|
|
Federal Signal's Model 121X Series C rotating light flashes 90 times per minute and produces a 360 degree visual signal. This explosion-proof light has an incandescent lamp and is available in five lens colors - amber, blue, clear, green and red.
- Available in 24VDC and 120VAC
- Five lens colors
- 3/4- inch pendant mount standard; other options available
- Optional dome guard
- Type 4X, IP66 enclosure
- UL and cUL Listed, CSA Certified, Marine Rated |
|
Federal Signal's Electraflash® Model 141 is an economical incandescent flashing light. The Electraflash is less than six inches high and six inches in diameter. It is available in five impact- resistant fresnel dome colors: amber, blue, clear, green and red. The 120VAC model is UL Listed and CSA Certified.
- Available in 12VDC, 24VDC, 36VDC and 120VAC
- Five dome colors
- Surface mount or integrated 1/2- inch pipe mount
- Type 3R enclosure
- UL Listed, CSA Certified |
|
Federal Signal's Model 191X hazardous location steady burning light is rated for operation with any voltage from 24 to 250VAC or VDC and designed for hazardous locations where a visual signal is needed.
- 24- 250 VAC/VDC
- Six tempered glass dome colors
- Uses standard A- 19 incandescent lamp (40W- 100W)
- 3/4- inch pipe mount
- Dome Guard included
- Indoor/outdoor use
- Type 4X, IP66 enclosure
- UL and cUL Listed, CSA Certified |
|
Federal Signal's brightest and most compact strobe light, the Fireball® emits a powerful "lightning bolt" flash of light. Approximately five inches tall and four inches in diameter and rated at 300 effective candlepower, the Fireball is an economical solution to a wide variety of stationary and vehicular warning requirements. The Fireball is available in 12- 24VDC, 24VDC, 120VAC and 240VAC. All models are UL Listed and CSA Certified. The FB2PST is available in six colors - amber, blue, clear, green, magenta, and red.
- Available in 12- 24VDC, 120VAC and 240VAC
- Six dome colors
- 10,000 hour strobe tube
- Integrated 1/2" pipe and surface mount
- Indoor/outdoor use
- Type 4X, IP66 enclosure
- UL and cUL Listed, CSA Certified |
|
Intrinsically safe SHL 100-Ex hand lamp
Rugged and functional, the SHL 100-Ex Handlamp has been specifically designed for use in industrial environments with potentially explosive areas (Zone 1) in accordance with Directive 1999/92/EC (ATEX 137).
The SHL 100-Ex has many useful features for a wide variety of applications.
|
|
| The new 2620 headlamp provides light to the user who is able to work, hike, bike or play with free hands. It comes with a rubber strap for helmets (to avoid slippery) and a cloth strap for a head or hat. Among other features, it has an ABS resin body, a multi-angle pivoting head and is water resistant. It combines two different levels of light, using 3 LEDs for short distances with long burn time or a extremely powerful Xenon lamp for long distances. It is certified by ATEX and unconditionally Guaranteed ... forever. |
|
The P861 LED Lamp provides visual on/off indication of process conditions in both safe and hazardous areas. Available in a choice of six super-bright colours (red, orange, yellow, green, blue and white), they are ideally suited as part of a panel mounting indicator or illuminated pushbutton assembly.
The P861 itself is a standard BA9s intrinsically safe LED lamp which can be supplied as part of a pilot light or illuminated pushbutton or alternatively supplied separately to be used in any standard switch or lamp assembly.
With the LED lamp being current limited to take a maximum of only 20 mA, it is possible to drive two lamps from a single IIC interface without any affect on the brightness.
With the LED's low power consumption, low heat dissipation and long life expectancy, the P861 is an ideal indicator for safe and hazardous areas alike. |
|
Waldmann ESD-luminaires smooth discharge protects valuable components.
Waldmann ESD-luminaires are designed and manufactured using methods that eliminate an electrostatic build-up and controls discharge. Plastics present a significant danger. They are insulators and cannot normally conduct electricity.
The use of special plastics has made it possible to reach the necessary discharge ability for electrostatic charges. It is not recommended to equip the luminaires with any conductive materials, especially metal. An electrostatic build-up is conducted through metal at high speed, and this dramatically increases the risk of a harmful spark discharge.
The grounding of the luminaire components is equally as important as the use of anti-static materials. Without a functional ground, the use of the best materials is ineffective.
All Waldmann ESD-luminaires have been ap-proved by the internationally respected Swedish institution SP. A copy of the certificate is available upon re-quest from Waldmann.
The housing, the magnifier frame and the joints of the Waldmann luminaires are molded from special plastics. All steel and aluminium parts are specially treated to ensure a controlled electrostatic discharge.
|
|
Intrinsically-Safe LED – Headlamp Lite-Ex KL 10
The Lite-Ex KL 10 is an extremely light and very bright LED headlamp for use in ex-areas. Certified for use in areas classified as zone 1 and 21 in accordance with norm 1999/92/EG (ATEX137). |
|
Intrinsically-Safe Inspection Lamp ISL 200 / 400-Ex
The ISL 200-Ex and the ISL 400-Ex are robust, cable-connected inspection lamps for industrial use in explosion-prone areas for zones 1 and 21 according to norm 1999/92/EG (ATEX 137). The inspection lamps are especially notable for their bright and extremely long-lasting illuminants. |
|
1 D-Cell PFD light. USCG Approval 161.012/11/0. Requires three year dated battery. Orange body.
|
|
LP330FB. Blue LED/XENON headlamp. Ultra-compact and light weight. Water-resistant. 4 positions switch: off, 1 LED, 3 LED, Xenon. Adjustable inclination (up-down 90°C). Adjustable head-straps system. Can be mounting on a helmet with a set of head-strap clips (not included). Use 3 x 1.5V "AAA " size battery (included). Delivered in strong blister. HEADGUARD brand.
|
|
Intrinsically Safe Handlamp type SHL 300-Ex
The SHL 300-Ex is a robust Handlamp specifically designed for industrial environments and the firefighting services. Certified for use in potentially explosive areas of Zones 20 and 1 or 20 and 21 in accordance with Directive 1999/92/EC (ATEX 137), this Handlamp boasts a number of innovative functions that maximise the use and ease of operation.
• Zone 0 and 20 certified
• approx. 10000 Lux illumination power – generated by 3 high-power LEDs
• LED service life of approx. 100.000 h
• Robust, anti-static housing – rated to IP 65
• Pivoting head
• Optimum distribution of weight – ergonomic and comfortable to carry
• Battery capacity display – 5 section indicator
• Emergency light function with high brightness
• Flash mode |
|
Service life of 50,000 hours (at a luminous-flux reduction to approx. 70%).
Hard-coated aluminium housing for improved wear and corrosion protection.
Protection from electrostatic charge and polarity reversal.
Choose between spot or area light.
Special lens holder for maximum luminance.
Insensitive to vibration and temperature changes.
|
|
Custom made EL lamps are the ideal solution for lighting purposes when space is limited. They can be manufactured in almost any size and shape. Multi addressable lit areas are possible. The working principle is a solid state phenomenon that uses phosphors, not heat, to generate light.
The lamps are typically driven by a DC/AC inverter, generating the necessary AC voltage. Special versions are available that can be fed directly from mains (220V/50Hz)
Advantages
•Slim-line electroluminescent flexible foil lamps
•Thin (0.2-0.4 mm), light weight, uniform light source
•Low tooling cost and unit price
•Possible uses: backlighting of facias, keyboards, LCD’s, emergency exit signs, dashboards, control room applications, floor/wall lamps in aircraft and underground passages, …
|
|
Light Lucyfer "Young", planned for a refill of the traditional type (not with induction, but by the introduction of a connector).
The refill is possible with the network (charger 230V a.c.) or the battery of the vehicle (charger 12V D.C.) Available also a charger for vehicles with system to 24V. |
|
Power
12V DC operation, 5W nominal power
Features
- Detachable tube
- Over-Temperature Protection
- Extremely high illumination efficiency
- High number of switching cycles
- Standard E27 lamp socket
Wiring
Pre-wired 7.5 m with switch and DC plug to triple DC socket |
|
A mini light of pocket...
- always available
- always charged
It is composed of a base connected on the network 220 V and of an extractable light provided with a switch (EE 960).
A new function of lighting of the table
Of modular form, this emergency lamp is always available in the switch-gears:
- in the event of power cut, it ignites automatically and can be withdrawn from its base
- separated from its base, it acts as mini-light of pocket of an autonomy of 1:30. |
|
Range : APOLO 3000
Height: 5,4 m
Nº projectors: 6
Power: 3000 wat
Genset power: 5,5 kVA
Cool system: Air
Fuel: Diesel
Application: Isolated places, Road works, Public works, Civil protection, Natural disasters, Representations, Demonstration, Cultural activities, Sports and endless...
Range : APOLO 8000
Height: 8,9 m
Nº projectors: 6
Power: 9000 wat
Genset power: 12,1 - 31 kVA
Cool system: Water
Fuel: Diesel
Application: Isolated places, Road works, Public works, Civil protection, Natural disasters, Representations, Demonstration, Cultural activities, Sports and endless...
Range : APOLO 9000
Height: 9,4 m
Nº projectors: 6
Power: 2400 wat
Genset power: 12,5 - 30 kVA
Cool system: Air - Water
Fuel: Diesel
Application: Isolated places, Road works, Public works, Civil protection, Natural disasters, Representations, Demonstration, Cultural activities, Sports and endless...
|
|
We have at your disposal 6 kinds of High-frequency lighting towers:
with or without generator!
Compact, super silent, well-lighted but glare-free, they will illuminate your construction sites, your sports meeting or various events. |
|
| Heavy-duty, trailer-mounted light towers feature a compact and narrow body design for easy transport - two abreast a on flatbed truck. Distinctive elliptical light fixtures allow light to travel directly to the work area for brighter illumination. Each light can be individually adjusted without tools and a quick disconnect power cord allows for easy removal prior to transport. The 360-degree rotating mast allows for light adjustment while raised. |
|
T8 to T5 Adapter is a kind of lighting fixture which includes built-in electronic ballast, T5 tube and fixture. It is a new innovation energy-saving way.
Built-in electronic ballast
High energy-saving
CE, EMC listed
Excellent performance in brightness and lighting
To replace T8 tube, T8 recessed lights
Without flicker, without noise |
|
RP-Bar
Key Specifications:
-Wattage:1/2/5/9W
-Color: White/ Warm white/ Cold white/ Changeable color
-Lumen:30/90/120/250
-Voltage: DC24V
-Color Temperature: 2700-3500K/5000-7000K/7000-9000K
-Length: 0.1M /0.2M /0.5M /1M |
|
Federal Signal introduces the SemiStat® Status Indicator. Designed to meet the needs of the OEM market, the SemiStat is an attractive, easy-to-install and economical status indicator.
- Available in 24VAC/VDC
- Tri- or quad-color models
- Available in chrome (model SCC) or white (model SCB) finish
- 100,000 hour vibration resistant LED lamps
- Integrated sounder
- Surface mount
- Indoor use only |
|
| ... products without technical information |
| |
|
|
