- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Pneumatic nozzle
Pneumatic nozzles
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Orifice diameter: 1, 0.25 in
Flow: 57, 22, 4.5 ft³/min
Model 1008SS Back Blow Air Nozzle EXAIR's Back Blow Air Nozzles are engineered to clean inside of pipe, tube, hose or channel. An array of holes provide a forceful 360 ...
Orifice diameter: 0.13, 0.25 in
Flow: 0.4 us gal/h - 1.9 us gal/h
Pressure: 0.7 bar - 4.1 bar
... construction Compact Versatile Interchangeable liquid and air caps Minimizes air consumption Fine atomization Type 303 Stainless Steel - All of EXAIR's Atomizing Nozzles ...
Orifice diameter: 0.13, 0.5, 0.25 in
Flow: 0.5 us gal/h - 68.3 us gal/h
Pressure: 0.7 bar - 5.5 bar
... construction Compact Versatile Interchangeable liquid and air caps Minimizes air consumption Fine atomization Type 303 Stainless Steel - All of EXAIR's Atomizing Nozzles ...
Orifice diameter: 0.51 mm
Pressure: 6.8 bar - 89.6 bar
Media temperature: 70 °C - 205 °C
Patented Allegro nozzles use a novel air-assisted contact coating technology to apply hot melt adhesives to single or multiple elastic strands in nonwoven disposable hygiene article manufacturing. This advanced nozzle ...
Flow: 8 l/min - 64 l/min
Pressure: 35 bar - 150 bar
Media temperature: 0 °C - 90 °C
... MOTORIZATION - ELECTRIC & PNEUMATIC PIPE LENGTH * [L] AND WEIGHT [KG] ELECTRIC VERSION - 500 mm > 7.3 Kg 700 mm > 8.9 Kg 1000 mm > 10.5 Kg 1500 mm > 12.1 Kg 2000 mm > 16.9 Kg PIPE LENGTH * [L] AND WEIGHT [KG] ...
Orifice diameter: 0.5 in
Flow: 34 l/h - 350 l/h
Pressure: 0.4 bar - 4 bar
WIDE ANGLE ROUND SPRAY Larger capacities atomizers shown in these pages work on pressure liquid feed and internal and external mix principles. A wide angle hollow cone spray is also available. Approximate jet dimensions are given in ...
Orifice diameter: 0.13 in
Flow: 0.1 l/min - 2.87 l/min
Pressure: 0.5 bar - 6 bar
Ultrasonic atomizers produce the finest sprays available with air assistance for industrial processes, with a narrow angle full cone jet.Water and air do not mix in a confined volume before leaving the ...
Orifice diameter: 10 mm
Flow: 3.4 m³/h - 59.5 m³/h
Pressure: 80 psi - 100 psi
... filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity, ...
Pressure: 0 bar - 10 bar
Media temperature: 0 °C - 70 °C
... and holes around the Laval orifice that generates a quiet, powerful and laminar air flow. This nozzle provides extremely efficient blowing that utilizes your compressed air ...
Pressure: 0 bar - 10 bar
Media temperature: 0 °C - 400 °C
SILVENT MJ4: micro-nozzle of stainless steel with central hole surrounded by slots. Generates a concentrated air stream while limiting both noise level and air consumption to a minimum. ...
Pressure: 0 bar - 10 bar
Media temperature: 0 °C - 400 °C
... comparison with "open pipe blowing". Technical data Blowing force (N) - 3.2 Air consumption (Nm³/h) - 19 Sound level (dB(A)) - 81 Nozzle technology - Slot Material (nozzle) - ...
Orifice diameter: 0.15 mm - 1.55 mm
Flow: 0.1 l/min - 113.7 l/min
Pressure: 280 bar
... designed to suit most AAA spray guns in the market. The device reduces bounce and blow back with optimum atomization. Small tip sizes can be selected for best results without fear of blockages. Superior finishes can ...
EXITFLEX
Orifice diameter: 0.01 in - 0.06 in
Flow: 0.09 l/min - 11 l/min
The 63-611, manufactured by Exitflex, is an air assisted airless tips that integrates high-quality tungsten carbide inserts. It is capable of providing optimum erosion resistance in all situations. Even ...
EXITFLEX
Orifice diameter: 0.01 in - 0.02 in
Flow: 0.18 l/min - 1.3 l/min
The 63-613, manufactured by Exitflex, is a FINE FINISH air assisted airless tips that integrates a main insert and a pre-atomizer made out of high-quality tungsten carbide grade. It is capable of providing ...
EXITFLEX
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
... the air intake can be adjusted with the choke valve on the pneumatic hose. Function: The fluid hose is laid into a pressure-free tank. The atomizer should always be fixed a little above the maximum ...
... automatic sprayer operates similar to windshield wipers on a car. The actuation by hand or foot resp. is taken over by a pneumatic cylinder squeezing a rubber bellows. This cylinder is controllable via a 3/2-way valve. ...
Orifice diameter: 0.2 mm - 1.6 mm
Low Flow Rate Fine Fog Nozzles/ Flat Spray BIMV series Features • Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). • ...
H. IKEUCHI & CO., LTD.
... of "fine fog" with smaller air consumption. • Large turn-down ratio. • Spray angle of 20゚ or 60゚. *1) Measured at compressed air pressure of 0.2–0.5 MPa and liquid pressure of 0.2–0.5 ...
H. IKEUCHI & CO., LTD.
... cone spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). • Features large turn-down ratio under liquid pressures of 0.1–0.3MPa. • Spray angle of 60゚. *1) ...
H. IKEUCHI & CO., LTD.
... angle varies with air pressure and flow. Separate metering device, such as orifice, metering pump or valve required. Large flow passages greatly reduce clogging. CONSTRUCTION AND MATERIALS Three part construction: ...
DELAVAN France
Spray Characteristics The Delavan AL air atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation. Unlike hydraulic or pressurized nozzles ...
DELAVAN France
The AL 15 series is a pressure-fed external mix flat fan spray nozzle The external mix feature allows control of the atomization without changing liquid flow. The lighter the air pressure, the higher ...
DELAVAN France
... SPRAY NOZZLES - AIR ATOMISING The AL 30 series produces a wide, round spray pattern with a nominal angle of 70°. This is an internal mix nozzle, where a change in air ...
DELAVAN SPRAY TECHNOLOGIES
... Spray angle varies with air pressure and flow. Separate metering device, such as orifice, metering pump or valve required. Large flow passages greatly reduce clogging. CONSTRUCTION AND MATERIALS Three part construction: ...
DELAVAN SPRAY TECHNOLOGIES
DELAVAN SPRAY TECHNOLOGIES
Orifice diameter: 0.4, 0.5 mm
Particularly fine flat fan atomization with air or gas. Pressure principle. Internal mixing of fluids. Applications: Web dampening, cooling, humidification of goods.
Orifice diameter: 0.4 mm - 1.5 mm
Version with magnetic valve. Particularly fine flat fan atomization with air or gas. Siphon principle. Internal mixing of fluids. Applications: Web dampening, cooling, humidifi cation of goods.
Orifice diameter: 0.4 mm - 2.5 mm
Version with magnetic valve. Fine flat fan atomization with the aid of air or gas. Liquid pressure principle. External mixing of fluids. Applications: Web dampening, cooling, humidification of goods, atomization of ...
Orifice diameter: 3, 8, 5 mm
Pressure: 0 bar - 600 bar
Media temperature: 400 °C
... machine needle shut-off nozzles type HP are used in processing of thermoplastics, principally with low viscosity materials such as: PA, PPS, PE, POM,PP. In this nozzle’s favour are: Cycle time reduction, ...
Herzog AG
Orifice diameter: 3, 7.5 mm
Flow: 2,000 l/min - 3,000 l/min
Pressure: 10 bar
Valve gate nozzle type 8NEST Single nozzle with conventional heating element Operating voltage 230 VAC Volt Alternating Current - Wechselstrom Available nozzle lengths (mm) ...
Orifice diameter: 5 mm
Flow: 2,000 l/min - 3,000 l/min
Pressure: 10 bar
... stress limit of the pneumatic valves, a separate air cooler is to be installed. Pneumatic hose inner dia. Operating voltage 230 VAC Volt Alternating Current - Wechselstrom Available ...
Flow: 48.3 l/min - 90.4 l/min
Pressure: 1.8 bar - 2.5 bar
... and product Ra ≤ 0.8 μm FDA conform Optional ATEX exempt Applications Due to its equipped spray head that is pneumatically actuated and pushed out and pulled-in after the cleaning cycle by spring, ...
... point quality Leading in drive technology, various drive unit versions Tip insert versions 1Permanent valve pin guide Valve pin guide in the front area of the nozzle for maximum operational ...
Flow: 1.5 us gal/h - 7.4 us gal/h
Pressure: 40, 10, 30, 20, 60 psi
... -Fed Pneumatic Spray Nozzles DESIGN FEATURES Deflected flat fan spray pattern HOW SPRAY PATTERN IS ACHIEVED In a pressure-fed system, the liquid is supplied under pressure to either internal ...
BETE
... capacities and anti-bearding air caps that resist build-up around the nozzle orifice. *Automatic air atomizing nozzles provide precise intermittent spraying. ...
... easy and safe to use. The 272 includes a pneumatic foot pedal which allows the operator to regulate both the flow of air and activate the ionisation hands free.
Orifice diameter: 0.5 mm - 2.8 mm
... ABC) Optimal homogenous and reproducible spray results Design with only seven individual parts and O rings Pneumatic up/down control with cleaning needle Simple installation/de-installation for cleaning ...
The JPG Series of Air Cup, manufactured by BEx, is specifically designed to produce a round spray platform. The fluid is fed and internally mixed. Moreover, the nozzle selection is available for other parameters.
Orifice diameter: 0.5 mm
Super Cleanliness - Process reliability - Kind of Compatible The pneumatically actuated spray nozzle SPK1 can be retrofitted with any of our proven Metering Valves AXDV-C1 and -C2 as well as Outlet Valve ...
... metal won’t be stuck onto the nozzle. Additionally, Boron Nitride ceramic is a kind of refractory ceramic with low expansion and high thermal conductivity. These features make it to be an ideal choice for atomizing nozzles. ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining