|
|
- Satin-chromed body
- With Tungsten carbide measuring tip
- With double dial indicator for measuring mm stroke
- Shockproof
- Micron versions are jewelled
- Adjustable scale with stop screw
- Some models offer tolerance indicators, see picture
- Can be supplied with or without "lug" on back plate
- 400-03 features remote operation control by cable plunger
- Packed in foam box
|
|
|
Shockproof and waterproof dial indicator. Insulation against water and dust in the most delicate areas. Rubber casing to protect the spindle and rack. The upper part of the dial indicator is insulated by a protective cap. The front and back of the dial face are protected by seals while the special shape of the locking ring ensures maximum protection. Rotating bezel with tolerance markers. Manufactured as per DIN 878. Supplied in case.
|
|
List of Dial Indicator: List of functions implemented in various models of dial indicators.
Compact type Dial Indicator: Compact type with a maximum scale frame diameter of 41 mm.
Dial Indicator 2046S: 10 mm-stroke, regular dial indicator with a minimum reading of 1/100 mm.
Large Dial Type Digimatic Indicaor: Large dial type with a measuring range of 20 mm or more.
|
|
Provide the advantages of mechanics combined with electronics – All in one.
• Inductive measuring system,
patented.
• Analogue and numerical
indication.
• Numerical interval to
0,01/0,001 mm.
• Selectable scale division :
10, 20, 50 µm/1, 2, 5 µm.
• Water and coolant resistant
(IP65).
• Metric/inch conversion.
• RS 232 data output combined
with external power supply.
• Displayed measuring modes
(NOR/MIN/MAX/MAX-MIN).
• Automatic shut-down.
• Compatible with all TESATAST
accessories.
|
|
|
|
|
|
Dial Indicators Group 4
Features:
- High amplification movement permits:
Graduations as fine as .00002"
Improved readability and minimized judgement error
Performance comparable to more expensive gaging methods
Convenient portability - no external connection required
Interchangeability - can be used in the same environment as any other mechanical dial indicator
Simplified service - complete movement is easly removed from the case for cleaning or direct replacement at low cost
- Lever principle of amplification - minimizes effect of spindle sideshake. Linearity and repeatability maintained through millions os cycles
- 3-5/8" bezel - conforms to ANSI/AGD standards
- Adjustable gaging force - easily adjustable from 2 to 5 oz. by externally accessible screw
- External zero adjustment knob - makes possible the advantage of adjusting dial indicator hand to zero rather than rotating bezel to 'zero' hand
- Optional lifting lever or cable release. Use lifting lever only when dial indicator is back mounted. Cable release may be used when dial indicator is back or stem mounted and enhances stability of gaging setup
|
|
MarCator Small Dial Indicator 803 A Standard version
- For application in cramped conditions
- High precision gears and pinions
- Lifter protection cap on the top of the measuring spindle
|
|
|
Starrett offers an exceptionally broad range of indicators including test and back-plunger models, electronic and dial AGD Indicators, holders and accessories, and Special Function Dial Gages. Starrett indicators are also broadly used as part of custom solution applications.
|
|
General description
MU-1 m/MU-01Z
Scale graduation: 0.001mm or 0.0001"
Travel: 1 mm/0.04"
Accuracy according to DIATEST standard
Various measuring pressures
MU-10 m/MU-1Z
Scale graduation: 0.01 mm or 0.001"
Travel: 10 mm/0.5"
Accuracy according to DIN 878 or DIATEST standard
Various measuring pressures
Micro comparator (F-1000)
Scale graduation: 0.001 mm
Measuring range: ± 0.05 mm
Accuracy according to DIN 879
Various measuring pressures
MDU-125
Measuring range: 12.5 mm or 0,5"
Resolution: 0.01 mm/0.001 mm (0.0005"/0.00005")
LCD digital display
Can be switched from mm to inch
Data output: opto-RS232
Model MDU-A with traffic light display and min/max function
Model MDU-M with min/max function (only for split-ball and plunger probes)
Analodig (ANA)
Measuring range: ± 0.2 mm digital/± 0.05 mm analogue
Resolution: 0,001 mm
Optional with output similar to RS232 and min/max-function
|
|
|
|
