Sleeves

Diameter: 12.5 mm - 60 mm
Temperature: -18 °C - 80 °C

Flexible, Nonmetallic Liquid Tight Electrical Conduit FEATURES - Smooth inside for easier wire pulling; no hazardous sharp edges or burrs; will not damage conductors. - Lightweight and lower installed cost. - Integral ...

Temperature range - -15 °C - 70 °C Material - galvanized steel, Tube cover PVC, Surface corrugated

Diameter: 5 mm - 25 mm

Traditional hydraulic hoses have a rubber cover which has a spiral imprint in the surface left over from the vulcanisation process. This is typically referred to as a “wrapped cover”, introduced in the early 1990’s it has, over many decades ...

Diameter: 8 mm - 90 mm
Temperature: -20 °C - 90 °C

The EW cable protection conduits are made of specially modified polyethylene.The material is halogen, phosphor and cadmium-free.The EW cable protection conduits are characterised by excellent flexibility and good flexural fatigue strength.Applications:Light ...

Diameter: 7 mm - 53 mm
Temperature: -40 °C - 70 °C

Material: PE-LD fire classification HB acc. to UL94, free of halogene and phosphorus, resistant to UV Colour: black Temperature range: -40 °C to 70 °C

Diameter: 0 in - 5 in
Temperature: -75 °C - 260 °C

Our FIT heat-shrink tubing offers a reliable way to protect and seal terminations or add additional mechanical ruggedness. FIT preferred heatshrink products are made from premium compounds under the tightest manufacturing controls. This ...

Diameter: 0.5 mm - 25 mm
Temperature: 250 °C

Fibreglass braided sleeving, with aluminised silicone rubber coating, class C, 3KV Applications : Car industry Electromechanics Operating temperature : 250 °C Insulation : Synthetic or mineral fiber (continuous filamant) Halogen-free

Diameter: 9 mm - 120 mm
Temperature: -35 °C - 60 °C

Opening tubings with zipper systems are available from Ø9 mm to Ø120 mm. They are supplied flat, rolled up on drums, in 50 m standard length, or any specific length you may require.

Diameter: 0 mm - 4 mm
Temperature: -55 °C - 110 °C

Thick Wall Heat Shrink provides excellent protection above or below ground level and is suitable for wet locations and direct burial (UL486D)

Diameter: 1.2 mm - 2.1 mm
Temperature: -40 °F - 194 °F

Part Number: NHSBG Description: Burst Guard Nylon Hose Sleeve from Tompkins is an ultra-dense, two-layer sleeve that is three-times the density of standard sleeve. It controls hose ...

Diameter: 13 mm - 54 mm
Temperature: -40 °C - 120 °C

Material: Polyamide (Nylon) 6 Applications: Buildings (No fire risk), Machine Tools IP Ratings: IP40, IP66, IP67, IP68

Length: 12 m - 120 m

... Flat covers have keyhole screw slots Straight sections are offered with/without adequate concentric knockouts (1/2", 3/4" conduit size) Unobstructed interior speeds up laying of cables Optional hanger brackets allow ...

Diameter: 0.5 in - 4 in
Temperature: -20 °C - 150 °C
Length: 300 mm - 10,000 mm

... 1'' in stainless steel from 1 1/4'' to 4'' in galvanised steel. Revolving joints in galvanized steel. Spiralled flexible conduit in stainless steel. All the range is available in stainless steel (code with S rather than ...

Temperature: -55 °C - 135 °C

Diameter: 21.5 mm
Length: 2.3 m

Avoid being limited by worn out hose packages. We offer you hose packages that are easy to install, lasts long and provide a good protection of your hoses and cables. Combine our hose package with a Swivel or Swivel tool changer and you ...

Our PTFE Heat shrink tubing is milky white in colour. In addition we are also able to produce coloured PTFE Heat shrink tubings according to Pantone references. PTFE Heat shrink tubings of ElringKlinger Engineered Plastics have standard ...

Diameter: 1.5 mm - 26 mm

◆ Material: made from PE. ◆ Usage: fix one end with safety belt first, then circle the wires clockwise to make them tighen. ◆ Application: a protection wear for electric wires, and make them insulation and look nice.

Diameter: 25, 32, 38, 50, 20 mm

Round conduit made from super high impact self-extinguishing PVC-U. Light or heavy gauge options available Available in black and white Meet requirements for BS 4607, BS EN 61386-1: 2008+A1:2019, BS EN 61386-21:2021+A11:2021 and ...

Diameter: 89 mm - 214 mm

SLVWRS Sleeves are accessories and complements to WRS frames. Useful tools to secure passages and mount frames according to customer needs, they come in different sizes and materials to fit any WRS size. SLVWRS Sleeves ...

For PTFE heat shrink tubing we provide standard shrink ratios of 2:1 and 4:1. Larger ratios are technically possible, but not standard and custom made. The shrink ratio for FEP heat shrink tubing is lower, on average 1.3:1 up to 1.6:1. ...

WEITKOWITZ performs a wide range of heat-shrink tubing of polyolefin with a shrink ratio of 2: 1 or 3: 1.Our shrink tubings are normally flame-retardant and self-extinguishing.Our selection retained shrink tubings with and without adhesive ...

Temperature: -30 °C - 125 °C

Tubes, Heat shrinking tubes materials: polyolefine Jacket Colour: RAL 9005 jet black

Diameter: 7 mm - 56 mm
Temperature: 105 °C

BCTS polyamide terminal sleeve for corrugate conduit Material Plastic Material quality Polyamide (PA)

Diameter: 19 mm - 800 mm

100 % high tenacity synthetic polyester yarn, circular woven in twill weave alternatively plain weave, warp and weft threads multiple twisted (on request with woven copper wires) standard colour: white plain; others on request ...

• Steel double barrel crimp sleeves 8 shaped. • Secures cables of 0.098’’, 0.126’’, 0.157’’, 0.197’’, 0.236’’. • Other sizes are available on request.