Flow: 2.3 m³/h
... Electric pumps for AdBlue Descriptive Technical data Designed for transferring AdBlue or water Current: 22 (JEV112-ADBLUE), 13 (JEV124-ADBLUE) Working cycle: 20 min Specifications and advantages: ...
Pompes Japy
Flow: 2 m³/h
Pressure: 1.5 bar
... Working cycle: 20 min Specifications and advantages: Electric pump for AdBlue Characteristics Fluid - Adblue, Water with low solids contect Technology - Membrane ATEX - No Pump ...
Pompes Japy
Flow: 2 m³/h
Head: 0 m - 15 m
Power: 0.26, 0.31, 0.4 kW
... 2 (JEV100EQ-ADBLUE) Base: to be mounted on the barrel Electric pump and gun: manual Nozzle and clamps: for tightening Specifications and advantages: Electric ...
Pompes Japy
Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W
... One-Stop Solution for Compact Wastewater Treatment. Embedded control panel and the switching valve. Capable of setting programs optimized for SBR and other wastewater treatment systems. A program for the US market is also available. ・Domestic ...
HIBLOW
Flow: 80, 40, 60 l/min
Pressure: 12,800, 14,700 Pa
Power: 39, 58, 30 W
... control “Dust trap filter” Easy restart by micro swith (XP-60 / 80 only) No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small capacity ...
HIBLOW
Flow: 18, 20 l/min
Pressure: 9,800 Pa
Power: 17 W
... Pressure type Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Bubble bath (air bubble injection) • Oxygen supply for fish breeding ...
HIBLOW
Flow: 15 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 45 m
... run dry without damaging it •The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber •Can be operated by small power packs or by the hydraulic ...
Flow: 1,900, 1,550 l/min
Head: 50 m
... The pump housing can be open in few minutes without tools, for inspection of the impeller and the pumping chamber 38 L/min @ 140 Bar 30 L/min @ 140 Bar 20 L/min @ 140 Bar • Can be operated by small power ...
Pressure: 0.4 bar - 2.5 bar
... Full PTFE bellows pump Pump head can be rotated in 90° steps and connected to the gas line from the top or side Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on the vacuum and pressure ...
M&C TechGroup Germany GmbH
Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C
... capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and + 40 °C. The construction and the pump ...
M&C TechGroup Germany GmbH
Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C
... - Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material of sample-contacting ...
M&C TechGroup Germany GmbH
Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar
... The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed air connection ...
Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm
... High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level ...
Flow: 0.1 l/min - 3.2 l/min
Pressure: 0 bar - 250 bar
... Precision metering high pressure gear pump. Made in stainless steel. For products with medium to high viscosity. Suited for resins, glues, greases, silicones, mastics, etc. Rotation speed : up to 200 rpm (depending on product involved) Metering ...
Flow: 4.2 l/min
Pressure: 264 bar
... Optimum spraying results due to low pressure fluctuations Robust unit with few wearing parts and simple assembly and disassembly Minimalist design: all operating elements positioned on the front and thus quickly accessible The WIWA EFFECTIVE for ...
Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm
... CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1. ...
ALLDOO Micropump | Micro Diaphragm Pumps
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 6, 5 l/min
Pressure: 1.2 bar
Head: 40 mm
... CMP40W,miniature diaphragm pump,vacuum micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Long lifetime ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.00001 l/min - 0.861 l/min
... This peristaltic pump is ideal for the simple conveying of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump ...
Heidolph Instruments GmbH & Co. KG
Flow: 0 l/min - 4 l/min
Pressure: 2.5 bar
... regarded peristaltic pump technology is combined with innovative digital control to provide robust performance at an economical value. These units offer a reliable alternative to lab piston metering pumps, ...
... peristaltic pump with interchangeable heads for delivering smooth, low pulse flows of biological and chemical fluids in 1, 2, 4, or 8 channel standard flow rate and 2 or 4 channel high flow rate configurations. Gilson's MINIPULS® 3 is ...
Gilson international
Flow: 105 l/h - 54,000 l/h
Pressure: 16, 7.5 bar
Fluid temperature: 80, 90 °C
... difficult chemicals and fluids, the Abaque Peristaltic Hose pump will handle your toughest pumping needs — from abrasive and aggressive to shear-sensitive and viscous fluids. Abaque pumps currently operate in some ...
MOUVEX
Flow: 44 l/min
Pressure: 150 mbar
Power: 150 W
... Our innovative vapour recovery pumps ensure safe use at filling stations all over the world. No matter whether you use belt drive or direct drive - we have the right products for vapour recovery. Please contact us and we will be glad ...
Flow: 20.8 l/min
Pressure: 1.4 bar
... Low power consumption Variable mounting foot positions Customer choice of plug and lead length Designed for minimum 5 years nominal operation Applications: Hot and cold drinks vending machines, where the seal-less design prevents contaminants ...
FLOJET
Flow: 8 l/min - 13.4 l/min
Pressure: 90 bar - 172 bar
Power: 2.2 kW - 4 kW
... Brass Head Forged Bronze Connecting Rods with Lifetime Warranty Hardened Stainless Steel Piston Guides High Efficiency Stainless Steel Check Valves Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers High Quality Buna- Textile Double-Sealing ...
COMET Spa
... range of H20 pumps available in diesel and electric versions, developed specifically for use with down-the-hole (DTH) hammers on H20 systems. Accessories such as an intake filter, pressure control and remote-capable H20-line ...
Ripamonti Dr Gianni S.r.l
Flow: 12 l/h
... min it takes 1,111 hours to dispense 1 ml. The pump systems can have up to 16 pumps and are ideal for catalyst research. Pump 1 adds Reagent 1 at 5ml/min, Pump 2 adds reagent 2 at 6.845 ...
... applications for chemistry diaphragm pumps include evacuating chemically aggressive gases and vapors from such equipment as rotary evaporators, vacuum drying cabinets and centrifugal concentrators Chemistry diaphragm ...
Radleys
Flow: 56, 72 l/min
Power: 370, 500 W
... Technical Features • - Cast-iron pump casing, treated against corrosion and paint-finished. • - Vane pump with sintered steel rotor and acetalic resin blades. • - Mechanical seal. • - Bypass valve built into pump ...
Emiliana Serbatoi
... KD Scientific's Infusion Syringe pumps are suitable for transporting accurate amounts of liquid for numerous syringe pump operations. These applications include the infusion of calibrant into a mass spectrometer or reaction ...
KDS
Flow: 30, 20, 60, 40 l/min
Pressure: 16 bar - 20 bar
Power: 3.81, 2.6, 1.3 kW
... The electric piston pumps of the tim®ECO series have been especially developed for larger paint supply systems. In addition to a small, compact design, which allows integrating the pumps ...
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... • Voltage : Single phase • Motor power (watt) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable ...
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
... A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a pumping ...
Elettromeccanica Delta S.p.A.
Fluid temperature: 0 °F - 180 °F
... AP4 Ultra from QED will last up to 10 times longer between service events. Tested in the most severe applications, this new pump ran longer and was easier to clean than the control group. Several improvements contribute to this longevity. ...
QED Environmental
the best suppliers