|
|
|
|
|
|
The BRMX rotary paddle bin level indicator provides reliable point level detection and measurement of dry bulk solids in bins, tanks, silos, hoppers and conveyors for materials including grain, feed, plastic pellets, cement and aggregates. Mounted on the top or side of a bin, the BinMaster BMRX alerts operators when bins are full without the rigors and risks associated with climbing and continuously checking bins levels. When material is not in contact with the paddle, the paddle rotates freely. When the paddle comes into contact with dry bulk material, the paddle stops rotating and sends a signal – normally through the use of a horn or light – to alert that the bin is full.
The BinMaster BMRX features “de-energized” operation of the motor which shuts the motor down when materials is present, versus competitive rotaries which put the motor in a "stalled" condition. Power is not consumed until the bin is emptied and the drive shaft again begins to rotate – which saves on energy costs and prolongs motor life. It offers a fail-safe alert providing notification when power to the unit is lost. The BMRX rotary design includes a screw-top enclosure for easy access to motorized parts. It is CE approved and is appropriate for use in hazardous conditions when explosion proof protection is needed – featuring Class I, Groups C and D, Class II E, F, and G listings.
BinMaster also offers the Maxima+, an advanced rotary level indicator that offers genuine fail-safe protection via an LED indicator that alerts to the failure of power, the motor or electronics. For smaller bins and hoppers, the Mini-Rotary is an economical, compact rotary level control.
|
|
These are used for the maximum and minimum level in silos
and mill hopper which contain powder or grain material
which can be cereals, plastic material, sand etc.
In the “RL-A” series the paddle turns at low speed which
when in contact with material stops turning causing a contact
to switch.
In the “SM 85” series the functioning is caused by material
pressing on a rubber membrane which causes a micro switch
positioned internally to operate.
- “RL-A” series with body and paddle in plastic material,
shaft and rope extensions in stainless steel ,
- Supply voltage: 24Vdc o 24/ 48Vac o 110/220Vac.
- Extensions lengths for “RL-A “ series available :
Shaft : 500 / 1000 mm
Rope : 2000 mm
- SM-85 series with aluminium alloy casting flange, plastic
body and neoprene membrane
- Electrical contacts:
2A a 250 Vac for “RL-A” series .
6A a 250 Vca for “SM-85” series .
|
|
SITRANS LPS200 is a rotary paddle switch for point level detection
in bulk solids. The paddle switch technology detects full, empty or demand
conditions on materials such as grain, feed, cement, plastic
granulate and wood chips. The paddle switch can handle bulk
densities as low as 15 g/l (2.19 lb/ft3) with the optional hinged
vane or 100 g/l (6.25 lb/ft3) with the standard measuring vane.
A low revolution geared motor with slip clutch drives a rotating
measuring vane which senses the presence of material at the
mounted level of the LPS200. As material comes into contact
with the rotating paddle, rotation stops, which changes the microswitch
state. When the paddle is no longer covered by material,
rotation resumes and the relay reverts to its normal condition.
|
|
ILT-type Bin Level Indicators have been designed for electric signalling by rotary action of minimum or maximum material level inside bins, hoppers or silos.
- 24 V (AC), 50-60 Hz
- 48 V (AC), 50-60 Hz
- 110 V (AC), 50-60 Hz
- 230 V (AC), 50-60 Hz
- 24 V (DC)
- Standard connection: 1½"
- ATEX-certified, zone 20 / 21
- Easy to install
- Cost-effective
|
|
DF Rotary blade level indicators
The level limit switches type DF can, as occasion demands, be used as full, empty or demand indicator for all bulk goods or sludges and pastes.
Due to the numerous and manifold possibilities of variation, the MOLLET rotary blade level indicators can be used and adapted to every special task however.
The rotary blade level indicators are observing the filling level in silos, containers, weighers, discharge pipes etc. and they are excellently qualified for use in dusty, powdery, granulated and grained bulk goods as well as in granular bulk materials.
|
|
|
|
|
|
The Ramsey RT Series Rotary Level Control from Thermo is designed for point level monitoring of solids in bins, vessels and chutes. The RT can eliminate spills, material waste and down time by preventing bin overflows, detecting plugged chutes and empty bins. It works equally well in plastics, food, chemicals, raw ores, aggregates or other solid materials.
Product Detail
Point Level Monitoring of Solids in Bins, Vessels and Chutes
The design of the Ramsey RT Rotary Level Control eliminates the most common causes of rotary control failures. Its de-energizing motor shuts off when material is present, rather than entering a stalled condition.
Features & Benefits
Simple, rugged construction using fewer parts for more reliable operation
De-energizing motor for extended motor life
Three bearings for greater shaft support and dependability
Dust-tight, die-cast aluminum housing
Model RTX is UL Listed and CSA Certified for NEC Class II, Div. 1 & 2, Groups E, F & G
Choice of 316 stainless steel paddle styles and sizes
|
|
The new rotary pallet detector VEGAPAL RN 3000 is adapted perfectly to the detection of level of the pulverulent or granulous solids starting from a density of 15 kg/m3.
Its very robust design with metal case IP66 and three stages of sealing make a detector made of it to last in contact with your process. It profits in fact of a 3 years guarantee.
Its implementation is very simple: unspecified position of assembly, rotary case for correct orientation of the EP, without adjustment, maintenance.
The exit signal is carried out on a free contact of potential 250 VAC/2A/500W. The power supply exists into 230,115,48 or 24VAC and 24 VDC. A version ATEX II ½ D for explosive zones 20 dust is available.
The typical applications are safety antidébordement and protection against the idle run on products such as cereals, flours, starch, dried milk, sweetens, sand, cement, granulated plastics, etc...
|
|
|
|
|
|
ITECA SOCADEI manufactures rotative paddle detectors for level detection in any solid bulk silos or hoppers etc ... Their casing in cast aluminium make them robust and reliable.
Besides they can meet any demand with a wide range of accessories (paddle extension, tube extension for high temperature up to 500°C - 930°F and adapted to insulated hoppers, steel frame for horizontal mounting and different paddles).
For security level, is strongly advises to add a control module type BTR 111 to get positive security and reinforce information.
Our strong experience in bulk solid market enables us to propose you the most adapted solution for your application. Please do not hesitate to contact us.
Technical data:
---------------------
Measurement range: Installation position horizontal or vertical
Operating pressure: -0.5...+1.8 bar
Conditions of materials to be measured: Solids weight 80 g/l
Material temperature: until 80 °C(176°F)
Material grain size: Up to 50 mm
Ambient temperature: until +60 °C
Ingress protection : P 65
Power supply: 110/220 VAC, 24/48 VAC or 24 VDC
In option:
------------
Material temperature: until 500°C (930°F)
ATEX 20
Lengthens
Protective Attaches
Adjustment for hopper insulated
|
|
| ... products without technical information |
| |
|
|
