|
|
Material generally linked to a fire system which will automatically release the industrial fire doors in case of a fire, by switching the power off.
Electromagnetic holder mounted in a metallic box painted with white epoxy, with cabled local release button, protection level IP42, delivered with an equipped magnetic pin |
|
DICTATOR manufactures electromagnets tested and approved according to the EN 1155:2005.
An extensive product range of electromagnets and professional counter plates
covering most applications.
Holding forces up to 5000N
Voltage: Standard 24 VDC, other tensions also possible
Special designs
- Ex-proof industrial magnets
- IP65
- Magnets with UV-resistant sealing resin for outside applications
- Magnets to be integrated in overhead industrial door closers
- Customized designs
|
|
Actuators suppliers for fire industrial dampers, explosion proof
Electrical, explosion proof quarter turn actuators series ExMax and RedMax, for fire dampers, from 5 Nm to 50 Nm, in acc. with ATEX 94/9/EG for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with fail safe spring return function. Spring return up to 15 Nm in 3 or 10 sec., 30 Nm and 50 Nm in 3 or 20 sec. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 100 % overload protected, robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40°C to +40°C/+50°C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12x12 mm (size S) and 16x16 mm (size M). series ExMax-... for use in zone 1, 2, 21 and 22. series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal cases and mounting brackets available. Manufacturers of connector for safety temperature sensor supplier (type FireSafe) for direct connection from sensor to actuator available. |
|
URR
The URR water supplier of nozzle produces a pressurized water spray which canbe continuously adjusted from a powerful straight jet, to a 160° round water curtain with a 11 meter (36 feet) diameter.
Please note the capacity changes in these two extreme operating conditions.
A strong rubber ring circles the diameter immediately behind the orifice, to avoid damages due to shocks.
URS
These lances make it possible to insantly switch among three different conditions, that is closed %u2013 straight jet %u2013 adjustable full cone spray.
The two larger size models can be supplied complete with an optional water curtain, to avoid the fire fighter beoing exposed to radiant heat from the open flame. |
|
FLAME RETARDANT GARMENTS PART OF THE 3-LAYER SYSTEM! Contact with open fire, hot surfaces or radiant heat is a reality in many workplaces. In industry, on construction sites and in many other trades it is important to protect yourself and your employees against these threats. HH Industrial workwear includes an extensive collection of flame retardant garments.
>> Helly Hansen Workwear’s flame retardant industrial clothing is approved for use in environments where there is a risk of incidental contact with open flames or when there is a danger of short term exposure to strong radiant heat. The products should be used with other flame retardant clothing. Please contact us for guidance, to ensure you choose the right flame retardant clothes for your needs.
Base and Thermal Layers
The professional fabric in the flame retardant base layer is 50% flame resistant Lenzing® viscose and 50% wool, which provides insulation as well as flame resistance. The flame retardant viscose fibres have been treated with a mixture of phosphorus and sulphate. The flame retarding treatment is permanent and effective, even after the garments have been repeatedly washed. The combination of wool and viscose provides good insulation properties and a high level of comfort. Flame retardant fibre pile is made of 80% Zirpro®-processed flame retardant wool and 20% flame retardant Trevira SEC®. This process ensures permanent and effective protection. All zips, cuffs, etc, are also made in flame retardant materials. Helly Hansen flame retardant fibre pile has been approved and listed by NATO |
|
| Air purifying suppliers of respirators use cartridges or canisters constructed of carbon or paper-based professional filters to remove contaminants or particles from non-IDLH (Immediately Dangerous to Life and Health) environments. Air purifying respirators that rely on the user's inhalation to draw the ambient air over the filters are called negative pressure air purifying respirators. Those that utilize professional blower to pull the ambient air through the filters and then push it to the user are called positive pressure air purifying respirators. Air-purifying respirators have numerous applications from construction and automotive repair to pharmaceutical and oil production. |
|
| ... products without technical information |
| |
Material generally linked to a fire system which will automatically release the industrial fire doors in case of a fire, by switching the power off.
Electromagnetic holder mounted in a metallic box painted with white epoxy, with cabled local release button, protection level IP42, delivered with an equipped magnetic pin |
|
DICTATOR manufactures electromagnets tested and approved according to the EN 1155:2005.
An extensive product range of electromagnets and professional counter plates
covering most applications.
Holding forces up to 5000N
Voltage: Standard 24 VDC, other tensions also possible
Special designs
- Ex-proof industrial magnets
- IP65
- Magnets with UV-resistant sealing resin for outside applications
- Magnets to be integrated in overhead industrial door closers
- Customized designs
|
|
URR
The URR water supplier of nozzle produces a pressurized water spray which canbe continuously adjusted from a powerful straight jet, to a 160° round water curtain with a 11 meter (36 feet) diameter.
Please note the capacity changes in these two extreme operating conditions.
A strong rubber ring circles the diameter immediately behind the orifice, to avoid damages due to shocks.
URS
These lances make it possible to insantly switch among three different conditions, that is closed %u2013 straight jet %u2013 adjustable full cone spray.
The two larger size models can be supplied complete with an optional water curtain, to avoid the fire fighter beoing exposed to radiant heat from the open flame. |
|
| ... products without technical information |
| |
Actuators suppliers for fire industrial dampers, explosion proof
Electrical, explosion proof quarter turn actuators series ExMax and RedMax, for fire dampers, from 5 Nm to 50 Nm, in acc. with ATEX 94/9/EG for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with fail safe spring return function. Spring return up to 15 Nm in 3 or 10 sec., 30 Nm and 50 Nm in 3 or 20 sec. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 100 % overload protected, robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40°C to +40°C/+50°C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12x12 mm (size S) and 16x16 mm (size M). series ExMax-... for use in zone 1, 2, 21 and 22. series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal cases and mounting brackets available. Manufacturers of connector for safety temperature sensor supplier (type FireSafe) for direct connection from sensor to actuator available. |
|
FLAME RETARDANT GARMENTS PART OF THE 3-LAYER SYSTEM! Contact with open fire, hot surfaces or radiant heat is a reality in many workplaces. In industry, on construction sites and in many other trades it is important to protect yourself and your employees against these threats. HH Industrial workwear includes an extensive collection of flame retardant garments.
>> Helly Hansen Workwear’s flame retardant industrial clothing is approved for use in environments where there is a risk of incidental contact with open flames or when there is a danger of short term exposure to strong radiant heat. The products should be used with other flame retardant clothing. Please contact us for guidance, to ensure you choose the right flame retardant clothes for your needs.
Base and Thermal Layers
The professional fabric in the flame retardant base layer is 50% flame resistant Lenzing® viscose and 50% wool, which provides insulation as well as flame resistance. The flame retardant viscose fibres have been treated with a mixture of phosphorus and sulphate. The flame retarding treatment is permanent and effective, even after the garments have been repeatedly washed. The combination of wool and viscose provides good insulation properties and a high level of comfort. Flame retardant fibre pile is made of 80% Zirpro®-processed flame retardant wool and 20% flame retardant Trevira SEC®. This process ensures permanent and effective protection. All zips, cuffs, etc, are also made in flame retardant materials. Helly Hansen flame retardant fibre pile has been approved and listed by NATO |
|
| Nomex® AP is a new offering in the DuPontTM Nomex® Professional workwear collection that helps minimize burn injuries associated with electric arc flashes by meeting NFPA 70E criteria for Hazard/Risk Category 2 arc protection. Nomex® AP helps provide permanent FR protection that cannot be washed out, bleached out or worn away. Available in shirts, pants, coveralls and in denim jeans from Preferred Partners of DuPont. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| Air purifying suppliers of respirators use cartridges or canisters constructed of carbon or paper-based professional filters to remove contaminants or particles from non-IDLH (Immediately Dangerous to Life and Health) environments. Air purifying respirators that rely on the user's inhalation to draw the ambient air over the filters are called negative pressure air purifying respirators. Those that utilize professional blower to pull the ambient air through the filters and then push it to the user are called positive pressure air purifying respirators. Air-purifying respirators have numerous applications from construction and automotive repair to pharmaceutical and oil production. |
|
The Scott Eagle X is a user-friendly compact, durable and lightweight thermal imaging camera.
Its fast-attack technology for easy interpretation of images has proved invaluable in a wide variety of firefighting, police, and security applications.
Inspired by end-user safety professionals requiring heat source identification, the Eagle X design utilises the same proven technology as the Scott Eagle Imager 160 and offers all the must-have features in a thermal imaging professional camera - without numerous high-end options.
Simple to operate, reliable and cost-effective, the Eagle X combines clear and crisp thermal imaging technology in a compact, reliable and affordable camera.
|
|
Scott's Eagle Imager 160 is the flagship industrial camera of Scotts thermal imaging range. The heart of the Eagle Imager 160 is a Fire-CooledTM microbolometer core that produces sharp, high resolution images in challenging high heat conditions, as well as in much cooler environments. The Eagle Imager 160 is an invaluable tool in image interpretation because it generates images without the ghosting, halos or image artifacts associated with other technologies
|
|
... see all the products in the category
Hoses
|
|
|
see the results for the following category
