|
|
|
|
|
|
JetI/O 6510 is a Block I/O module equipped with one Ethernet port and 8 channels Analog Input connectors. JetI/O 6510 provides 16 bit resolution and high accuracy for I/O data collecting. The analog input range can support from 150mV to 10V and 20mA. The values are most adopted in the industrial environment.
The JetI/O 6510 supports advanced peer-to-peer I/O function. The logic result of IO channels from one device can be sent to more than one peer JetIO devices without additional intermediate controller and thus modify their channel status.
With the peer-to-peer I/O function JetI/O 6510 can configure with up to 8 Unicast IP addresses of the peers reducing network traffic, saving all devices’ computing power, as well as making peer-to-peer activity across a LAN segment easily.
JetI/O 6510 provides Windows Utilities, SNMP and Web for configuration. Industrial Modbus/TCP protocol and OPC Server driver for integrating JetI/O with existed HMI/SCADA. Robust aluminum case is with good heat dispersing and IP31 protection. With JetI/O users can easily perform status monitoring and control the remote I/O devices.
Major features include:
* Ethernet Block I/O with 8 Channel Analog Input from 150mV to 10V, 20mA
* 16 bits resolution and high accuracy
* High/Low Voltage/Current active alarm
* Flexible peer-to-peer I/O through one-to-one, one-to-many, many-to-one, and many-to-many communication
* Unicast for network efficiency and true remote I/O
* Free OPC server and support Modbus/TCP
* Built-in watchdog timer and real-time clock
* SNMP / Web for easy configuration and management
* Operating temperature -25~70℃
* IP31 case protection
|
|
ISOLATED SCMD DIGITAL I/O MODULES
Dataforth offers a broad line of digital input and output modules and accessories providing safe, reliable interfacing to industrial measurement and control applications. When installed near individual field loads, our SCMD series I/O modules create a rugged protective isolation barrier, effective to 4kV, between the field and computer system. Use of these modules can also reduce field wiring costs while establishing an economical, manageable approach for system expansion and repair.
|
|
VXI Technology is one of the leading suppliers worldwide of modular test solutions, offering a broad selection of instruments capable of meeting widely varying customer needs and applications. We develop high-performance instrumentation with a focus on density, modularity and price/performance.
All of our products come with industry standard drivers. These include driver source code and executable soft front panels for interactive control with the instruments.
VXI Technology provides the following types of instruments:
1. Single function, single-slot VXIbus modules
2. Multi-function instruments based on our VMIP™ platform
3. VMEbus instrumentation
|
|
|
|
|
|
Digital Input modules DI2xx
* Number of inputs: 12 / 16 / 32
* Input voltage: nom. 24 VDC / nom. 48 VDC
* Separate single group
* Interrupt inputs: max. 2
* Sink/source inputs
* Galvanic isolation
* Status indicating LED for each channel
Digital Output modules DO2xx
* Number of outputs: 16 / 32
* Output voltage: nom. 24 VDC / nom. 48 VDC
* Output current: depends on type 2.5 / 1 / 0.5 A
* Total current depends on type: 8 / 16 A
* Galvanic isolation
* Status indicating LED for each channel
Digital relay output module DOR206/xxx
* 6 relays
* normally open contact (NO), normally closed contact (NC), change-over contact (CO)
* Standard socket for SIL relays
* Electromechanic or solid state relays
* Mechanically locked relays
* Coil voltage monitoring
* LED status display for every channel
* Galvanically isolation designed for system to channel 2500 V AC
Digital In/Output modules DIO2xx
* Total channel number: 16 / 32 / 48 / 64 / 80, nom. 24 VDC
* Number configurable inputs/outputs: 16
* Number of inputs: 8 / 16 / 32
* Number of outputs: 8 / 16 / 32
* Total current depends on type: max. 8 / 12 / 16 / 20 / 24 A
* Configurable interrupt inputs
* Status indicating LED for each channel
Digital In/Output module TTL264
* Number of inputs: 48
* Number of outputs: 16
* Number sink / source outputs: 8
* Number sink outputs: 8
* TTL level: nom. 5 VDC
* Galvanic isolation
|
|
I/O-Module von Baumüller
Up to 64 I/O terminals can be operated directly at an I/O node. This means that up to 1020 I/O signals can be processed on site. This reduces the cost of wiring a machine or system.
Up to 64 I/O terminals can be operated directly at an I/O node.
Baumüller I/O components provide users with a wide range of modules for adapting to requirements in the best possible way. Industrially compatible signal types can be easily incorporated in the application for evaluation purposes.
The use of I/O islands means that the machine information can be recorded at their “origin”, transmitted to the PLC and processed.
|
|
|
The Trio CAN16 I/O module offers a compact DIN rail mounted I/O expansion capability for all Trio Motion Coordinator controllers. Up to 16 modules may be connected to the CAN link which may be up to 100m long. This provides 256 bi-directional channels of distributed I/O at 24Vdc level. All points are short-circuit proof and competely isolated from the CANbus. The Trio CANbus I/O expansion can considerably reduce machine wiring.
|
|
|
I/O Ring is a proprietary OSAI bus using fibre optics to connect different devices for the management of Input and Output signals and machine peripherals. Digital I/O modules are available for both relay (OSARING, 44 inputs + 24 outputs), and transistor (High Density, 66 inputs + 36 outputs) devices. It is also possible to connect the Pilot Panel operator console through the I/O Ring.
|
|
|
|
|
|
SIMATIC Factory Safety
I/O
The safety modules of ET 200M, ET 200S, ET 200pro (IP67) and/or the digital block peripheral device ET 200eco (IP67) are used for the distributed expansion of safety controllers. In a centralized configuration, the S7-300F CPU can be expanded with safety modules of ET 200M.
All safety modules can diagnose internal and external faults and are internally redundant. They have their own self-tests and fulfill the obtaining safety requirements. In addition, "safety" and "non safety" I/O modules can be combined in an ET 200M/ET 200S/ ET 200pro station. Both the safety and the standard I/O modules are interfaced via a fieldbus system, i.e. PROFIBUS with PROFIsafe profile.
The safety modules of ET 200S and ET 200pro can also be connected to a PROFINET network via PROFINET interface modules.
The safety SIMATIC I/Os meet the highest safety requirements:
IEC 61508, IEC 61511 and EN 62061 (up to SIL 3)
EN 954-1 (up to Category 4)
NFPA 79 - 2002 and NFPA 85
UL1998, UL 508, UL 991
TÜV certificate no: Z10 05 08 20411 002
|
|
| ... products without technical information |
| |
|
|
