- Hydraulics - Pneumatics >
- Pump >
- Electric pump
Electric pumps
Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m
ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants
Zenit
Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW
Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks
Zenit
Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW
Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications
Zenit
Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW
... 4 BSP inlet. The pump motor is single phase. This pump is equipped with an automatic system that stops operation in the absence of lubricant in the reservoir. APPLICATION Oil ...
Dropsa spa
Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C
... This range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar. The pump can be provided with or without a tank, is cam actuated and a spring controlled ...
Dropsa spa
Flow: 0.35, 0.5, 1.2 l/min
Power: 0.19 kW - 2.2 kW
These new electric gear pump units have been designed as the result of over thirty years experience in the field of developing and manufacturing gear pumps. The application possibilities ...
Dropsa spa
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Aalborg Instruments
Pressure: 0 bar - 0.848 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0.0006 l/min - 5 l/min
Input diameter: 1 mm - 8 mm
Length: 191 mm
... product or the pump itself is prevented. However, most instruments are difficult to program, are oversized and bulky. DOSE IT has been especially designed for laboratories looking for an easy-to-use, compact ...
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW
... automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. This ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 5,000 l/h - 14,000 l/h
... the motor shaft becomes the centrifuge shaft. The motor mounts directly beneath the bowl and its single shaft extends directly into the bowl. Driving the centrifuge directly from the motor ...
Waukesha Cherry-Burrell
Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...
Waukesha Cherry-Burrell
Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...
Waukesha Cherry-Burrell
Fluid temperature: 15 °C - 40 °C
... spacing, which greatly increases pipetting velocity. 02 With a excellent-performance drive control unit The pipette is equipped with a excellent-performance drive control unit and provides CAN, RS232 ...
Keyto Fluid Technology
... Syringe Pumps Series, we also call Integrated sampling precision system is a precision sample addition component independently developed by Keyto. Its main function is to realize accurate and quantitative liquid aspiration ...
Keyto Fluid Technology
Pressure: 0 MPa - 0.6 MPa
Head: 2 m - 4 m
Input diameter: 0.3 in
... and discharge liquid(CV): - 0.5% Piston material: - Zirconia/Aluminium Oxide Pump head material:POM/PVDF/PPS/ETFE (open-moulded pump head ETFE only) Stepper motor (1.8°):42 stepper ...
Keyto Fluid Technology
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Emile Egger & Cie SA
Flow: 180 l/s
Pressure: 16 bar
Head: 100 m
Turo® Vortex TA impeller for pumping of raw municipal sewage with a high content of fibers without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge ...
Emile Egger & Cie SA
Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m
The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications - Demanding fluids ...
Emile Egger & Cie SA
Flow: 1.2 m³/h - 55 m³/h
Pressure: 10, 5 bar
Fluid temperature: 150 °C
... Eccentric Disc Pumps have been known for their reliability, durability and cost effectiveness, earning a reputation as the ideal pumping technology for some of the harshest applications in the world. With thousands operating ...
MOUVEX
Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C
... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, safety and product containment. ...
MOUVEX
Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm
... durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully maximize product containment. SLC Series pumps ...
MOUVEX
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...
Albin Pump
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable ...
Johnson Pump
... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Compact, ...
Johnson Pump
Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m
Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution 150 lbs ANSI B 16.5 available ...
Johnson Pump
Flow: 0 l/min - 2.1 l/min
Pressure: 0 mbar - 400 mbar
Fluid temperature: -25 °C - 55 °C
... range of -25 to 55 °C, with this unique set of features Disc Pump enables advances across a broad spectrum of Gas Sampling, Detection, Monitoring and Analysis applications. All of our pump designs ...
Flow: 0 l/min - 1.65 l/min
Pressure: 0 mbar - 300 mbar
Fluid temperature: 5 °C - 40 °C
... Micropump The BL Series Disc Pump, low cost micropump strikes a balance between performance and cost. Like all Disc Pumps, the Disc Pump combines silent operation, pulsation-free flow, ...
Flow: 0 l/min - 1.2 l/min
Pressure: 270 mbar
Fluid temperature: -25 °C - 40 °C
... Series Disc Pump – long lifetime micropump has been optimised for long service life, delivering in excess of 5,000 hours continuous operation under the most demanding conditions. Over 5,000 hours, cycling 20,000 times ...
Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...
DESMI Pumping Technology A/S
Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C
Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes ...
DESMI Pumping Technology A/S
Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m
... centrifugal pump designed for high media temperatures for boiler water application and district heating applications up to 180°C. Concept Features: • Duplex stainless steel shaft. • Closed impeller design to achieve ...
DESMI Pumping Technology A/S
Flow: 0.35 m³/h
Power: 10 W
Fluid temperature: 80 °C
Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 0.38 m³/h
Power: 10 W
Fluid temperature: 80 °C
Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C
... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...
Siebec
Flow: 160, 200 m³/h
Head: 0 m - 30 m
Power: 16.1, 20.2, 28.4 kW
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...
DRAGFLOW
Flow: 0 m³/h - 150 m³/h
Head: 0 m - 39 m
Power: 12.8, 10.4, 15.2 kW
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...
DRAGFLOW
Flow: 0 m³/h - 150 m³/h
Head: 0 m - 22 m
Power: 8.7, 12.8 kW
... High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions. Pumps are CE certified. UL/CSA certification ...
DRAGFLOW
Flow: 50 l/min - 510 l/min
Head: 0 m - 30 m
Power: 0.26 kW - 2.2 kW
... magnet pump which uses the pump casing divided into the front casing and the rear casing to form a vortex chamber as an ideal form. Therefore, the internal leak phenomenon, which means that the liquid ...
IWAKI Europe GmbH
Flow: 1,600, 1,200 l/min
Pressure: 1.6 MPa
Head: 80, 85 m
The MTFO series is characterized by its wide power range of up to 22kW. The open impeller enables also applications with a solids content of up to 30%.
IWAKI Europe GmbH
Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW
... support structure enable motor removal safely without chemical leakage. ISO compliant The MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional ...
IWAKI Europe GmbH
Flow: 0.85 l/min
Pressure: 2 bar
Head: 20 m
KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral or corrosive. ...
KNF NEUBERGER
Flow: 1, 1.1 l/min
Pressure: 6 bar
Power: 33.6 W
KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral or corrosive. ...
KNF NEUBERGER
Flow: 0.018 l/min
Pressure: 1 bar
Power: 8.04, 7.2 W
KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral or corrosive. ...
KNF NEUBERGER
Flow: 4.5 l/min - 5 l/min
Pressure: 9 bar
Head: 2.5 m
electric pump and 3 m outlet and suction hose and accessories: delivery gun, meter, suction accessories (depending on the model).
SAMOA Industrial, S.A.
Flow: 10, 11, 13 l/min
Pressure: 0 bar - 15 bar
Power: 780, 600 W
Internal gear electric pumps for lubricants.motor depending on model, IP-55 protection and on/off switch. Cast iron pump body, sintered steel gears and by-pass valve. Motor ...
SAMOA Industrial, S.A.
Flow: 32, 30 l/min
Pressure: 1.6 bar
Power: 260 kW - 500 kW
Multi-diaphragm pumps with no mechanical seals designed for dispensing AdBlue®/DEF. Pumps are self priming and have a by-pass valve. Electric motors have IP55 protection and include on/off ...
SAMOA Industrial, S.A.
Flow: 7.6, 4.3, 2.6, 4.1, 7.1 l/min
Pressure: 500 bar - 4,136 bar
Power: 11, 75, 37, 22, 30 kW
... is a configurable designed water jet pump that can be custom built based on a variety of options to meet your cutting solution requirements. From the basic model to the fully loaded, the result is a waterjet pump ...
Pressure: 3,800 bar
... pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated ...
Pressure: 3,800 bar
... The NEOLINE pump has been developed with the aim of creating a robust, easy to operate pump. It is driven by a 40 hp (29 kW) three-phase motor which is equipped with vibration isolation ...
Flow: 0.1 us gal/min - 1,050 us gal/min
Pressure: 15 psi - 600 psi
Power: 0.5 ch - 5 ch
Mag Drive series are the first progressing cavity wobble stator pumps to offer magnetic drives. The proprietary, magnetic coupling design performs well in hazardous applications and is effective with ...
NOV Inc.
Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to 28 feet, positive ...
NOV Inc.
Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F
... changing pump arrangement to match the width of the TSF opening to the drop zone • Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump ...
NOV Inc.
Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW
Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...
Brinkmann Pumpen
Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW
Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps ...
Brinkmann Pumpen
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
Immersion Pumps Our multistage pump models (S)TC25...(S)TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers provide optimal hydraulic efficiencies ...
Brinkmann Pumpen
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 ...
Flow: 0.001 l/min - 0.2 l/min
Pressure: 210 bar
... system (third pump for ternary). Solvent selection on each pump with addition of four-solvent valve (up to eight solvents) - Ability to operate additional pumps in parallel to double ...
Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar
... Dura 5 peristaltic pump for high pressure low volume. Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by ...
Verder Liquids
Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar
... 7 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...
Verder Liquids
Flow: 0 l/h - 222 l/h
Pressure: 6, 12 bar
... 10 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...
Verder Liquids
Flow: 5.4 l/min
Power: 100 W
... The connection technology of the pump head is designed for fast handling. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 10 l/min - 350 l/min
Power: 30 W
... The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump heads or piston pump heads. Pump heads from other manufacturers can also ...
Hirschmann Laborgeräte GmbH & Co. KG
Flow: 5.4 l/min
Power: 100 W
... touchscreen control unit. The pump head linking technology has quick handling assurance. The range of rotarus® products encompasses a comprehensive selection of single and multichannel peristaltic pump ...
Hirschmann Laborgeräte GmbH & Co. KG
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining