CC-Link communication module COMX 51CA-RE

EtherCATEtherNet/IPPowerlink

Product headline
Real-Time Ethernet Slave communication module with SPI and Dual-Port Memory (netX 51).

Short description
The COMX communication module is designed for integration into automation devices to provide drives, robot controllers, PLCs and other control devices with a network interface. Communication tasks run autonomously on the module, independent of the host processor. Process data is exchanged via a Dual-Port Memory accessed through an 8/16-bit parallel bus or via a fast 50 MHz SPI interface. COMX supports leading Real-Time Ethernet protocols as Master or Slave and features two Ethernet ports for line topology. Protocol stacks can be changed by loading appropriate firmware; master operation requires a software license. A 10-year delivery guarantee is provided thanks to the Hilscher netX network controller.

Highlights

• Universal Real-Time Ethernet Slave interface with onboard network connector
• One hardware platform for multiple Real-Time Ethernet protocols
• Ready to use with preloaded firmware
• Firmware update via integrated web server
• Host connection via parallel dual-port memory or high-speed SPI

Supported protocols

• CC-Link IE Field Basic Slave
• Sercos Slave
• PROFINET IO-Device
• POWERLINK Controlled Node
• Open Modbus/TCP Server
• Open Modbus/TCP Client
• EtherNet/IP Adapter
• EtherCAT Slave

Order information (example)
Product designation: COMX 51CA-RE/PNS V3 — Part number example: 1571.100/PNS V3

Caractéristiques / spécifications techniques

• Part number: 1571.100
• Brief description: Communication Module Real-Time Ethernet
• Communication controller: netX (netX 51)
• Integrated memory: RAM 8 MB SDRAM; FLASH 4 MB serial Flash
• Supply voltage: +3.3 V DC ±5 %
• Typical/maximum current: approx. 530 mA / 580 mA (at 3.3 V)
• Typical power consumption: approx. 1.9 W
• Power connector: via system bus connector X1
• System interface: Parallel or serial dual-port memory interface
• System connector: 50-pin SMT connector, socket (pin distance 1.27 mm)
• Dual-port memory size: 16 KByte
• Data width: 8/16 bit
• Serial dual-port memory interface: SPI Slave, mode 3 (max. baud rate 50 MHz)
• Communication interface: Ethernet 10BASE-T / 100BASE-TX, potential-free
• Ethernet connectors: 2 × RJ45 sockets (auto negotiation and auto crossover supported)
• Diagnostic interface: UART or USB (signal at host interface; available only if integrated in host system)
• LED indicators: SYS (green RUN, yellow RDY); COM0/COM1 status (green/red); TX/RX0, TX/RX1 Ethernet activity (yellow); LINK0, LINK1 link status (green)
• Ambient temperature (operation): 0 °C … +65 °C (air flow during measurement: 0.5 m/s)
• Ambient temperature (storage): -40 °C … +85 °C
• Humidity range: 10 % … 95 % RH (non-condensing)
• Dimensions (L × W × H): 70 mm × 30 mm × 21.5 mm
• Weight: approx. 35 g … 40 g
• Mounting: using screwable metal bolts, according to comX Design Guide
• Configuration software: SYCON.net
• Conformity: RoHS: yes; CE: yes; UKCA: yes
• EMC emission: EN 61000-6-4 / BS EN 61000-6-4
• EMC immunity: EN 61000-6-2 / BS EN 61000-6-2
• ESD (EN 61000-4-2): ±6 kV, Criterion B (contact discharge)
• Burst (EN 61000-4-4): ±2.2 kV, Criterion B (communication lines, shielded)
• Surge (EN 61000-4-5): 1 kV, Criterion A (communication lines, shielded)