|
|
|
|
|
|
XVARI Technology
The breakthrough in hydraulic pump technology & ergonomics
Tremendously high oil delivery, precise control and ergonomic operation; three characteristics of the new XVARI® Technology pump developed by Enerpac. Never before have these three vital product characteristics been combined in one hydraulic pump. With XVARI® Technology, Enerpac has again set a new industrial standard for succeeding the 50-year old technology of current air-over-hydraulic foot pumps. The XVARI® Technology replaces the popular and widely-used linear air motor technology with improved ergonomics, precise metering of the hydraulic oil flow and also offers a higher oil delivery for increased productivity and efficiency.
XVARI ~ Be in control
XVARI® Technology enables users to continuously and precisely control the amount of hydraulic oil flow in advance and retract mode and thereby the speed of the hydraulic cylinder or tool that the pump is powering - specifically for jobs that require accurate load positioning, aligning and controlled descend. XVARI® Technology enables the user to better control the hydraulic application, improves productivity, enhances process quality and makes the workplace safer.
|
|
OLMEC pumps are used to supply pressurized oil, emulsion or water circuits, and hydraulic users operating in on-off mode.
These pumps operate with reciprocating motion, single-acting or double-acting, powered by a pneumatic control valve which stops when the maximum hydraulic pressure is reached, maintaining the pressure in the circuit without further air consumption. If the hydraulic pressure drops, the pump is automatically restarted to restore the preset hydraulic conditions.
The most common fields of application are:
hydraulic tests on seals and resistance with oil or water;
supply of cylinders for clamping, assembly and maintenance equipment;
fixed or mobile emergency work units;
oil or grease lubrication systems;
all environments with explosion risk;
Laboratory testing;
|
|
The pneumatically hydraulic high-pressure pumps of the series PMA are laid out for the promotion of liquids with pressure up to 2.400 bar, at a pneumatics printing of 7 bar. These high-pressure pumps become everywhere there
begun, where compressed air is available as energy source and where a high and/or highest hydraulic printing is needed for test or for test purposes and/or for other applications. With compression tests the systems which can be examined are filled, aired out with a suitable liquid (oil, emulsion, pure water) under low pressure and brought afterwards by the Madan PMA of high-pressure systems on the desired pressure. All pumps of the Madan PMA series are supplied in rustproof execution (high-grade steel material 1,4401). Thus long life span and maintenance-free operation are ensured.
|
|
|
|
|
|
The Enerpac ZA4 - The Next Generation in Air Powered Hydraulic Pumps
Introducing the ZA4-series, Enerpac’s newest high-pressure hydraulic air-driven pump designed for in-plant, industrial applications and medium to large construction projects. The new ZA4 pump features the Z-Class high efficiency pump design—a design known for its higher oil flow and bypass pressure. Whether powering a cylinder or operating a tool, the ZA’s industry-leading hydraulic flow at 700 bar will improve productivity in any application. And, because of their ATEX 95 certification, the Enerpac ZA Pumps are safe for use in environments such as refinery, petro-chemical and oil & gas processing.
Reservoirs come in 4 to 40 litres capacities. A sight gauge on the 4 and 8 litres models and a level gauge on the larger reservoirs allow quick and easy oil level monitoring. The manual control valves on ZA4-series pumps come with built-in user adjustable pressure relief valve. Standard models are available to fit most applications and custom configurations, when required, are available from an extensive ordering matrix.
The optional heat exchanger warms exhaust air to prevent freezing and cools the hydraulic oil.
Enerpac ZA Series Air Hydraulic Pumps—tough, dependable and innovative.
|
|
|
|
|
|
Hydratron Air Operated Hydraulic Pumps are capable of generating output pressures of up to 45,800 PSI ( 3,160 Bar ) when supplied with just 100 PSI ( 7 Bar ) air pressure. There are 4 model ranges offering flows of up to 7 gpm ( 31.7 Ltr per min ).
These pumps will maintain pressure within a system indefinitely without consuming power or generating heat plus their output pressure can be infinitely varied by simply regulating the driving air pressure.
These pumps are ideal for pressure testing, chemical injection and for hydraulic power applications. Standard models are suitable for oil or water service having wetted parts manufactured from stainless steel and aluminium bronze. Options include all stainless steel wetted parts for pumping more aggressive chemicals with isolation chambers which keep the pneumatic and hydraulic sections of the pumps completely separate. This is particularly desirable when pumping hazardous fluids.
Pumps can be supplied individually or mounted in Power Pack form in which case they are mounted within metal frames complete with reservoirs, all necessary air controls, output pressure gauges and pressure release valves.
|
|
- Air Drive line lubrication not required.
- Self-priming for immediate operation.
- Compatible with all hydraulic fluids, plain water, distilled &
deionized water, solvents, mild chemicals and most liquefied
aerosol type gases.
- Range of models to provide up to 80,000 psi intermittent
output pressure.
- Stainless steel hydraulic body, check valves, and trim are
standard, except -4 and -7 models.
- Alternative gases that can drive the pump include nitrogen,
vapor from liquefied gas, pipeline natural gas and sour
natural gas with proper modifications.
- Offer a wide range of standard modifications.
|
|
SKF Air-driven Hydraulic Pumps, THAP series
30, 150, 300 and 400 MPa (4 350, 21 750, 43 500 and 58 000 psi)
The THAP Air-driven Hydraulic Pumps are available in four different pressure versions. They can be used for mounting OK Couplings, large pressure joints such as bearings, flywheels, couplings and railway wheels. The pumps consist of a high-pressure hydraulic pump, driven by an air piston.
The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets, which consists of pump, pressure gauge, adapter block, highpressure pipe and connection nipples.
|
|
The air-hydraulic BELL units are meant to operate single and double acting cylinders depending on the versions. This type of pump can be applied in all the hydraulic applications, especially in those which require high performances and pressures, and in all cases in which the oil flow must be modulated and controlled.
There are many applications, in the industiial field, such as stirrup, presses, extractors, pullers, hose fitting, bead breakers, clamping equipments, as well as in the automotive field for example car and motorbike lifts, pulling bars for bodyworks straightening benches.
|
|
External adjustable pressure relief valve (behind sight glass)
Lower air consumption and operating costs
Return-to-tank port for use in remote valve applications
Internal pressure relief valve provides overload protection
High efficiency cast aluminium air motor
Air pendant for remote control operation
|
|
PP - Air/hydraulic pumps (series 1000)
PP-1000 air/hydraulic pumps are very compact one-stage pumps that work in any position, horizontally or vertically thanks to a rubber bladder built in to the tank. The pumps can be operated by hand or foot.
• High oil flow.
• Easy to fill and check oil level.
• Safety valve prevents overfilling the tank.
• Return oil line can be connected to oil filler hole.
PP70-1000 - for those pumps we recommend gauge AMT801 and gauge adapter AVM204. Other combinations of gauge and gauge adapter are however possible.
PP70-1000/LS201, PP70-1000/LS250 - PP70-1000 pumps are available in a pre-mounted version with 2 m or 2,5 m hydraulic hose, quick coupling (AQI7) and swivel coupling (ASE10).
|
|
Mini hydraulic pumps model PAY
With compressed air driven motor 700 bar
These mini-pumps are driven by an air-powered motor and can be connected to any supply source of compressed air. These compact low-cost pumps can operate all single-acting or double-acting hydraulic cylinders up to a max. operating pressure of 700 bar.
Features
- Pedal in neutral position - motor stands still, cylinder stands, pressure is held.
- Pedal depressed - motor starts, cylinder advances, pressure is built-up.
- Pedal pushed forward - motor stands still, pressure is released, cylinder retracts.
|
|
| ... products without technical information |
| |
|
|
|
|
The ZA4T-Series air hydraulic torque wrench pumps can be used with any brand of 700 and 800 bar single- and double-acting hydraulic torque wrenches. The ZA4T come standard with air regulator-filter-lubricator unit, heat exhanger and pressure gauge. The standard pressure gauge with transparent overlay-scales in Nm and Ft.lbs provides accurate torque settings and precise repeatability for all Enerpac torque wrenches. The easy to access adjustable pressure relief valve allow accurate and quick setting of hydraulic pressure. The air motor consumes between 600 - 2840 l/min at 4 - 7 bar dynamic air pressure. ZA4T-Series two-speed air pumps come with 4 or 8 litres reservoir. Through the years the Enerpac line of bolting tools, such as hydraulic torque wrenches and alignment tools, has gained excellent recognition by the offshore and oil & gas markets worldwide. Through its worldwide operations Enerpac is be able to offer application-based solutions and hydraulic systems for the offshore and other industries
|
|
Resato’s new lightweight mini pump unit is available in four pressure ranges up to 1800 bar at 7 bar air drive pressure and 2500 bar at 10 bar air drive pressure.
Key Features:
- Ready-to-use.
- Pressure range up to 2500 bar / 36,250 psi.
- weight of less than 17 kg!
- Lightweight, easy to carry.
- Low noise level.
- Suitable for pressurizing oil, water or other fluids.
- Several pressure ranges available.
- All parts made of non-corrosive materials.
- All operating features panel mounted.
- Completely closed frame.
|
|
|
|
