|
|
|
Allows driver to use the same lift truck to handle either single or double pallet loads. Spreading the four forks allows handling of two pallets side by side. When brought together, the four forks convert to two forks ready for single pallet handling. Forks are hydraulically positioned for fast and efficient material handling. Well suited for truck trailer loading and unloading.
|
|
|
Cascade makes forks for lift trucks of all makes, models and sizes. Our product line includes a full range of products for a wide cross section of industrial and commercial applications.
|
|
|
G-Series Rotators give your driver the ability to quickly dump or invert a load, and then immediately return the forks to the pick-up position in one continuous motion. Cascade rotators are widely used in food processing, automotive manufacturing, chemical processing, recycling operations, smelting and casting operations, and general manufacturing—anywhere it is necessary to dump bins or tote boxes.
|
|
The RWV Autonome RF is a set of weighing forks with high accuracy (maximum error 0.1% of the lifted load). The RWV Autonome RF combines the strong points of the RWV Autonome (functioning independently from the truck, simple installation) with the advantage of an indicator within reach in the cabin of the truck.
By pushing a button, net weights can be measured, or the weights of several pallets can be added up to a total weight per shipment. A printer can also be installed, for printing the weight data on a ticket. Signal transfer from weighing forks to indicator is by wireless (Bluetooth) connection.
|
|
The RWV-110-RF combines the strong points of the RWV-A (simple installation, functioning independently from the lift truck) with the advantage of an indicator within reach of the driver, in the cabin of the truck. Signal transfer from weighing forks to indicator is by Bluetooth connection.
By pushing a button, net weights can be measured, or the weights of several pallets can be added up to a total weight per shipment. A printer can also be installed, for printing the weight data on a ticket.
Standard Class 2 or 3 fitting, simply exchange standard forks for scale forks. Maximum error 0.1% of the lifted load. Supplied with indicator 110.
|
|
The RWV-A is a set of scale forks with high accuracy (maximum error 0.1% of the lifted load), which is also available in a NTEP approved legal-for-trade version.
A weight indicator is mounted on top of the left fork, a rechargeable battery on the right fork, so that the scale functions completely independent from the forklift truck. The weighing forks have a standard Class 2 or 3 fitting, so you can mount the system yourself, within minutes: you simply exchange the standard forks for the weighing forks.
The RWV-110-A is supplied with indicator 110 (standard scale functions), the RWV-310-A is supplied with indicator 310 (extended functions, NTEP approved).
The RWV-A is suitable for accurate check weighing: checking incoming goods, determining shipping weights, filling big bags.
|
|
FORK CLAMP WITH FOLDABLE ARMS FOR HANDLING OF BLOCKS AND BRICKS
HYDRAULICALLY FOLDABLE ARMS ALLOW QUICK CHANGE OF APPLICATION FROM HANDLING PALLETS TO LATERAL CLAMPING OF LAYERS OR COMPLETE STACKS OF BLOCKS, BRICKS OR INTERLOCKING PAVING STONES.
THIS FORLIFT TRUCK ATTACHMENT IS IDEAL FOR CONSTRUCTION MATERIAL DISTRIBUTORS WHO COMMISSION LOADS FOR SHIPPING TO BUIDING SITES:
|
|
|
DUE TO THE KAUP MODULAR SYSTEM WHICH IS CONSEQUENTLY FOLLOWED AND INCLUDES ROTATORS AS WELL AS CLAMPS AND SIDESHIFTERS ALL CLAMPS CAN, IN PRINCIPAL, BE BUILT ON TO A ROTATING HEAD. NATURALLY THIS DOES NOT MAKE SENSE WITH EVERY EXECUTION OF CLAMP. THE BEST KNOWN ROTATING CLAMPS ARE ROLL CLAMPS, FORK CLAMPS, BALE CLAMPS AND PALLET TURNOVER CLAMPS.
|
|
Carriage scale for lift trucks
The RVL weighing carriage plate allows weighing in combination with attachments, like clamps or rotators: the carriage plate scale is mounted between the original carriage plate of the trucks and the attachment, via standard Class 2 or 3 fittings.
The 110 weight indicator is mounted in the cabin of the truck. Signal transfer from carriage plate scale to indicator is by Bluetooth connection.
Since the combination of carriage plate scale and attachment causes a displacement of the center of gravity of the load on the forks, it is advised to recalculate the residual lifting capacity of the truck.
|
|
|
Fork positioners allow lift truck operators to move the forks quickly and accurately to fit different pallet sizes without leaving their seats.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
The RCS-110-PLUS is an accurate hydraulic scale for counterbalanced trucks and reach trucks. On a forklift truck with a capacity of 5,000 lbs the weight is displayed in steps of 5 lbs, with a + 10 lbs tolerance. The RCS-110-PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
The RCS-110-PLUS is an excellent tool for weight checks on a forklift truck, for example at goods reception, when determining shipping weights, preventing overloads on freight trucks, stocktaking, stock control etcetera.
|
|
Responding to the lift truck industry's request for a simple and economical lift truck on-board check weighing /overload safety readout that can be used in any material handling operation and will operate in severe working environment.
The ED2-Series SkidWeigh is the only forklift on-board check weighing system that is found to be installed in multiple quantities within the same company.
- Low installed cost
- Virtually maintenance free
- No operator training required
- Fully automatic
- Simple calibration with known load weight
- Operating voltage from 12 to 55 V DC
- Can be moved from one vehicle to another
- Will not reduce lift truck lift capacity
- Can be installed by a local lift truck service technician or the end user mechanic
- Resistant to industrial environments
- Field serviceable
- Wide range, check weighing capacity up to 50000 kg or lbs.
- Operating temperature ranging from -40°C to +85°C (-40 to 185° F)
- Accurate to /- .5 to 1% of vehicle lift capacity
- On-board printer capability, optional
- Accumulative weights capability, optional
- Overload strobe light warning, optional
- Dual weighing channel capability, optional
|
|
FORK POSITIONERS ARE AN IMPORTANT SUPPLEMENT OF THE FORKLIFT TRUCK ESPECIALLY WHERE THE WIDTH OF THE LOAD CONSTANTLY CHANGES. ADJUSTMENT OF THE DISTANCE BETWEEN FORKS TO ACCOMMODATE DIFFERENT WIDTHS IS AN IMPORTANT ASPECT OF SAFEGUARD IN THIS KIND OF OPERATION. KAUP REALISES THE IMPORTANCE OF THESE ATTACHMENTS AND HAS THEREFORE FOUR DIFFERENT RANGES IN ITS PROGRAMME.
THE RANGE T 163 SN: INEXPENSIVE, SIMPLE FORK POSITIONER WITH SYMMETRICAL FORK ADJUSTMENT VIA POSITIVE SYNCHRONISM OVER A ROLLER CHAIN. THE RANGE T 160: VERY ECONOMICAL FORK POSITIONER WHICH ALLOWS THE FORKLIFT TRUCK DRIVER EXCELLENT VIEW ON TO THE FORK TIPS AND THE LOAD. THE RANGE T 466: EXTREMELY VARIABLE CONCEPT WITH A TOTAL OF FOUR DIFFERENT EXECUTIONS, T466 – HOOK ON CONSTRUCTION ALLOWING USE OF ORIGINAL TRUCK FORKS, T466Z - HOOK ON CONSTRUCTION WITH FORKS WELDED ON, T466I – INTEGRATED CONSTRUCTION ALLOWING THE USE OF ORIGINAL TRUCK FORKS, T466IZ – INTEGRATED CONSTRUCTION WITH FORKS WELDED ON. THE RANGES T 411 Z, T 411 BZ, T 411 BZI AND T 411 R FORK POSITIONERS FOR EXTREMELY TOUGH OPERATION. THE T411Z RANGE IS BASED ON THE T400 CLAMPS.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
