Smart expansion module for one stepper motor axis with integrated amplifier for 2-phase stepper motors.
Distinctive ...
The JetMove 100 series has especially been developed for the voltage range from 12 to 48 VDC (up to 384 W). The servo amplifier JetMove 108 can run motors ...
- Mini step and micro step power stage for bipolar control of 2-phase stepper motors
- Phase currents up to 9 APEAK / 24 to 70 VDC
- Parameterisation via ...
Linear Stepper Motor Power Stage with Variable Current Profile
SINCOS is a linear stepper motor power stage particularly developed for applications which require high step resolution, such as: measuring ...
- Plug-in stepper motor power stage for bipolar control of 2-phase stepper motors
- Phase currents up to 3.5 APEAK
- Supply voltage 24 to 48 VDC
- Status LED
- ...
Giga-tronics GT-1000A Microwave Power Amplifier - 2 to 20 GHz
Overview
The Giga-tronics GT-1000A Microwave Power Amplifier offers linear high-power amplification across multioctive bandwidths. Ideal for testing in EMC, wireless communications applications, ...
Giga-tronics GT-1020A Microwave Power Amplifier - 100 MHz to 20 GHz
Overview
The Giga-tronics GT-1020A Microwave Power Amplifier incorporates broadband MMIC-based architecture. These state-of-the-art amplifiers are based on solid-state parallel MMIC ...
Giga-tronics GT-1040A Microwave Power Amplifier - 10 MHz to 40 GHz
Overview
The Giga-tronics GT-1040A Microwave Power Amplifier incorporates broadband MMIC-based architecture. These state-of-the-art amplifiers are based on solid-state parallel MMIC ...
Our aim is to take the latest technology available to help our customers complete their measurements faster but without loss of precision. With the Nor280 we have again met this objective.This power amplifier is the 4th generation of specially designed units for building acoustic measurements from Norsonic. It is ...
Norsonic offers a broad range of 1/2" and 1/4" preamplifiers.
Features
...
This half-inch preamplifier is designed for calibration purposes using the insert voltage technique. The insert voltage technique is used for determine the open circuit voltage of a microphone cartridge. It is delivered with an integral ...
4100-SC, ± 2.0% Linearity, without Meter
The Basic Single channel capacitance Amplifier module is more cost effective as a stand-alone module than the standard rack and amplifier approach. The new unit has the same performance as the standard 4000 Amplifier Series but includes a built in clock/driver card embedded in a rugged aluminum enclosure. The standard ...
Triple Channel Electronics
The triple channel semi portable non-contact capacitive instrumentation package is called the Gapmaster3. The instrumentation package contains the following features and benefits:
- The Gapmaster3 contains three channels of electronics, the equivalent of ...
Capacitec has announced the launch of the model 410-XSC, a new family of single channel, stand-alone capacitance amplifiers with superior stability, resolution, signal-to-noise ratio and bandwidth in a standard OEM package.
Measuring just 55 x 100 x 12.7mm (2.2 x 3.9 x 0.50 in.), the compact Capacitec model 410-XSC amplifier is designed to be compatible with ...
- Operation mode and max sensing range:
Thru-beam: 0-70 m
Diffuse proximity: 0-5 m
- 24 V ac/dc supply voltage
- ...
MPA - MULTIPLEXED PHOTOELECTRIC AMPLIFIER SERIES
The MPA series is a range of multi channel, multiplexed photoelectric amplifiers, which are to be used in conjunction with a relevant number of sets of remote transmitters LT and receivers LR, from the ...
The Photoelectric Amplifier series consists of a wide selection of single channel photoelectric amplifers which are to be used in conjunction with Telco's line of remote photoelectric sensors, that may be used in thru beam or diffuse proximity. A selection of the amplifiers provide ...
Order Code Z-SG
Input: analog sensor (strain gauge load cell); digital (weighting)
Output: current, 0..20 / 4..20 mA; voltage, 0..5 / 0..10 V
Precision: 0.01%
Output via:
- analog signal (0/4..20mA, 0/2..10V, ...
Analog converters:
Z-SG: Strain gauge to DC isolator / converter
Z102: Potentiometric to DC isolator / converter
Z109REG: Universal ...
ZC-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique ...
DAQP/HSI-signal amplifier: galvanically isolated signal amplifier with up to 2 MHz bandwidth
DAQP/HSI-signal amplifiers ...
CPAD2/EPAD2: galvanically separated signal amplifiers for static measurement
The galvanically separated CPAD2/EPAD2 signal amplifier is used for slow measurements in rough environments (e.g. engine ...
EGE's new amplifier for EGE flow controllers is especially easy to operate: one touch of a button is sufficient to adjust the sensor to the medium. The setup process is then finished ...
The Ex-amplifier SS 400 Ex serves to evaluate EGE flow sensors for areas with possible gas and dust explosions according to ATEX. It is classified as category 2 equipment and can be installed and operated in zones 1 or 21. Therefore, the connected flow ...
Signal conditioning amp for single or multiple load cell applications
Simple one pass auto calibration
Excitation 10V 160mA for up to 6 load cells
Sensitivity ...
The ICA group of miniature load cell signal conditioners, offer a high performance strain gauge amplifier in miniature format, designed specifically for fitting inside load cells, converting a standard load cell to a volt or mA output. The ICA group offers high stability ...
Input sensivity 01 to 5 mV/V
Programmable via RS232 interface
Analog ...
Input sensitivity (0,1 mV/V up to 4 mV/V)
selectable by DIP-switches
Connection of max. 4 resistance strain
gauge ...
The Diaphragm Amplifier is a miniature interface device that performs the same function as a piloted 3-way valve, but with low outlet flow rates. ...
Remote Amplifier
Remote amplifier photoelectrics use two components: the amplifier, which can be programmed and does the processing; and the remote sensor head, which is small enough to fit into small places and can be installed away from the amplifier.
MICRO-AMP Series
- Amplifiers for use with specific remote ...
The S7 series offers optic amplifiers with slim 10mm body, representing the ideal solution for all applications requiring high-accurate sensing combined with ...
The Strain Gauge Amplifier SGA-2 is designed as a differential front-end amplifier to connect full, half or ¼ bridge strain gauges with ...
