), DC brush and linear motors, these high-performance intelligent servo drives combine motion controller, power amplifier and PLC functionality in a single, ...
ISM4803 Intelligent Servo Module
ISM4803 is a high-performance intelligent servo module that combines motion controller, drive and PLC functionality in a single compact unit. The ISM4803 module is a flexible, cost-effective solution particularly adapted to the distributed and coordinated control of brushless, DC or step motors of powers up to 150 W, with voltages up to 48 V. Programmable with ...
ISCM4805 / ISCM8005 DIN Intelligent Servo Control Modules
ISCM4805 and ISCM8005 are high-performance intelligent servo modules combining motion controller, drive and PLC functionality in a single compact unit. The ISCM modules are flexible, cost-effective and compact solutions particularly adapted to the distributed and coordinated control of brushless, DC, linear or step motors of powers ...
MIC-3723 is a non-isolated multiple channel analog output card for the PCI bus, and each analog output channel is equipped with a ...
The PCA-5612 PCI graphics card is a market leader for a combination of value, performance and low power operation. The Z9s is one of the lowest power consuming GPUs ...
The AMAX-2750 Series consists of digital slave modules for AMONet. RS-485 that extend the digital I/O capacity. All the DIO slave extension modules are connected serially with a simple Cat.5 ...
ID code: IMD
Name: Integrated Motor Drive - SPIMD20
Description: designed in co-operation with STMicroelectronics
Category: Custom boards
Product specification:
Extremely compact dimensions: 163,5x60x26mm 0,5 kg
Current, speed and positionloop closed by the IMD
Up to 750 ...
Freescale Power PC P2020 based CPU
Product specification:
Freescale Power PC P2020 microprocessor (1.2GHz dual-core)
Removable SD card (450 Mbytes) for operating system and user's program storage.
...
Product specification:
* Microprocessor: Power PC Motorola MPC5200, 400MHz 760 MIPS
* Up to 32 interpolated axes, controlled through CANopen (DS402) or EtherCAT fieldbuses
* Memory:
o 60 Mbytes compact flash memory (expandable)
o 64 Mbyte DRAM;
...
You can also use the Epson PG Motion ...
Expansion board for connecting up to or installing in ...
PPCI series (PPCI7443), offer by Nippon Pulse, is an advanced PCI-bus format 4-axis motion control board that controls stepper motors or/and servomotors.
System Design
- The PPCI7443 incorporates ...
Nippon Pulse MCH series Motion Checkers are palm-sized controllers with a built-in integrated driver circuit for 2-phase stepper motors. The Motion Checker series is ideal for the prototyping phase and can substitute for a completely designed and integrated ...
Nippon Pulse's PCL/PCD series programmable pulse generators are motion control chips, which are designed to control stepper motors and servomotors, require less space, and ...
ORION Motion Controller Family
Note: The ORION family is fully supported and in production. For new applications, SMLC Motion Controllers are recommended.
ORION Motion Controller
The goal of ORION automation control is to offer an industrial PC-based platform for multi-axis motion control including servos, machine I/O, Human-Machine Interfaces (HMIs) and connectivity.
A fully-integrated ...
XD-Series Indexer Servo Drive
XD IndexerORMEC's XD-Series Indexing Servo Drives are anything but ordinary. Our Indexer development follows on our long-term track record of delivering high performance, networked, multi-axis integrated motion controllers; and as a result, these Indexers have features not found in your typical single-axis product.
ORMEC's software tools reduce the conventional ...
SMLC Multi-Axis Models 30, 80, 160 and 240
SMLC
ORMEC’s ServoWire Motion & Logic Controller (SMLC) is at the center of a complete machine control solution that can meet all of your motion, I/O and networking needs. This platform puts ORMEC's motion engine together with a high performance PLC capability and world class open standard software ...
The PS 30 is a PCI-PC control card consisting of a plug-in card and a card for slot panel mount. Three axes with 2-phase step motors or brush DC servo motors can be operated (mixed equipment). Each axis has two inputs for incremental encoder or position measuring system. Thus, very precise ...
The PS 90 is a modular designed position control for maximal nine axes, divided in three groups, each with three axes. Because of this special feature, it is possible to operate respectively three 2-phase step motors or DC servo motors (brush and brushless). Each axis has two inputs for incremental encoder or position measuring system. Thus, very precise positioning in closed loop ...
The PS 35 as an universal position control in a table top with
LCD controls up to 3 axes of 2 phase step motors or DC servo motors (brush). Different combinations of both motor types are possible. The display shows the status of each axis and its position
with ...
FCS Card
ISS developed a unique data acquisition card for Fluorescence Correlation Spectroscopy (FCS) applications, featuring:
* Acquisition and storage of raw data, which can be utilized for further analysis
* Capability of simultaneous data acquisition in two ...
HB16 Stepper Motor Controller *
The internally powered HB16 Stepper Motor Controller can control up to 14 stepper motors used in either ...
The MCQ Data Acquisition Board is designed to provide a complete data acquisition solution ...
The "Sensor Module Demo Board" is a developing tool appositely made for the "sensor module".
This developing kit is a complete tool that allows the user an high precision mass flow control.
As well as a mass flow controller, "the sensor module" reads the incoming gas flow and operates accordingly on the proportional valve opening in order to obtain the desired mass flow outcome. The adaptive ...
Interroll provides a range of solutions of DriveControl boards ...
