|
|
| Infrared cameras PYROVIEW 380L compact mounted in weatherproof housings and in potential combination with pan-tilt-systems will enable you the continuous monitoring of outdoor areas, storages or production halls. The uncooled infrared cameras PYROVIEW will ensure long-term stability and a favourable system price. |
|
For non-contact measuring and imaging of the temperature distribution on objects, IMPAC offers fixed line cameras and thermal imagers.
Line cameras are fixed cameras for industrial use. Depending on the model, the uncooled microbolometer arrays detect lines of 128 or 246 data points. If measuring moving objects the cameras display the temperature distribution of the surface in two dimensions. Line cameras achieve very fast response times between 128 and 512 lines per second.
Thermal imagers are designed for long-term use in industrial plants for process and quality control. Measuring a lot of different materials in temperature ranges between -20 and 3600°C the cameras are flexible tools. If required the units can be equipped with systems for lens purging and water-cooling.
Depending on the model, the imagers detect the surface temperature of an object with 76,800 or 207,200 pixels and achieve measurement rates between 30 and 60 frames per second.
For detailed information please see:
www.impacinfrared.com/EN/products/thermal-imaging/thermal-imaging.html |
|
Provides support for various monitoring needs from stand-alone to large remotely controlled installations
The TS9100 fixed-mount Infrared Thermal Imager has many applications such as-
- monitoring production line equipment, plant and public facilities;
- prevention of serious accident and fire
- temperature control for production quality improvement
- intruder detection for security The camera has three alarm modes (two for temperature anomalies and one self-malfunction warning) which allow it to operate as a stand-alone unit.
By using one of the interfaces (RS232C -standard, IEEE1394 or Ethernet - optional) a larger system can be configured for remotely controlled monitoring or real-time thermal image transfer. |
|
The narrow angle 9.1° x 6.8° lens enables detection and temperature measurement of small objects over long distances. The IRI 4040 is especially suitable for use in the power utilities industries for the inspection of substation and overhead distribution and transmission lines.
IRISYS has produced an imager that is ideal for the thermographer and maintenance engineer alike; high quality images may be captured and manipulated offline or problems can be resolved on the spot. The camera comes with an industry leading 3 ½" display and delivers price and performance that are unique to IRISYS.
The IRI 4040 is an innovative thermal imager product, which offers outstanding imaging and temperature measurement performance together with the traditional IRISYS features of flexibility, ease of use, and minimal cost of ownership. |
|
FLIR i5 - A small infrared revolution
POINT, CLICK AND SEE THE HEAT
The FLIR i5 is the most compact, lightweight and easy-to-use infrared camera of its class that is currently available on the market.
All you have to do is just point and click to see the heat variations in the environment around you - and find exactly what you are looking for. No matter if you repair fuses, install windows, insulation or heating, ventilation or air conditioning systems.
See what you've been missing
The Infrared imagery is immediately and clearly visible on a full-colour display. You can save your readings as an image for later reference. The combination of advanced Infrared technology and modern digital imaging will make your building and maintenance inspections, as well as damage estimation, a lot easier.
CATCHING THE HEAT OF THE MOMENT
The FLIR i5 visualizes heat differences. Heat, or infrared radiation, is a part of the electromagnetic spectrum that is invisible to the human eye. Infrared radiation (IR) is emitted by every object above a temperature of -273°C. Every object - both living and inanimate - gives off heat as long as its temperature is above absolute zero or -273°C. That means even AC installations and ice cubes.
The human eye cannot detect infrared radiation, but an infrared camera can. It can take pictures of objects to show the amount of heat they are emitting. Such pictures consist of a map of colors that show surface temperatures of the object.
An infrared camera is thus an invaluable diagnostic tool in a variety of industries and applications, as it can detect abnormally hot or cold areas or components. In other words, you can detect problems that are not normally visible with the naked eye.
Infrared at work
Infrared cameras help many industries, sectors, companies, institutions, technicians and workmen finding what they are looking for and solving their problems. Faults, leaks, damages - anything that emits differentiated heat signatures - and in all types of situations and environments.
Our Infrared cameras are ideal to:
- Detect hidden problems
- Assess damages
- Survey moisture and leaks
- Identify energy losses and poor insulation
- Find electrical faults and overheating |
|
Fluke Ti10/Ti25: Latest innovation in affordable thermal imaging
Put problems clearly in the picture
With the rugged and reliable Fluke Ti10/Ti25 Thermal Imagers, you get the advanced problem-finding capability of IR-Fusion® technology. They are a complete and easy-to-use thermal imaging solution for troubleshooting and maintenance of industrial and electrical equipment. |
|
With the PYROVIEW compact DIAS Infrared GmbH offers you a compact fixed-mount infrared camera based on state-of-the-art uncooled microbolometer arrays with up to 384 × 288 pixels with a temperature measurement range from -20 °C to 500 °C and a spectral range of 8 µm to 14 µm.
Different lenses with different aperture angles, optional weather protective housing and the real time data transfer via Ethernet interface with up to 50 frames per second and optional stand alone operation without PC ensure an easy integration into your systems. |
|
DIAS Infrared GmbH as a manufacturer of state-of-the-art infrared cameras offers you an innovative infrared measuring technique for contactless temperature measurement of temperature distributions. The uncooled infrared cameras PYROVIEW with a robust housing are excellently suitable for industrial use.
The newest microbolometer arrays with up to 384 x 288 pixels, different temperature measurement ranges of -20 °C to 1250 °C and spectral ranges 8 µm to 14 µm, 3 µm to 5 µm and 4.8 µm to 5.2 µm guarantee optimal customization to your measurement task. |
|
Benefits
Very fast and complete measuring of the surface
Monitoring of rotating cylinders
Monitoring and control of non-continuous processes
Features
Customized solutions (Hard- and Software)
Simultaneous measuring with 256 detectors
Wide temperature range from 0 °C to 550 °C
Very fast response times from 250 Hz
Focusable lenses from 20 cm to infinite
Spatial resolution from 1.4 mm x 256 detectors
High accuracy (1.0 %) and long term stability
Chopped Radiation Method for highest temperature stability |
|
PYROSCAN18 is a pyrometric camera particularly well suited for displaying the inside of a furnace as well as for measuring, in real time, the temperature of various points in the image, whatever the dust level in the furnace.
The system is widely used in industry for combustion process control.
|
|
Infrared Camera Modules
For Applications in Industry, Process Engineering, HVAC Environments or Security
IR-TCM 384
For express visualization or measurement of heat distribution patterns: The IR-TCM 384 OEM camera module makes temperatures from -40 °C to +2.000 °C visible to the human eye with a resolution of <70 mK. The module registers two-dimensional heat distributions in real time and with a resolution of 384 x 288 pixels.
The IR-TCM 384 provides long-time stability of a level that sets new standards in the IR camera business. Fitted with typically used interfaces and facilities for flexible integration into specific customer software, it can easily be integrated in a variety of OEM applications.
IR-TCM 640
Visualizing or measuring heat distributions with high precision: The IR-TCM 640 OEM camera module generates images in real time with a resolution from 640 x 480 pixels up to 1.2 megapixel . This makes the IR-TCM 640 the first ever high-resolution infrared camera module for commercial applications worldwide.
Via standardized interfaces such as IEEE1394 Firewire, S-/C-Video or RS232 the module can be easily integrated in a multiplicity of applications. It is notably applications in the machine vision or the security sector where the modules image resolution, which is actually on a level with photo quality, yields significant benefits in detection jobs. |
|
| Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement. |
|
| The MIDAS 320L is an extremely light-weight, high-performance handheld infrared camera. It measures the infrared radiation emitted by the target surface and converts this radiation into a two-dimensional image relating to the temperature distribution at the target surface. This temperature distribution can be viewed in full color or grey-scale on the TFT-LCD display or viewfinder. This radiometric camera is ergonomically designed and easy tu use for applications in maintenance, building thermography and developement. |
|
The portable thermal imagers are high resolution infrared cameras for non-contact temperature measurement between -20 and 250°C (IVN 770-P) respectively between -20 and 900°C (IVN 320-P). Their lightweight compact design makes them ideally suited for mobile applications.
The cameras can be used for numerous applications such as building inspection, predictive maintenance and process monitoring.
The IVN 770-P offers today the best price/value ratio for a 320 x 240 pixel camera.
For detailed information please see:
www.impacinfrared.com/EN/products/thermal-imaging/hotspot.html |
|
| The new VarioCAM® high resolution delivers thermal images offering the precice detail resolution you require for demanding applications in industrial research & development. With an image resolution of up to 1.2 megapixel, enabled by Jenoptik's worldwide unique Resolution-Enhancement-Technology, the camera sets new benchmarks in handheld mobile and stationary real-time thermography. VarioCAM®'s high thermal accuracy as well as long-term performance round off the versatile IR camera. |
|
The starter instrument for fast fault-finding and quality assurance
· High-quality wide angle lens 32° x 24° with F1 optics
· Image refresh rate 9 Hz
· Detector 160 x 120
· NETD < 0.1°C
· Manual focus
· Minimum focus distance 10 cm
· Data storage device SD, 1 GB (approx. 800-1.000 images)
Included in delivery
· IR software with integrated report creation
· USB cable
· Li-ion battery
· High-quality, robust case |
|
The result is FLIR Systems’ ThermaCAM™ P65: the perfect choice for maintenance professionals who realize that infrared imaging and measurement can save their companies millions each year. The P65 features everything you need to make well-informed maintenance decisions.
• Outstanding image quality
• Precision non-contact temperature measurement
• Visual and thermal imaging
• Text and voice annotation
• Bluetooth technology
• Auto-focus
• Ergonomic, lightweight and portable
• Wireless communication
• High speed image download
• Fully radiometric JPEG storage
• Burst and AVI recording
• Software for professional inspection reporting |
|
| The established infrared camera series PYROVIEW has been extended by DIAS Infrared GmbH with the new high temperature camera PYROVIEW 640 using a spectral range in the near infrared region. A continuous temperature measurement range from 600°C up to 1500°C is realised with a resolution of 640x480 points and a measuring frequency of 25Hz. Digital data transmission is made via a Fast Ethernet interface. The size of the compact housing is app. 60 x 60 x 160mm³. |
|
The specialist for infrared measurement solutions InfraTec presents VarioCAM® high resolution - the world“s first mobile thermographic camera with a megapixel resolution. Up to (1,280 x 960) infrared pixels and an excellent thermal resolution based on selected detector quality and high-precision lenses provide you with best measurement quality and sharpest thermograms.
Designed for the use in industrial environments VarioCAM® high resolution weights only 1.5 kg. Additionally numerous automatic functions and ease of operation will help you concentrating on your measuring task. Using professional Li-Ion batteries you will be operational for up to three hours.
To get out most of your measurements just integrate visual images taken with the in-built video camera supported by an LED-video light, annotate voice comments or do short infrared videos. Together with the thermographic analysis software IRBIS® the VarioCAM® high resolution will speed up your measurements and analyses resulting in higher precision and efficiency.
|
|
The VIGOcam v50 camera is designed for temperature distribution measurements and recording in technological device diagnostic. It can be used in various scientific and industrial applications, eg. industrial process control, power and building industry, medical diagnostic and scientific research.
The camera is constructed with the use of a 384 x 288 microbolometric detector array. The new generation, 35 μm pixel, detector array and excellent optics ensure high thermal sensitivity (NETD: 0.08°C @ 30°C) and spatial resolution (1 mrad) of the camera.
The VIGOcam v50 camera is equipped with 3.5" LCD display, video camera, laser pointer, radio link that enables remote control, SD memory card reader, microphone and loudspeaker. Connection with a PC computer is possible via USB or Ethernet port.
The data sent to a PC computer can be processed with sophisticated THERM v50 software which offers various analytical functions to process temperature distribution data including charts, histograms within user-defined regions and report generator. The camera and it's software could be easily adjusted to the customer's specific requirements. |
|
Infrared thermography is a powerful and non-invasive technique to monitor and diagnose the condition of buildings. Common applications for infrared in the building industry include detecting areas susceptible to mold build-up, finding badly insulated areas, supervising new constructions, finding leaks in underground pipes, planning redevelopments and many others.
The results of using infrared are often considerable energy savings, minimization of repair damage and other cost savings resulting in a rapid return on investment of the infrared camera.
To meet the specific needs of the demanding building industry FLIR Systems has teamed up with professional and experienced building inspectors and has developed the ThermaCAM™ B20. The result is an infrared camera, which has all the features that are indispens-able when doing infrared building inspections, and the necessary software to make professional inspection reports. |
|
ThermaCAM™ S65
The ThermaCAM S65 is a rugged (IP 54) infrared camera designed especially for Research and Development, scientific testing and general-purpose non-contact measurement. Hand-held or mounted on a tripod, operated locally or by remote control, with optional lenses and/or filters, the ThermaCAM S65 can be configured to meet a variety of scientific applications. |
|
| Raytek announces the launch of its new GS110 Infrared Thermal Imaging System for Low Emissivity (Low-E) Glass. This system is specifically designed to monitor one-side coated flat glass during the tempering process. The GS110 scanns the topside of the glass and measures simultaneously the temperature on the uncoated side of the glass where the emissivity is both known and significantly higher. The measured data are transferred to the Windows-based GS110 software which is included in the GS110 system. The software automatically corrects the thermal image of the topside of the glass to provide a more accurate result. Further, the GS110 allows the user to set-up predefined recipes to accommodate frequent product changes typical in glass processes. OPC server functionality is included as an integral part of the proprietary software allowing for seamless integration of the data into other process control software packages. By quickly detecting thermal irregularities within the glass and identifying defective heating elements, the GS110 allows glass processors to improve product quality and uniformity, and to reduce scrap. The GS110 can be used for non-contact infrared temperature measurement in other secondary glass-processing applications such as bending, forming, and annealing. |
|
| Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement. |
|
| With the new PYROVIEW 380L compact DIAS Infrared GmbH offers a small robust infrared camera for measurement of temperature distributions in laboratories as well as factories. This camera with an uncooled microbolometer array has a geometrical resolution of 384 x 288 pixels and a thermal resolution of 0.08°C. The data are transferred via Ethernet interface with a maximum frame rate of 50 frames per second. Temperature measurements, e.g. for development and research purposes may be done with an excellent time and geometrical resolution for a reasonable price. |
|
| The Phoenix is the perfect choice for any infrared industrial, scientific, non-destructive testing or military application that requires the highest flexibility and performance. The Phoenix features 14-bit extended dynamic range, snapshot exposure mode, high frame rate capability and excellent resolution within a small, rugged package. The Phoenix is a modular system, consisting of a camera head and a signal processing electronics back end, the Real-Time Imaging Electronics (RTIE) or Data Acquisition System (DAS). |
|
DIAS Infrared GmbH, manufacturer of state-of-the-art infrared cameras, offers adapted infrared measurement techniques for contactless temperature measurement.
Uncooled infrared line cameras PYROLINE with robust, optional water cooled housing and air purge are well suited for industrial process measurement. Linear arrays up to 256 pixels and measuring frequencies of up to 512 Hz, different temperature measurement ranges of 0 °C to 1300 °C and spectral ranges eligible for 8 µm to 14 µm, 3 µm to 5 µm, 4.8 µm to 5.2 µ m or 1.4 µm to 1.8 µm guarantee the optimal solution of your temperature measurement tasks. |
|
| The ThermoVision A10 is a rugged and very compact low-cost infrared imager. It is designed for those applications that require excellent thermal image quality, compact size and low weight but where exact temperature measurements are not needed. This unique, robust little camera is perfect for stand-alone imaging applications, or as an OEM core where space, weight and/or power are constraints and performance is critical. It is ideal for industrial process monitoring, fire detection/prevention, robotics, machine vision, and security and surveillance applications. |
|
|
