Electric pumps

Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm

SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...

Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W

Pressure type Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...

Flow: 80, 40, 60 l/min
Pressure: 12,800, 14,700 Pa
Power: 39, 58, 30 W

... control “Dust trap filter” Easy restart by micro swith (XP-60 / 80 only) No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...

Flow: 18, 20 l/min
Pressure: 9,800 Pa
Power: 17 W

Pressure type Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Bubble bath (air bubble injection) • Oxygen supply for fish breeding

Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm

High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 005 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 015 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 050 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or ...

Description USB connectable plug&play syringe pump for jfermi bioreactor

Flow: 0.0007 l/h - 0.02 l/h

Peristaltic pump peristaltic, pump, jFermi, 3D, modelperistaltic, pump, jFermi, 3D, model $300.00 Additional or replacement pump (Feed/Acid/Base/Antifoam) for ...

Flow: 0 m³/s - 0.375 m³/s
Pressure: 0 bar - 8 bar
Head: 90, 130 m

... configurations, the fiberglass pumps SATURNevo have superior benefits and are ideal for seawater applications and corrosive liquids and atmospheres. Long-coupled "ZGS" or close-coupled "ZMS" Compact ...

Flow: 0 m³/h - 50 m³/h
Pressure: 8 bar
Head: 48, 65 m

ROUTE centrifugal pumps are made of high-quality thermoplastic polymers. They are available in magnetic and mechanical versions, with the same external dimensions - which is a unique feature offered by ARGAL that eases ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 200,000,000 µm

... External, single, or double flushing ​ FRP accessories to empower or adapt the pump to any plant Flanges reinforced in Kevlar (more resistant) On request: chance to choose pump colour Applications Aquarium, ...

Flow: 2.2 l/min
Pressure: 220 bar
Power: 0.75, 3 kW

The Mirò injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. It is recommended ...

Flow: 2.2 l/min
Pressure: 220 bar
Power: 3 kW

... cooling fan, is designed to ensure that the heat from the motor is not transmitted to the pump body, in this way the heat-sensitive resins do not catalyze inside the equipment Cold injection prevents ...

Flow: 4 l/min
Pressure: 220 bar
Power: 3, 1.1 kW

... cooling fan, is designed to ensure that the heat from the motor is not transmitted to the pump body, in this way the heat-sensitive resins do not catalyze inside the equipment . Cold injection prevents ...

Flow: 0.4 l/min - 12 l/min

... battery accessory. Quick and easy disconnection of the drive from the pump station can be achieved with the clip lock, resulting in being able to use one drive for filling at numerous ...

Flow: 0.4 l/min - 12 l/min

Bürkle's EnergyOne barrel pump is run by a power supply unit fitted with a detachable clip lock and is installed with an innovative hybrid system that delivers fast, versatile and efficient ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

... and corrosion conditions. 　　Different product structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. There are ...

Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m

　　TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, ...

Flow: 0.1 l/min - 3.2 l/min
Pressure: 0 bar - 250 bar

Precision metering high pressure gear pump. Made in stainless steel. For products with medium to high viscosity. Suited for resins, glues, greases, silicones, mastics, etc. Rotation speed : up to 200 rpm (depending ...

Flow: 2.3 m³/h

Electric pumps for AdBlue Descriptive Technical data Designed for transferring AdBlue or water Current: 22 (JEV112-ADBLUE), 13 (JEV124-ADBLUE) Working cycle: 20 min Specifications ...

Flow: 2 m³/h
Pressure: 1.5 bar

... : 20 min Specifications and advantages: Electric pump for AdBlue Characteristics More Information Fluid - Adblue, Water with low solids contect Technology - Membrane ATEX - No Pump ...

Flow: 2 m³/h
Head: 0 m - 15 m
Power: 0.26, 0.31, 0.4 kW

... 2 (JEV100EQ-ADBLUE) Base: to be mounted on the barrel Electric pump and gun: manual Nozzle and clamps: for tightening Specifications and advantages: Electric ...

Flow: 0 l/min - 0.02 l/min

... A second PT-SP multi-syringe pump is used as the media refilling pump. It is connected to the master PT-SP pump and automatically triggered by the master pump to refill ...

Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m

MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral ...

Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m

Regenerative turbine electric pumps Hydraulic Performace Stainless steel mechanical seal electric surface pumps with peripheral impeller, ideal for increasing or maintaining ...

Flow: 5 l/min - 60 l/min
Pressure: 1 bar - 10 bar
Head: 1 m - 120 m

... implementation with control sensors. For all electric pumps with three-phase motor and single-phase motor size Gr. 56-63-71, cRUuscertificationisavailable. The ...

Flow: 4.2 l/min
Pressure: 264 bar

Optimum spraying results due to low pressure fluctuations Robust unit with few wearing parts and simple assembly and disassembly Minimalist design: all operating elements positioned on the front and thus quickly accessible The WIWA ...

Flow: 0.2, 0.4 l/min
Pressure: 40 MPa
Power: 0.75 kW

... has long been committed to the design and development of new technologies and new products. SOATOER Double Line Electric Lubrication Pump Fuel tank volume 30-60-100KG Applicable grease≤NLGI2 With ...

The MG4 solenoid pump is a high performance solenoid pump with four oil outlets, this electric pump has a compact design with 24 V DC, 220V supply voltage. ...

The MG2 solenoid pump is a high performance solenoid pump with two oil outlets. This electric pump has a compact design and is equipped with a 24 V DC, ...

Pressure: 0.4 bar - 2.5 bar

Full PTFE bellows pump Pump head can be rotated in 90° steps and connected to the gas line from the top or side Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on the vacuum ...

Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C

... capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and + 40 °C. The construction ...

Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C

- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material ...

Flow: 600 m³/h
Head: 15 m
Power: 55 kW

... Sucking from all kinds of the fly ash power plants, coal slime Product Features 1. It is mainly composed of a motor, pump shell, impeller, guard plate, pump shaft, bearing seals, ...

Flow: 1,500 m³/h
Head: 35 m
Power: 250 kW

The electric submersible sludge pump puts the electric motor and mechanical pump on the same axis and then dives into the medium to dredge sand, mud, ...

Flow: 30 m³/h - 2,500 m³/h
Pressure: 12 MPa - 50 MPa
Head: 15 m - 130 m

1. Product Features 1. It is mainly composed of a motor, pump shell, impeller, guard plate, pump shaft, bearing seals, etc. 2. Unique mechanical seal device to protect the motor from ...

Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m

... without wasting energy, thereby extending pump life. - Starts and stops pump gently, thus reducing peak absorption, mechanical stress. - Protects pump and drive from ...

Flow: 0 m³/h - 18 m³/h
Pressure: 3 bar
Head: 2.5 m

... solar pumps for the circulation and filtering of pool water. It guarantees: Energy saving thanks to photovoltaic energy supply and variable-speed operation. Quick and simplified installation thanks to the electronics ...

Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W

... proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump provides high head even at low rpm, ...

KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...

Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm

CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical ...

Flow: 6, 5 l/min
Pressure: 1.2 bar
Head: 40 mm

CMP40W,miniature diaphragm pump,vacuum micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Long ...

air MAGNETIC DIAPHRAGM pump Spec Type:Aeration Pipe,Areator,Other air pump:air MAGNETIC DIAPHRAGM pump Key Features * Low Noise * High Durability * No Lubrication Necessary * ...

Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...

Close-coupled Centrifugal Pump for sea water and hot spring Spec Type:Other Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 ...

Power: 1,400 W
Length: 195 mm
Width: 195 mm

... / repair of electronic cards and tinning or de-stripping of parts. Wide choice of brazing nozzle: directional in titanium, wettable or specific to measure, The nozzles are quickly interchangeable. No wearing parts (no ...

HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...

Lobe pump is widely used to transfer high viscosity liquid and semi-solid liquid. Lobe pump can transfer sauce, cream,food, cosmetic, pharmaceutical liquid,mayonnaise,syrup,meat paste and so on. Rotor ...

Power: 22 kW

Rotor pump is called as rotary lube epump, sole pump, three-lobe pump, etc. When the simultaneously reverse-rotating 2 rotors (having 2-4 gears) revolve, they provide a suction force ...

Flow: 38.32 us gal/min - 243.4 us gal/min
Pressure: 6.89 bar - 344.73 bar
Power: 0.04 kW

The Williams Solar Chemical Injection Pump (SCIP), previously known as the Solaroy®, is a highly efficient DC-powered injection pump operated by 12 or 24 VDC power. This solar pump was ...

Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm

... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal ...

Flow: 0.02 l/min - 0.5 l/min
Fluid temperature: 41 °F - 113 °F
Length: 3 in